scholarly journals Hydrothermal fabrication and characterization of novel CeO2/PbWO4 nanocomposite for enhanced visible-light photocatalytic performance

2021 ◽  
Vol 11 (6) ◽  
Author(s):  
S. Selvi ◽  
Ranjith Rajendran ◽  
N. Jayamani
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Visible Region ◽  
Hydrothermal Preparation ◽  
Electron Hole ◽  
Photoexcited Electron ◽  
Visible Light Driven ◽  
Fabrication And Characterization ◽  
Visible Light Photocatalytic

AbstractIn this revision, a series of novel visible-light-driven (VLD) CeO2/PbWO4 nanocomposites (NCs) were effectively fabricated by facile hydrothermal preparation way. The UV–Vis absorption spectra exposed that CeO2 NPs prolonged the adsorption edge of the CeO2/PbWO4 composite to the extensive visible region, which allied to decreases of the bandgap. As-prepared CeO2/PbWO4 NCs revealed superior photocatalytic action under visible-light and could degrade the Methylene Blue (MB) dye solution in 140 min. The photodegradation efficacy of CeO2/PbWO4 NCs was improved catalytic activity, which is around 1.45 and 2.7 times that of CeO2 and PbWO4 nanoparticles (NPs) individually. Besides, the CeO2/PbWO4 catalysts display notable stability and reusability performance in four succeeding cycles. The development in the photocatalytic enactment of combined CeO2/PbWO4 nanocomposite could be recognized not only to the sturdy visible-light absorption responses and separating the photoexcited electron–hole pairs. Also, the plausibly systematic illumination of charge transference and exploitation of reactive species for superior photocatalytic action in visible-light have been discussed. It is projected that the CeO2/PbWO4 NCs could be used as effective photocatalysts for promising applications for environmental wastewater refinement.

scholarly journals Hydrothermal Preparation of Visible-Light-Driven N-Br-CodopedTiO2Photocatalysts

2008 ◽  
Vol 2008 ◽  
pp. 1-7 ◽  
Author(s):  
Yonggang Sheng ◽  
Yao Xu ◽  
Dong Jiang ◽  
Liping Liang ◽  
Dong Wu ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Synergetic Effect ◽  
Visible Region ◽  
Charge Compensation ◽  
Direct Reaction ◽  
Hydrothermal Preparation ◽  
Electron Hole ◽  
Visible Light Driven ◽  
Hole Recombination

Using a facile hydrothermal method, N-Br-codopedTiO2photocatalyst that had intense absorption in visible region was prepared at low temperature (100°C), through a direct reaction between nanocrystalline anataseTiO2solution and cetyltrimethylammonium bromide (CTAB). The results of X-ray photoelectron spectroscopy (XPS) showed the existence of N-Ti-N, O-Ti-N-R,Ti3+(attribute to the doped Br atoms by charge compensation), andTiOxNyspecies, indicating the successful codoping of N and Br atoms, which were substituted for lattice oxygen without any influence on the crystalline phase ofTiO2. In contrast to the N-doped sample, the N-Br-codopedTiO2photocatalyst could more readily photodegrade methylene blue (MB) under visible-light irradiation. The visible-light catalytic activity of thus-prepared photocatalyst resulted from the synergetic effect of the doped nitrogen and bromine, which not only gave high absorbance in the visible-light range, but also reduced electron-hole recombination rate.

scholarly journals Construction of Ag3PO4/SnO2 Heterojunction on Carbon Cloth with Enhanced Visible Light Photocatalytic Degradation

2020 ◽  
Vol 10 (9) ◽  
pp. 3238
Author(s):  
Min Liu ◽  
Guangxin Wang ◽  
Panpan Xu ◽  
Yanfeng Zhu ◽  
Wuhui Li
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Separation Efficiency ◽  
Photogenerated Electron ◽  
Carbon Cloth ◽  
Electron Hole ◽  
Step Process ◽  
Photogenerated Electrons ◽  
Rapid Transfer ◽  
Visible Light Photocatalytic

In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for the degradation of Rhodamine B (RhB) and methylene blue (MB), under visible light irradiation. The calculated k values for the degradation of RhB and MB over Ag3PO4/SnO2/CC are 0.04716 min−1 and 0.04916 min−1, which are higher than those calculated for the reactions over Ag3PO4/SnO2, Ag3PO4/CC and SnO2/CC, respectively. The enhanced photocatalytic activity could mainly be attributed to the improved separation efficiency of photogenerated electron-hole pairs, after the formation of the Ag3PO4/SnO2/CC heterojunction. Moreover, carbon cloth with a large specific surface area and excellent conductivity was used as the substrate, which helped to increase the contact area of dye solution with photocatalysts and the rapid transfer of photogenerated electrons. Notably, when compared with the powder catalyst, the catalysts supported on carbon cloth are easier to quickly recycle from the pollutant solution, thereby reducing the probability of recontamination.

