scholarly journals The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2261 ◽  
Author(s):  
Abdul Wafi ◽  
Erzsébet Szabó-Bárdos ◽  
Ottó Horváth ◽  
Mihály Pósfai ◽  
Éva Makó ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Surface Area ◽  
Photocatalytic Performance ◽  
Visible Region ◽  
Bet Surface Area ◽  
Doped Tio2 ◽  
X Ray ◽  
Nitrogen Doped ◽  
Visible Light Driven

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO2 catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol–gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy–energy dispersive X-ray spectroscopy (TEM–EDS), Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10−6 mol g−1, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Preparation and Characterization of Nitrogen Doped TiO2 Nanoparticles as an Effective Catalyst in Photodegradation of Phenol under Visible Light

2014 ◽  
Vol 875-877 ◽  
pp. 28-33 ◽  
Author(s):  
Armineh Hassanvand ◽  
Morteza Sohrabi ◽  
Sayed Javid Royaee ◽  
Morteza Jafarikajour
Keyword(s):  
Visible Light ◽  
Tio2 Nanoparticles ◽  
Surface Area ◽  
Visible Light Irradiation ◽  
Light Irradiation ◽  
Bet Surface Area ◽  
Doped Tio2 ◽  
X Ray ◽  
Nitrogen Doped ◽  
Degussa P25

Nitrogen-doped TiO2 nanoparticles of commercial Degussa P25 have been prepared via a direct impregnation reaction using ammonium hydroxide solution as nitrogen source. The Samples were characterized by X-ray diffraction (XRD), BET surface area BJH pore charecterization and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDX). The results demonstrated that the nitrogen-doped TiO2 nanoparticles had a crystallite size 70.8 nm and a specific surface area of 6.4 m2/g with average pore diameter of 23.3 nm consisting mainly of titanium and oxygen. The photocatalyst activity was determined by degradation of phenol in an impinging stream reactor under visible light irradiation (λ> 400 nm). N-TiO2 catalyst exhibited higher photocatalytic activity in comparison with Degussa P25 under visible light irradiation.

scholarly journals Magnetically Recyclable Wool Keratin Modified Magnetite Powders for Efficient Removal of Cu2+ Ions from Aqueous Solutions

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1068
Author(s):  
Xinyue Zhang ◽  
Yani Guo ◽  
Wenjun Li ◽  
Jinyuan Zhang ◽  
Hailiang Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Chemical Compositions ◽  
Ion Adsorption ◽  
X Ray ◽  
Wool Keratin

The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe3O4) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu2+ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer–Emmett–Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu2+ ion concentration, and the pH value of solution on the adsorption capacity of Cu2+ ions by the powders were examined. The experimental results indicated that the Cu2+ ion adsorption performance of the wool keratin modified Fe3O4 powders exhibited much better than that of the chitosan modified ones with a maximum Cu2+ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO4; pH 5; temperature 293 K). The high adsorption capacity towards Cu2+ ions on the wool keratin modified Fe3O4 powders was primarily because of the strong surface complexation of –COOH and –NH2 functional groups of wool keratins with Cu2+ ions. The Cu2+ ion adsorption process on the wool keratin modified Fe3O4 powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu2+ ion removal, the wool keratin modified Fe3O4 powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H2SO4 eluting. The wool keratin modified Fe3O4 powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

scholarly journals Palladium nanoparticles anchored to anatase TiO2 for enhanced surface plasmon resonance-stimulated, visible-light-driven photocatalytic activity

2015 ◽  
Vol 6 ◽  
pp. 428-437 ◽  
Author(s):  
Kah Hon Leong ◽  
Hong Ye Chu ◽  
Shaliza Ibrahim ◽  
Pichiah Saravanan
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Surface Plasmon Resonance ◽  
Visible Light ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Palladium Nanoparticles ◽  
Noble Metals ◽  
Visible Region ◽  
Bet Surface Area

Freely assembled palladium nanoparticles (Pd NPs) on titania (TiO2) nano photocatalysts were successfully synthesized through a photodeposition method using natural sunlight. This synthesized heterogeneous photocatalyst (Pd/TiO2) was characterized through field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), BET surface area, UV–vis diffuse reflectance spectra (UV-DRS), Raman and photoluminescence (PL) analyses. The simple and smart synthesis anchored well the deposition with controlled Pd NPs size ranging between 17 and 29 nm onto the surface of TiO2. Thus, it gives the characteristic for Pd NPs to absorb light in the visible region obtained through localized surface plasmon resonance (LSPRs). Apparently, the photocatalytic activity of the prepared photocatalysts was evaluated by degrading the endocrine disrupting compound (EDC) amoxicillin (AMX) excited under an artificial visible light source. In the preliminary run, almost complete degradation (97.5%) was achieved in 5 h with 0.5 wt % Pd loading and the degradation followed pseudo-first-order kinetics. The reusability trend proved the photostability of the prepared photocatalysts. Hence, the study provides a new insight about the modification of TiO2 with noble metals in order to enhance the absorption in the visible-light region for superior photocatalytic performance.

