Fabrication and characterization of polysiloxane/polyacrylate composite latexes with balanced water vapor permeability and mechanical properties: effect of silane coupling agent

2017 ◽  
Vol 15 (1) ◽  
pp. 165-173 ◽  
Author(s):  
Jie Shen ◽  
Yang Hu ◽  
Ling-Xiao Li ◽  
Jian-wu Sun ◽  
Cheng-you Kan
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Silane Coupling ◽  
Fabrication And Characterization

scholarly journals Elaboration and Characterization of Active Apple Starch Films Incorporated with Ellagic Acid

Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 384
Author(s):  
Juan Tirado-Gallegos ◽  
Paul Zamudio-Flores ◽  
José Ornelas-Paz ◽  
Claudio Rios-Velasco ◽  
Guadalupe Olivas Orozco ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Vapor ◽  
Antioxidant Capacity ◽  
Ellagic Acid ◽  
Uv Light ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Starch Films

Apple starch films were obtained from apples harvested at 60, 70, 80 and 90 days after full bloom (DAFB). Mechanical properties and water vapor permeability (WVP) were evaluated. The apple starch films at 70 DAFB presented higher values in the variables of tensile strength (8.12 MPa), elastic modulus (3.10 MPa) and lower values of water vapor permeability (6.77 × 10−11 g m−1 s−1 Pa−1) than apple starch films from apples harvested at 60, 80 and 90 DAFB. Therefore, these films were chosen to continue the study incorporating ellagic acid (EA). The EA was added at three concentrations [0.02% (FILM-EA0.02%), 0.05% (FILM-EA0.05%) and 0.1% (FILM-EA0.1%) w/w] and compared with the apple starch films without EA (FILM-Control). The films were characterized by their physicochemical, optical, morphological and mechanical properties. Their thermal stability and antioxidant capacity were also evaluated. The FILM-Control and FILM-EA0.02% showed a uniform surface, while FILM-EA0.05% and FILM-EA0.1% showed a rough surface and insoluble EA particles. Compared to FILM-Control, EA modified the values of tensile strength, elasticity modulus and elongation at break. The antioxidant capacity increased as EA concentration did. EA incorporation allowed obtaining films with higher antioxidant capacity, capable of blocking UV light with better mechanical properties than film without EA.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

Fabrication of Composite Films Based on Chitosan and Vegetable-Tanned Collagen Fibers Crosslinked with Genipin

2021 ◽  
Vol 116 (10) ◽  
Author(s):  
Jie Liu ◽  
Yanchun Liu ◽  
Eleanor M. Brown ◽  
Zhengxin Ma ◽  
Cheng-Kung Liu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Water Vapor ◽  
Composite Film ◽  
Composite Films ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Leather Industry ◽  
Compact Structure

The leather industry generates considerable amounts of solid waste and raises many environmental concerns during its disposal. The presence of collagen in these wastes provides a potential protein source for the fabrication of bio-based value-added products. Herein, a novel composite film was fabricated by incorporating vegetable-tanned collagen fiber (VCF), a mechanically ground powder-like leather waste, into a chitosan matrix and crosslinked with genipin. The obtained composite film showed a compact structure and the hydrogen bonding interactions were confirmed by FTIR analysis, indicating a good compatibility between chitosan and VCF. The optical properties, water absorption capacity, thermal stability, water vapor permeability and mechanical properties of the composite films were characterized. The incorporation of VCF into chitosan led to significant decreases in opacity and solubility of the films. At the same time, the mechanical properties, water vapor permeability and thermal stability of the films were improved. The composite film exhibited antibacterial activity against food-borne pathogens. Results from this research indicated the potential of the genipin-crosslinked chitosan/VCF composites for applications in antimicrobial packaging. 

