Partial wrinkle generation for switchable attachment and high adhesion hysteresis

2017 ◽  
Vol 18 (1) ◽  
pp. 133-137 ◽  
Author(s):  
Seong Min Kang ◽  
Jeong Hun Kim ◽  
Sang Moon Kim
Keyword(s):  
High Adhesion ◽  
Wrinkle Generation

scholarly journals Ultra-strong bio-glue from genetically engineered polypeptides

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chao Ma ◽  
Jing Sun ◽  
Bo Li ◽  
Yang Feng ◽  
Yao Sun ◽  
...  
Keyword(s):  
Soft Tissues ◽  
Covalent Bond ◽  
Genetically Engineered ◽  
Supramolecular Interactions ◽  
Molar Ratio ◽  
High Adhesion ◽  
Strong Adhesion ◽  
Order Of Magnitude

AbstractThe development of biomedical glues is an important, yet challenging task as seemingly mutually exclusive properties need to be combined in one material, i.e. strong adhesion and adaption to remodeling processes in healing tissue. Here, we report a biocompatible and biodegradable protein-based adhesive with high adhesion strengths. The maximum strength reaches 16.5 ± 2.2 MPa on hard substrates, which is comparable to that of commercial cyanoacrylate superglue and higher than other protein-based adhesives by at least one order of magnitude. Moreover, the strong adhesion on soft tissues qualifies the adhesive as biomedical glue outperforming some commercial products. Robust mechanical properties are realized without covalent bond formation during the adhesion process. A complex consisting of cationic supercharged polypeptides and anionic aromatic surfactants with lysine to surfactant molar ratio of 1:0.9 is driven by multiple supramolecular interactions enabling such strong adhesion. We demonstrate the glue’s robust performance in vitro and in vivo for cosmetic and hemostasis applications and accelerated wound healing by comparison to surgical wound closures.

scholarly journals Preparation and Properties of Electrospun Phenylethynyl—Terminated Polyimide Nano-Fibrous Membranes with Potential Applications as Solvent-Free and High-Temperature Resistant Adhesives for Harsh Environments

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1525
Author(s):  
Hao-ran Qi ◽  
Deng-xiong Shen ◽  
Yan-jiang Jia ◽  
Yuan-cheng An ◽  
Hao Wu ◽  
...  
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Solvent Free ◽  
High Tech ◽  
Molecular Weights ◽  
Lap Shear ◽  
High Adhesion ◽  
Potential Applications ◽  
Fibrous Membranes

High-temperature-resistant polymeric adhesives with high servicing temperatures and high adhesion strengths are highly desired in aerospace, aviation, microelectronic and other high-tech areas. The currently used high-temperature resistant polymeric adhesives, such as polyamic acid (PAA), are usually made from the high contents of solvents in the composition, which might cause adhesion failure due to the undesirable voids caused by the evaporation of the solvents. In the current work, electrospun preimidized polyimide (PI) nano-fibrous membranes (NFMs) were proposed to be used as solvent-free or solvent-less adhesives for stainless steel adhesion. In order to enhance the adhesion reliability of the PI NFMs, thermally crosslinkable phenylethynyl end-cappers were incorporated into the PIs derived from 3,3’,4,4’-oxydiphthalic anhydride (ODPA) and 3,3-bis[4-(4-aminophenoxy)phenyl]phthalide (BAPPT). The derived phenylethynyl-terminated PETI-10K and PETI-20K with the controlled molecular weights of 10,000 g mol−1 and 20,000 g mol−1, respectively, showed good solubility in polar aprotic solvents, such as N-methyl-2-pyrrolidinone (NMP) and N,N-dimethylacetamide (DMAc). The PI NFMs were successfully fabricated by electrospinning with the PETI/DMAc solutions. The ultrafine PETI NFMs showed the average fiber diameters (dav) of 627 nm for PETI-10K 695 nm for PETI-20K, respectively. The PETI NFMs showed good thermal resistance, which is reflected in the glass transition temperatures (Tgs) above 270 °C. The PETI NFMs exhibited excellent thermoplasticity at elevated temperatures. The stainless steel adherends were successfully adhered using the PETI NFMs as the adhesives. The PI NFMs provided good adhesion to the stainless steels with the single lap shear strengths (LSS) higher than 20.0 MPa either at room temperature (25 °C) or at an elevated temperature (200 °C).

scholarly journals Optimisation of Mechanical Properties of Gradient Zr–C Coatings

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 296
Author(s):  
Łukasz Szparaga ◽  
Przemysław Bartosik ◽  
Adam Gilewicz ◽  
Katarzyna Mydłowska ◽  
Jerzy Ratajski
Keyword(s):  
Adhesive Layer ◽  
Scratch Test ◽  
Deposition Process ◽  
Functionally Graded ◽  
Wear Properties ◽  
Mechanical And Tribological Properties ◽  
High Adhesion ◽  
Graded Material ◽  
Residual Stresses And Strains ◽  
Optimisation Procedure