Fabrication of nitrogen-doped TiO2 monolith with well-defined macroporous and bicrystalline framework and its photocatalytic performance under visible light

2014 ◽  
Vol 34 (3) ◽  
pp. 809-816 ◽  
Author(s):  
Olim Ruzimuradov ◽  
Suvankul Nurmanov ◽  
Mirabbos Hojamberdiev ◽  
Ravi Mohan Prasad ◽  
Aleksander Gurlo ◽  
...  
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Doped Tio2 ◽  
Nitrogen Doped

scholarly journals Graphene oxide and Ag engulfed TiO2 nanotube arrays for enhanced electron mobility and visible-light-driven photocatalytic performance

2014 ◽  
Vol 2 (15) ◽  
pp. 5315-5322 ◽  
Author(s):  
Lan Ching Sim ◽  
Kah Hon Leong ◽  
Shaliza Ibrahim ◽  
Pichiah Saravanan
Keyword(s):  
Photocatalytic Activity ◽  
Graphene Oxide ◽  
Visible Light ◽  
Electron Mobility ◽  
Photocatalytic Performance ◽  
Visible Region ◽  
Tio2 Nanotube Arrays ◽  
Nanotube Arrays ◽  
Ternary Composite ◽  
Visible Light Driven

GO–Ag–TNTs, a ternary composite was synthesized. Both Ag and GO well contributed to enhance the photocatalytic activity in the visible region.

scholarly journals Synthesis and Characterisation of Mesoporous TiO2 Nanoparticles by Novel Surfactant Assisted Sol-gel Method for the Degradation of Organic Compounds

2018 ◽  
Vol 63 (1) ◽  
pp. 85-95 ◽  
Author(s):  
Harish Phattepur ◽  
Gowrishankar Bychapur Siddaiah ◽  
Nagaraju Ganganagappa
Keyword(s):  
Electron Microscopy ◽  
Tio2 Nanoparticles ◽  
Surface Area ◽  
Sol Gel ◽  
Bet Surface Area ◽  
X Ray Diffraction ◽  
Tio2 Nps ◽  
Gel Method ◽  
X Ray ◽  
Surfactant Assisted

A sol-gel method was employed to synthesise pure titanium dioxide (TiO2) and surfactant assisted TiO2 nanoparticles (NPs). The effect of novel surfactant viz., Lauryl lactyl lactate on photocatalytic properties of TiO2 was studied. TiO2 NPs were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-Vis Diffuse Reflectance spectra (DRS), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), Thermo gravimetric analysis (TGA), and Brunauer – Emmet - Teller (BET) surface area. Anatase phase of TiO2 was confirmed by X-Ray diffraction pattern and the crystallite size was between 9–19 nm. Addition of surfactant improved the BET surface area, surface defects, while the agglomeration of particles was reduced. DRS results revealed that the addition of surfactant to TiO2 sol induced a red shift of the absorption edge which resulted in the reduction of band gap from 3.23 to 3.21 eV. These physicochemical properties of TiO2 NPs were correlated with photocatalytic degradation of phenol. About 92% of phenol degradation was observed for surfactant assisted TiO2 NPs (SA-TiO2). Salicylic acid and caffeine were also degraded using SA-TiO2 NPs.

scholarly journals Synthesis of BiSI/Ag2CO3 Composite Material for Photocatalytic Degradation of Rhodamine B under Visible Light

2021 ◽  
Author(s):  
Rui Zhang ◽  
ziyin chen ◽  
Chen Zhao ◽  
Kunlin Zeng ◽  
Lu Cai ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Electrochemical Impedance ◽  
Diffuse Reflectance Spectroscopy ◽  
Mass Ratio ◽  
X Ray ◽  
Visible Light Driven

Abstract A novel binary BiSI/Ag2CO3 photocatalyst with excellent visible light-driven photocatalytic performance was prepared. The products were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) and electrochemical impedance spectroscopy (EIS). The photocatalytic activity of the samples were evaluated by photocatalytic degradation of rhodamine B(RhB) under the irradiation of visible light. The results showed that the BiSI improves the photocatalytic activity of BiSI/Ag2CO3. Moreover, when the mass ratio of BiSI in BiSI/Ag2CO3 composites was 40%, the as-prepared BiSI/Ag2CO3 composite exhibited the best photocatalytic activity for degrading RhB. Finally, the possible mechanism for photodegradation over the BiSI/Ag2CO3 composites is also proposed.

Sign in / Sign up

Export Citation Format

Share Document