Effect of Polymeric Coupling Agent on Mechanical Properties of Kenaf Fiber / Polystyrene Composites

2012 ◽  
Vol 268-270 ◽  
pp. 127-133
Author(s):  
Chen Zheng ◽  
Yan Yan Xu ◽  
Takahiko Kawai ◽  
Shin-ichi Kuroda
Keyword(s):  
Mechanical Properties ◽  
Water Uptake ◽  
Uptake Rate ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Solvent System ◽  
Kenaf Fiber ◽  
Silane Coupling ◽  
Polymeric Silane ◽  
Remarkable Reduction

In order to improve the properties and the processability of kenaf fiber (KF) / polystyrene (PS) composites, the newly synthesized polymeric silane coupling agent (CA) was utilized and evaluated. KFs were reacted with CA in the melt system and in the solvent system. The composites reinforced by the modified KF showed enhanced mechanical properties compared with those reinforced by the unmodified KF. The effect was especially remarkable when the KF was modified with CA in the solvent system. As the CA content increases, the surface of KF recovered from the composites showed the higher Si / C ratio indicating the good reaction between KF and CA. The modified composites also showed a remarkable reduction in water uptake rate.

Study on the Application of Silane Coupling Agent in Rice Straw/Poly(butylene Succinate) Composites

2011 ◽  
Vol 675-677 ◽  
pp. 361-364 ◽  
Author(s):  
Yang Zhao ◽  
Jian Hui Qiu ◽  
Hui Xia Feng ◽  
Guo Hong Zhang ◽  
Liang Shao
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Rice Straw ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Fracture Strain ◽  
Molding Machine ◽  
Butylene Succinate ◽  
Silane Coupling ◽  
Properties Of Composites

Rice straw/Poly(butylene succinate)(PBS) composites were prepared by injection molding machine. The influence of content and particle size of rice straw on the mechanical properties of composites indicated that with the increase of rice straw content the tensile strength and fracture strain of the composites was decreased. With the same content of rice straw, the smaller particle size, the more obvious decreased. The influence of dosage of silane coupling agent(SCA) on the composites was studied, the result indicated that with the increase of SCA content, the interface of composite materials significantly improved, the Young’s modulus increased 362% after rice straw was treated by SCA. Thermal analysis showed that the adding of coupling agent didn’t undermine the thermodynamic stability of the composites.

Preparation and characterization of fibrous sepiolite modified silane coupling agent/fluororubber nanocomposite

2015 ◽  
Vol 38 ◽  
pp. E208-E213 ◽  
Author(s):  
Puxuan Yan ◽  
Yufeng Wang ◽  
Mengyi Wang ◽  
Jiangrong Lu ◽  
Feixue Han
Keyword(s):  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Silane Coupling

Interfacial and Mechanical Properties of Continuous Fiber-Reinforced PP via Pre Impregnated Winding

2017 ◽  
Vol 25 (1) ◽  
pp. 23-28 ◽  
Author(s):  
Jiuqiang Song ◽  
Yan Qin ◽  
Jia Chen ◽  
Siwen Qin
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Glass Fiber ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Fiber Reinforced ◽  
Continuous Glass ◽  
Continuous Glass Fiber ◽  
Glass Fiber Reinforced ◽  
Silane Coupling

In this paper, a continuous glass fiber-reinforced polypropylene prepreg was prepared by fiber treatment with a silane coupling agent and MAH-g-PP resin. Continuous glass fiber-reinforced polypropylene sheets were made from prepreg and PP mats by hot-pressing; they displayed exceptional performance. This paper studies the effects of maleic anhydride grafting on the polypropylene crystallinity and MAH-g-PP content in the prepreg, and the mechanical properties of the composites. The results showed that modifying PP with maleic anhydride decreased the tacticity of the polypropylene molecular chain, which reduced the crystallinity and melting point. An excellent interface formed between the polypropylene and fiber after the glass fiber was treated with a silane coupling agent and MAH-g-PP resin. The mechanical properties of the polymer materials displayed more favorable properties as MAH-g-PP content increased; the ideal MAH-g-PP content was 50%.

Sign in / Sign up

Export Citation Format

Share Document