One of the key components of the designing procedure of a structure of hard anti-wear coatings deposited via Physical Vapour Deposition (PVD) is the analysis of the stress and strain distributions in the substrate/coating systems, initiated during the deposition process and by external mechanical loads. Knowledge of residual stress development is crucial due to their significant influence on the mechanical and tribological properties of such layer systems. The main goal of the work is to find the optimal functionally graded material (FGM) coating’s structure, composed of three functional layers: (1) adhesive layer, providing high adhesion of the coating to the substrate, (2) gradient load support and crack deflection layer, improving hardness and enhancing fracture toughness, (3) wear-resistant top layer, reducing wear. In the optimisation procedure of the coating’s structure, seven decision criteria basing on the state of residual stresses and strains in the substrate/coating system were proposed. Using finite element simulations and postulated criteria, the thickness and composition gradients of the transition layer in FGM coating were determined. In order to verify the proposed optimisation procedure, Zr-C coatings with different spatial distribution of carbon concentration were produced by the Reactive Magnetron Sputtering PVD (RMS PVD) method and their anti-wear properties were assessed by scratch test and ball-on-disc tribological test.

Fabrication of PVA/PAAm IPN hydrogel with high adhesion and enhanced mechanical properties for body sensors and antibacterial activity

2021 ◽  
Vol 146 ◽  
pp. 110253
Author(s):  
Zhenghao Li ◽  
Wenlong Xu ◽  
Xinhao Wang ◽  
Wenqing Jiang ◽  
Xiaolong Ma ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Antibacterial Activity ◽  
High Adhesion ◽  
Body Sensors

scholarly journals Multilayer Diamond Coatings Applied to Micro-End-Milling of Cemented Carbide

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3333
Author(s):  
Eduardo L. Silva ◽  
Sérgio Pratas ◽  
Miguel A. Neto ◽  
Cristina M. Fernandes ◽  
Daniel Figueiredo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
End Milling ◽  
Interfacial Stress ◽  
Cemented Carbide ◽  
Air Cooling ◽  
Micro Machining ◽  
Diamond Coatings ◽  
Wear Properties ◽  
High Adhesion ◽  
Micro End Milling

Cobalt-cemented carbide micro-end mills were coated with diamond grown by chemical vapor deposition (CVD), with the purpose of micro-machining cemented carbides. The diamond coatings were designed with a multilayer architecture, alternating between sub-microcrystalline and nanocrystalline diamond layers. The structure of the coatings was studied by transmission electron microscopy. High adhesion to the chemically pre-treated WC-7Co tool substrates was observed by Rockwell C indentation, with the diamond coatings withstanding a critical load of 1250 N. The coated tools were tested for micro-end-milling of WC-15Co under air-cooling conditions, being able to cut more than 6500 m over a period of 120 min, after which a flank wear of 47.8 μm was attained. The machining performance and wear behavior of the micro-cutters was studied by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Crystallographic analysis through cross-sectional selected area electron diffraction patterns, along with characterization in dark-field and HRTEM modes, provided a possible correlation between interfacial stress relaxation and wear properties of the coatings. Overall, this work demonstrates that high adhesion of diamond coatings can be achieved by proper combination of chemical attack and coating architecture. By preventing catastrophic delamination, multilayer CVD diamond coatings are central towards the enhancement of the wear properties and mechanical robustness of carbide tools used for micro-machining of ultra-hard materials.

scholarly journals Wettability control of polymeric microstructures replicated from laser-patterned stamps

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Yangxi Fu ◽  
Marcos Soldera ◽  
Wei Wang ◽  
Stephan Milles ◽  
Kangfa Deng ◽  
...  
Keyword(s):  
Contact Angle Hysteresis ◽  
Contact Angles ◽  
Spatial Period ◽  
Structured Surfaces ◽  
High Adhesion ◽  
Direct Laser ◽  
Periodic Microstructures ◽  
Structure Height ◽  
Direct Laser Interference Patterning ◽  
Micropillar Arrays

AbstractIn this study, two-step approaches to fabricate periodic microstructures on polyethylene terephthalate (PET) and poly(methyl methacrylate) (PMMA) substrates are presented to control the wettability of polymeric surfaces. Micropillar arrays with periods between 1.6 and 4.6 µm are patterned by plate-to-plate hot embossing using chromium stamps structured by four-beam Direct Laser Interference Patterning (DLIP). By varying the laser parameters, the shape, spatial period, and structure height of the laser-induced topography on Cr stamps are controlled. After that, the wettability properties, namely the static, advancing/receding contact angles (CAs), and contact angle hysteresis were characterized on the patterned PET and PMMA surfaces. The results indicate that the micropillar arrays induced a hydrophobic state in both polymers with CAs up to 140° in the case of PET, without modifying the surface chemistry. However, the structured surfaces show high adhesion to water, as the droplets stick to the surfaces and do not roll down even upon turning the substrates upside down. To investigate the wetting state on the structured polymers, theoretical CAs predicted by Wenzel and Cassie-Baxter models for selected structured samples with different topographical characteristics are also calculated and compared with the experimental data.