scholarly journals Enhanced Visible-Light Photocatalytic Performance of SAPO-5-Based g-C3N4 Composite for Rhodamine B (RhB) Degradation

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3948
Author(s):  
Lingfang Qiu ◽  
Zhiwei Zhou ◽  
Mengfan Ma ◽  
Ping Li ◽  
Jinyong Lu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Redox Reactions ◽  
Photocatalytic Performance ◽  
Dye Degradation ◽  
Thermal Polymerization ◽  
Light Illumination ◽  
Electron Hole ◽  
Visible Light Illumination ◽  
Visible Light Photocatalytic

Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4 composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4 is evaluated by degrading RhB (30 mg/L) under visible light illumination (λ > 420 nm). The effects of SAPO-5 incorporation proportion and initial RhB concentration on the photocatalytic performance have been discussed in detail. The optimized SAPO-5/g-C3N4 composite shows promising degradation efficiency which is 40.6% higher than that of pure g-C3N4. The degradation rate improves from 0.007 min−1 to 0.022 min−1, which is a comparable photocatalytic performance compared with other g-C3N4-based heterojunctions for dye degradation. The migration of photo-induced electrons from g-C3N4 to the Al site of SAPO-5 should promote the photo-induced electron-hole pairs separation rate of g-C3N4 efficiently. Furthermore, the redox reactions for RhB degradation occur on the photo-induced holes in the g-C3N4 and Al sites in SAPO-5, respectively. This achievement not only improves the photocatalytic activity of g-C3N4 efficiently, but also broadens the application of SAPOs in the photocatalytic field.

scholarly journals Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2206
Author(s):  
Gaoqian Yuan ◽  
Gen Zhang ◽  
Kezhuo Li ◽  
Faliang Li ◽  
Yunbo Cao ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Bimetallic Nanoparticles ◽  
Resonance Effect ◽  
Visible Region ◽  
Photogenerated Electron ◽  
Pt Nanoparticles ◽  
Electron Hole

Loading a noble metal on Bi4Ti3O12 could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi4Ti3O12 composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi4Ti3O12. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag0.7Pt0.3/Bi4Ti3O12 was 0.027 min−1, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi4Ti3O12, Pt/Bi3Ti4O12 and Bi4Ti3O12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag0.7Pt0.3/Bi4Ti3O12 was superior to that of Ag/Bi4Ti3O12 and Pt/Bi3Ti4O12 owing to the synergistic effect between Ag and Pt nanoparticles.

Facile and sustainable synthesis of carbon-doped ZnO nanostructures towards the superior visible light photocatalytic performance

2017 ◽  
Vol 41 (17) ◽  
pp. 9314-9320 ◽  
Author(s):  
Sajid Ali Ansari ◽  
S. G. Ansari ◽  
H. Foaud ◽  
Moo Hwan Cho
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Zno Nanostructures ◽  
Photoelectrochemical Performance ◽  
Carbon Doped ◽  
Visible Light Driven ◽  
Doped Zno ◽  
Visible Light Photocatalytic

Design of carbon doped ZnO nanostructures towards enhanced visible light driven photocatalytic and photoelectrochemical performance.

scholarly journals Construction of H4xK2xSn2−xS4+x/TiO2 nanocomposites with enhanced visible light-driven photocatalytic performance

RSC Advances ◽  
2020 ◽  
Vol 10 (20) ◽  
pp. 11851-11860
Author(s):  
Rongjing Wang ◽  
Yaru Li ◽  
Qianyi Sun ◽  
Kaihua Gao ◽  
Yufu Pan ◽  
...  
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Visible Light Driven ◽  
Visible Light Photocatalytic

The enhanced visible light photocatalytic performance of a newly fabricated nanostructure combined TiO2 with HKTS.

scholarly journals The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2261 ◽  
Author(s):  
Abdul Wafi ◽  
Erzsébet Szabó-Bárdos ◽  
Ottó Horváth ◽  
Mihály Pósfai ◽  
Éva Makó ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Surface Area ◽  
Photocatalytic Performance ◽  
Visible Region ◽  
Bet Surface Area ◽  
Doped Tio2 ◽  
X Ray ◽  
Nitrogen Doped ◽  
Visible Light Driven

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO2 catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol–gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy–energy dispersive X-ray spectroscopy (TEM–EDS), Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10−6 mol g−1, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Sign in / Sign up

Export Citation Format

Share Document