Effect of process parameters of microwave-assisted hot air drying on characteristics of fried black gram papad

Author(s):  
Pratik S. Gaikwad ◽  
Akash Pare ◽  
C. K. Sunil
2013 ◽  
Vol 12 (21) ◽  
pp. 6154-6158
Author(s):  
Xiao Kang-Yi ◽  
Chuan Feng-Li ◽  
Shu Gang-Li ◽  
He Lei Cui ◽  
Wen Fu-Wu

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Ernest Abano

Microwave and steam blanching as pretreatments to hot air drying of orange-fleshed sweet potato (OFSP) were studied. The air-drying experiment was performed at constant temperature of 70°C and airflow of 1.0 m/s. The effective moisture diffusivity varied from 1.5 × 10 − 9 to 4.4 × 10 − 9 m2/s, and 1.1 × 10 − 10 to 7.9 × 10 − 10 m2/s, for the microwave and blanched assisted hot air drying, respectively. The activation energy obtained for the various microwave-assisted hot air drying was 29.1 W/mm for 4 min, 68.1 W/mm for 3 min, and 79.7 W/mm for 2 min. Ascorbic acid degradation and formation of brown pigments in the OFSP slices were lower in microwave than in steam blanch-assisted drying. Microwave-assisted drying of OFSP is best governed by Page model, M R = exp − k t n , while the blanch-assisted followed the logarithmic model, M R = a   exp − k t + c . To produce better quality OFSP flour, it is recommended to cut the tubers into 3 mm slices, microwave at a power of 630 W for 2 min or blanch for 1 min, 43 seconds prior to hot air drying.


LWT ◽  
2021 ◽  
Vol 137 ◽  
pp. 110413
Author(s):  
Wanxiu Xu ◽  
Md Nahidul Islam ◽  
Xiaohuang Cao ◽  
Jinghong Tian ◽  
Guanyu Zhu

2021 ◽  
Vol 37 (5) ◽  
pp. 763-774
Author(s):  
Ernest Ekow Abano

HighlightsMicrowave pretreatment before drying reduced drying time significantly.Microwave-assisted drying increased the effective moisture diffusivity coefficient.Microwave pretreatment before convective hot-air drying improved quality parameters.The Middili et al. (2002) model best fitted the microwave-assisted drying of sugarloaf pineapples.Abstract. This study’s objective was to provide the optimum drying conditions to produce quality dried sugarloaf pineapples using microwave pretreatments before the conventional hot air drying. For this, the effect of microwave power (385 to 697 W), microwave time (2 to 4 min), and air temperature (50°C to 70°C) on the drying kinetics and quality of sugarloaf pineapple were evaluated using the Box Behnken response surface methodology. To reach a 17.44±0.09% kg/kg dry matter moisture content, we found the optimum drying conditions for sugarloaf pineapples to be 697 W microwave power for 2.26 min before convective hot air drying at a temperature of 64.75°C. The predicted drying time, ascorbic acid content, and browning index were 13.68 h, 20.89 mg/100 g, and 0.099 Abs unit at this optimum condition, respectively. The pineapple slices’ effective moisture removal rate pretreated with microwave before drying was higher than the control and was between 6.42 × 10-10 m2/s and 11.82 × 10-10 m2/s while ones without a microwave were between 3.54 × 10-10 m2/s and 8.78 × 10-10 m2/s for drying at air temperature between 50°C and 70°C. It was discovered that the Midilli et al. (2002) model was the most appropriate thin layer model for microwave-assisted drying of sugarloaf pineapples. The pineapple slices’ drying rate potential generally increased with microwave power and pretreatments time but not the corresponding increase in the air temperature. Drying time for microwave-assisted drying was in the range of 11 to 20 h, while the ones without microwaves were between 18 and 24 h. Therefore, microwaves should be considered a pretreatment step to the industrial production of sugarloaf pineapple to reduce drying time and produce better quality products. Keywords: Drying, Hot air, Microwave, Moisture diffusivity, Sugarloaf pineapple.


Sign in / Sign up

Export Citation Format

Share Document