scholarly journals Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 820
Author(s):  
Beibei Han ◽  
Mengyuan Yan ◽  
Dongying Ju ◽  
Maorong Chai ◽  
Susumu Sato
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Behavior ◽  
Metal Ion ◽  
Ion Beam ◽  
Titanium Substrate ◽  
Corrosion Current ◽  
Ion Concentration ◽  
Bipolar Plates ◽  
High Adhesion ◽  
Corrosion Behaviors

The amorphous hydrogenated (a-C:H) film-coated titanium, using different CH4/H2 and deposition times, was prepared by the ion beam deposition (IBD) method, which has the advantage of high adhesion because of the graded interface mixes at the atomic level. The chemical characterizations and corrosion behaviors of a-C:H film were investigated and evaluated by SEM, AFM, Raman spectroscopy, EPMA, TEM and XPS. An a-C:H film-coated titanium was corroded at 0.8 V, 90 °C in a 0.5 mol/L H2SO4 solution for 168 h. The metal ion concentration in the H2SO4 corrosion solution and the potentiodynamic polarization behavior were evaluated. Results indicate that a higher CH4/H2 of 1:0 and a deposition time of 12 h can result in a minimum ID/IG ratio of 0.827, Ra of 5.76 nm, metal ion concentration of 0.34 ppm in the corrosion solution and a corrosion current of 0.23 µA/cm2. The current density in this work meets the DOE’s 2020 target of 1 µA/cm2. Electrical conductivity is inversely proportional to the corrosion resistance. The significant improvement in the corrosion resistance of the a-C:H film was mainly attributed to the increased sp3 element and nanocrystalline TiC phase in the penetration layer. As a result, the a-C:H film-coated titanium at CH4/H2 = 1:0 with improved anti-corrosion behavior creates a great potential for PEMFC bipolar plates.

scholarly journals Protective Film of High Adhesion Type for Optical Sheet

2011 ◽  
Vol 47 (12) ◽  
pp. 485-490
Author(s):  
Katsunori TOYOSHIMA ◽  
Yasuyuki IEDA ◽  
Hajime NOSETANI ◽  
Hiroshi TADA
Keyword(s):  
Protective Film ◽  
High Adhesion

scholarly journals Cancer stem cell-like SP cells have a high adhesion ability to the peritoneum in gastric carcinoma

2009 ◽  
Vol 100 (8) ◽  
pp. 1397-1402 ◽  
Author(s):  
Takafumi Nishii ◽  
Masakazu Yashiro ◽  
Osamu Shinto ◽  
Tetsuji Sawada ◽  
Masaichi Ohira ◽  
...  
Keyword(s):  
Stem Cell ◽  
Gastric Carcinoma ◽  
Cancer Stem Cell ◽  
Adhesion Ability ◽  
High Adhesion

Atomic Force Microscopic Observations of Diamond-like Carbon (DLC) Films Produced by Plasma Immersion and Fibroblasts Cultured on DLC

2005 ◽  
Vol 11 (S03) ◽  
pp. 82-85 ◽  
Author(s):  
E. T. Uzumaki ◽  
C. S. Lambert ◽  
A. R. Santos Jr. ◽  
C. A. C. Zavaglia
Keyword(s):  
Corrosion Resistance ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Three Dimensional ◽  
Chemical Vapour ◽  
High Wear Resistance ◽  
Diamond Like Carbon ◽  
Good Adhesion ◽  
Dlc Coatings ◽  
High Adhesion

Diamond-like carbon (DLC) films have been intensively studied with a view to improving orthopaedic implants. Studies have indicated smoothness of the surface, low friction, high wear resistance, corrosion resistance and biocompatibility [1-4]. DLC coatings can be deposited using various techniques, such as plasma assisted chemical vapour deposition (PACVD), magnetron sputtering, laser ablation, and others [5]. However it has proved difficult to obtain films which exhibit good adhesion. The plasma immersion process, unlike the conventional techniques, allows the deposition of DLC on three-dimensional workpieces, even without moving the sample, without an intermediate layer, and with high adhesion [6], an important aspect for orthopaedic articulations. In our previous work, DLC coatings were deposited on silicon and Ti-13Nb-13Zr alloy substrates using the plasma immersion process for the characterization of microstructure, mechanical properties and corrosion behaviour [7-9]. Hardness, measured by a nanoindenter, ranged from 16.4-17.6 GPa, the pull test results indicate the good adhesion of DLC coatings to Ti-13Nb-13Zr, and electrochemical assays (polarization test and electrochemical impedance spectroscopy) indicate that DLC coatings produced by plasma immersion can improve the corrosion resistance [9].

Sign in / Sign up

Export Citation Format

Share Document