scholarly journals Thrust measurements and evaluation of asymmetric infrared laser resonators for space propulsion

Author(s):  
O. Neunzig ◽  
M. Weikert ◽  
M. Tajmar

AbstractSince modern propulsion systems are insufficient for large-scale space exploration, a breakthrough in propulsion physics is required. Amongst different concepts, the EMDrive is a proposed device claiming to be more efficient in converting energy into propulsive forces than classical photon momentum exchange. It is based on a microwave resonator inside a tapered cavity. Recently, Taylor suggested using a laser instead of microwaves to boost thrust by many orders of magnitude due to the higher quality factor of optical resonators. His analysis was based on the theory of quantised inertia by McCulloch, who predicted that an asymmetry in mass surrounding the device and/or geometry is responsible for EMDrive-like forces. We put this concept to the test in a number of different configurations using various asymmetrical laser resonators, reflective cavities of different materials and size as well as fiber-optic loops, which were symmetrically and asymmetrically shaped. A dedicated high precision thrust balance was developed to test all these concepts with a sensitivity better than pure photon thrust, which is the force equivalent to the radiation pressure of a laser for the same power that is used to operate each individual devices. In summary, all devices showed no net thrust within our resolution at the Nanonewton range, meaning that any anomalous thrust must be below state-of-the-art propellantless propulsion. This puts strong limits on all proposed theories like quantised inertia by at least 4 orders of magnitude for the laboratory-scale geometries and power levels used with worst case assumptions for the theoretical predictions.

2018 ◽  
Vol 16 (1) ◽  
pp. 67-76
Author(s):  
Disyacitta Neolia Firdana ◽  
Trimurtini Trimurtini

This research aimed to determine the properness and effectiveness of the big book media on learning equivalent fractions of fourth grade students. The method of research is Research and Development  (R&D). This study was conducted in fourth grade of SDN Karanganyar 02 Kota Semarang. Data sources from media validation, material validation, learning outcomes, and teacher and students responses on developed media. Pre-experimental research design with one group pretest-posttest design. Big book developed consist of equivalent fractions material, students learning activities sheets with rectangle and circle shape pictures, and questions about equivalent fractions. Big book was developed based on students and teacher needs. This big book fulfill the media validity of 3,75 with very good criteria and scored 3 by material experts with good criteria. In large-scale trial, the result of students posttest have learning outcomes completness 82,14%. The result of N-gain calculation with result 0,55 indicates the criterion “medium”. The t-test result 9,6320 > 2,0484 which means the average of posttest outcomes is better than the average of pretest outcomes. Based on that data, this study has produced big book media which proper and effective as a media of learning equivalent fractions of fourth grade elementary school.


ROBOT ◽  
2011 ◽  
Vol 33 (4) ◽  
pp. 434-439 ◽  
Author(s):  
Dangyang JIE ◽  
Fenglei NI ◽  
Yisong TAN ◽  
Hong LIU ◽  
Hegao CAI

2021 ◽  
Vol 9 (3) ◽  
pp. 264
Author(s):  
Shanti Bhushan ◽  
Oumnia El Fajri ◽  
Graham Hubbard ◽  
Bradley Chambers ◽  
Christopher Kees

This study evaluates the capability of Navier–Stokes solvers in predicting forward and backward plunging breaking, including assessment of the effect of grid resolution, turbulence model, and VoF, CLSVoF interface models on predictions. For this purpose, 2D simulations are performed for four test cases: dam break, solitary wave run up on a slope, flow over a submerged bump, and solitary wave over a submerged rectangular obstacle. Plunging wave breaking involves high wave crest, plunger formation, and splash up, followed by second plunger, and chaotic water motions. Coarser grids reasonably predict the wave breaking features, but finer grids are required for accurate prediction of the splash up events. However, instabilities are triggered at the air–water interface (primarily for the air flow) on very fine grids, which induces surface peel-off or kinks and roll-up of the plunger tips. Reynolds averaged Navier–Stokes (RANS) turbulence models result in high eddy-viscosity in the air–water region which decays the fluid momentum and adversely affects the predictions. Both VoF and CLSVoF methods predict the large-scale plunging breaking characteristics well; however, they vary in the prediction of the finer details. The CLSVoF solver predicts the splash-up event and secondary plunger better than the VoF solver; however, the latter predicts the plunger shape better than the former for the solitary wave run-up on a slope case.


Author(s):  
Lei Zhou ◽  
Siyu Zhu ◽  
Tianwei Shen ◽  
Jinglu Wang ◽  
Tian Fang ◽  
...  

2012 ◽  
Vol 8 (S291) ◽  
pp. 375-377 ◽  
Author(s):  
Gregory Desvignes ◽  
Ismaël Cognard ◽  
David Champion ◽  
Patrick Lazarus ◽  
Patrice Lespagnol ◽  
...  

AbstractWe present an ongoing survey with the Nançay Radio Telescope at L-band. The targeted area is 74° ≲ l < 150° and 3.5° < |b| < 5°. This survey is characterized by a long integration time (18 min), large bandwidth (512 MHz) and high time and frequency resolution (64 μs and 0.5 MHz) giving a nominal sensitivity limit of 0.055 mJy for long period pulsars. This is about 2 times better than the mid-latitude HTRU survey, and is designed to be complementary with current large scale surveys. This survey will be more sensitive to transients (RRATs, intermittent pulsars), distant and faint millisecond pulsars as well as scintillating sources (or any other kind of radio faint sources) than all previous short-integration surveys.


Author(s):  
Willem Vos ◽  
Petter Norli ◽  
Emilie Vallee

This paper describes a novel technique for the detection of cracks in pipelines. The proposed in-line inspection technique has the ability to detect crack features at random angles in the pipeline, such as axial, circumferential, and any angle in between. This ability is novel to the current ILI technology offering and will also add value by detecting cracks in deformed pipes (i.e. in dents), and cracks associated with the girth weld (mid weld cracks, rapid cooling cracks and cracks parallel to the weld). Furthermore, the technology is suitable for detection of cracks in spiral welded pipes, both parallel to the spiral weld as well as perpendicular to the weld. Integrity issues around most features described above are not addressed with ILI tools, often forcing operators to perform hydrostatic tests to ensure pipeline safety. The technology described here is based on the use of wideband ultrasound inline inspection tools that are already in operation. They are designed for the inspection of structures operating in challenging environments such as offshore pipelines. Adjustments to the front-end analog system and data collection from a grid of transducers allow the tools to detect cracks in any orientation in the line. Description of changes to the test set-up are presented as well as the theoretical background behind crack detection. Historical development of the technology will be presented, such as early laboratory testing and proof of concept. The proof of concept data will be compared to the theoretical predictions. A detailed set of results are presented. These are from tests that were performed on samples sourced from North America and Europe which contain SCC features. Results from ongoing testing will be presented, which involved large-scale testing on SCC features in gas-filled pipe spools.


Sign in / Sign up

Export Citation Format

Share Document