Characterization of modified sawdust, kinetic and equilibrium study about methylene blue adsorption in batch mode

2013 ◽  
Vol 30 (1) ◽  
pp. 111-122 ◽  
Author(s):  
Weihua Zou ◽  
Hongjuan Bai ◽  
Shuaipeng Gao ◽  
Ke Li
2010 ◽  
Vol 79 (4) ◽  
pp. 1140-1149 ◽  
Author(s):  
Runping Han ◽  
Lijun Zhang ◽  
Chen Song ◽  
Manman Zhang ◽  
Huimin Zhu ◽  
...  

2019 ◽  
Vol 276 ◽  
pp. 570-576 ◽  
Author(s):  
Hugo H.C. Lima ◽  
Rogério S. Maniezzo ◽  
Maria E.G. Llop ◽  
Vincente L. Kupfer ◽  
Pedro A. Arroyo ◽  
...  

2014 ◽  
Vol 699 ◽  
pp. 221-226
Author(s):  
Nurul Hanim Razak ◽  
Md. Razali Ayob ◽  
M.A.M. Zainin ◽  
M.Z. Hilwa

Eggshells and rice husk, two types of notable agricultural waste were used as bioadsorbent to remove Methylene Blue dye (MBD) in aqueous solution. This study was to investigate the performance of these two bioadsorbents in removing MBD. The removal percentage, adsorption capacity, and porosity characterization were examined. The method applied was a physical filtration. UV-VIS Spectrophotometer was used to determine the efficiency of the bioadsorbents in MBD adsorption. The highest removal percentage at the most concentrated MBD were 51% and 98% for eggshells and rice husks respectively. Meanwhile the characterization of rice husks pore size and volume proves that higher adsorptivity towards dye compares to eggshells porosity. It was concluded that the eggshells and rice husks bioadsorbents was successful to treat industrial textile wastewater with rice husks as the most efficient bioadsorbent in removing MBD.


2020 ◽  
Vol 841 ◽  
pp. 273-277
Author(s):  
Ariany Zulkania ◽  
Muhammad Iqbal ◽  
Syamsumarlin

In this study, two types of adsorbent including activated carbon and bio-sorbent were produced from Palm fiber wastes (PFW), which were activated by phosphoric acid. The influence of adsorbent type and phosphoric acid concentration on methylene blue adsorption was investigated. The most optimum adsorbent was determined based on adsorption capacity and removal percentage of each adsorbent. The result shows that 9.984 mg/g of adsorption capacity and 99.84% of removal percentage were achieved in 90 minutes’ adsorption, which demonstrates the huge potential of bio-sorbent and was chosen to be the most optimum adsorbent based on methylene blue removal. The characterization of bio-sorbent was then investigated using FTIR and SEM. FTIR result shows that bio-sorbent contains cellulose which affected the adsorption process while SEM result shows the cleaner pores and surface compared to bio-sorbent before activation.


2020 ◽  
Vol 22 ◽  
pp. 22-27
Author(s):  
Lahcen Bouna ◽  
Abdellah Ait El Fakir ◽  
Abdeljalil Benlhachemi ◽  
Khalid Draoui ◽  
Sylvie Villain ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document