scholarly journals Preparation and Photocatalytic Performance for Degradation of Rhodamine B of AgPt/Bi4Ti3O12 Composites

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2206
Author(s):  
Gaoqian Yuan ◽  
Gen Zhang ◽  
Kezhuo Li ◽  
Faliang Li ◽  
Yunbo Cao ◽  
...  
Keyword(s):  
Visible Light ◽  
Noble Metal ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Bimetallic Nanoparticles ◽  
Resonance Effect ◽  
Visible Region ◽  
Photogenerated Electron ◽  
Pt Nanoparticles ◽  
Electron Hole

Loading a noble metal on Bi4Ti3O12 could enable the formation of the Schottky barrier at the interface between the former and the latter, which causes electrons to be trapped and inhibits the recombination of photoelectrons and photoholes. In this paper, AgPt/Bi4Ti3O12 composite photocatalysts were prepared using the photoreduction method, and the effects of the type and content of noble metal on the photocatalytic performance of the catalysts were investigated. The photocatalytic degradation of rhodamine B (RhB) showed that the loading of AgPt bimetallic nanoparticles significantly improved the catalytic performance of Bi4Ti3O12. When 0.10 wt% noble metal was loaded, the degradation rate for RhB of Ag0.7Pt0.3/Bi4Ti3O12 was 0.027 min−1, which was respectively about 2, 1.7 and 3.7 times as that of Ag/Bi4Ti3O12, Pt/Bi3Ti4O12 and Bi4Ti3O12. The reasons may be attributed as follows: (i) the utilization of visible light was enhanced due to the surface plasmon resonance effect of Ag and Pt in the visible region; (ii) Ag nanoparticles mainly acted as electron acceptors to restrain the recombination of photogenerated electron-hole pairs under visible light irradiation; and (iii) Pt nanoparticles acted as electron cocatalysts to further suppress the recombination of photogenerated electron-hole pairs. The photocatalytic performance of Ag0.7Pt0.3/Bi4Ti3O12 was superior to that of Ag/Bi4Ti3O12 and Pt/Bi3Ti4O12 owing to the synergistic effect between Ag and Pt nanoparticles.

scholarly journals Construction of Ag3PO4/SnO2 Heterojunction on Carbon Cloth with Enhanced Visible Light Photocatalytic Degradation

2020 ◽  
Vol 10 (9) ◽  
pp. 3238
Author(s):  
Min Liu ◽  
Guangxin Wang ◽  
Panpan Xu ◽  
Yanfeng Zhu ◽  
Wuhui Li
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Separation Efficiency ◽  
Photogenerated Electron ◽  
Carbon Cloth ◽  
Electron Hole ◽  
Step Process ◽  
Photogenerated Electrons ◽  
Rapid Transfer ◽  
Visible Light Photocatalytic

In this study, the Ag3PO4/SnO2 heterojunction on carbon cloth (Ag3PO4/SnO2/CC) was successfully fabricated via a facile two-step process. The results showed that the Ag3PO4/SnO2/CC heterojunction exhibited a remarkable photocatalytic performance for the degradation of Rhodamine B (RhB) and methylene blue (MB), under visible light irradiation. The calculated k values for the degradation of RhB and MB over Ag3PO4/SnO2/CC are 0.04716 min−1 and 0.04916 min−1, which are higher than those calculated for the reactions over Ag3PO4/SnO2, Ag3PO4/CC and SnO2/CC, respectively. The enhanced photocatalytic activity could mainly be attributed to the improved separation efficiency of photogenerated electron-hole pairs, after the formation of the Ag3PO4/SnO2/CC heterojunction. Moreover, carbon cloth with a large specific surface area and excellent conductivity was used as the substrate, which helped to increase the contact area of dye solution with photocatalysts and the rapid transfer of photogenerated electrons. Notably, when compared with the powder catalyst, the catalysts supported on carbon cloth are easier to quickly recycle from the pollutant solution, thereby reducing the probability of recontamination.

scholarly journals Synthesis and characterization of Z-scheme heterostructure CoWO4/g-C3N4 as a visible-light photocatalyst for removal of organic pollutant

2021 ◽  
Vol 10 (2) ◽  
pp. 59-63
Author(s):  
Hai Pham Viet ◽  
Anh Dao Thi Ngoc ◽  
Viet Nguyen Minh ◽  
Ha Tran Thi Viet ◽  
Dang Do Van ◽  
...  
Keyword(s):  
Visible Light ◽  
Rhodamine B ◽  
High Performance ◽  
Organic Pollutant ◽  
Photogenerated Electron ◽  
Morphological Properties ◽  
Electron Hole ◽  
Visible Light Photocatalyst ◽  
Photocatalytic Activities

In this study, direct Z–scheme heterostructure CoWO4/g-C3N4 was synthesized by a facile hydrothermal method. The structural, morphological properties of the prepared samples were characterised by XRD, SEM, UV–Vis and PL measurements. The as-obtained heterostructure CoWO4/g-C3N4 exhibited enhanced photocatalytic activities toward the degradation of Rhodamine B under visible light irradiation with 92% Rhodamine B removal after 80 minutes irritation, which exceeded pristine g-C3N4 and CoWO4. The enhanced photocatalytic performance ascribed to interfacial contact between g-C3N4 and CoWO4, thus further inhibiting the recombination of photogenerated electron/hole pairs. It is anticipated that the construction of Z–scheme heterostructure CoWO4/g-C3N4 is an effective strategy to develop high-performance photocatalysts for the degradation of organic pollutants in water.

NiFe-LDH@ZnO@NF composite for photo-degradation of Rhodamine B dye

MRS Advances ◽  
2019 ◽  
Vol 4 (33-34) ◽  
pp. 1887-1893
Author(s):  
Jun Wu ◽  
Yonghui Gong ◽  
Qiang Fu ◽  
Chunxu Pan
Keyword(s):  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Nickel Foam ◽  
Photogenerated Electron ◽  
Chemical Compositions ◽  
Photocatalytic Efficiency ◽  
Electron Hole ◽  
Photo Degradation ◽  
Potential Applications ◽  
Rhodamine B Dye

ABSTRACTIn this paper, a novel NiFe-LDH@ZnO composite was prepared by using a facile two-step process upon nickel foam (NF) substrate. The morphologies and chemical compositions of the samples were characterized by SEM, EDS, XRD and XPS. Photocatalytic degradation of Rhodamine B dye was tested with the samples NiFe-LDH@ZnO@NF, ZnO@NF and NiFe-LDH under the same conditions. The experimental results revealed that the NiFe-LDH@ZnO@NF composite exhibited excellent photocatalytic performance, i.e., 1.4 and 2.5 times higher than that of pure ZnO and NiFe-LDH, respectively. The reason was that the NiFe-LDH@ZnO@NF composite provided a possibility to effectively inhibit the recombination of the photogenerated electron-hole pairs, and therefore enhanced the photocatalytic efficiency. This composite is expected to have potential applications in wastewater treatment field.

scholarly journals Synthesis and characterization of black TiO2/graphene composites with enhanced photocatalysis

2020 ◽  
Author(s):  
Zhaoqing Li ◽  
Zhufeng Liu ◽  
Xiao Yang ◽  
Peng Chen ◽  
Lei Yang ◽  
...  
Keyword(s):  
Visible Light ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
Photogenerated Electron ◽  
Catalytic Performance ◽  
Attractive Potential ◽  
Electron Hole ◽  
Hole Recombination

Abstract According to the composite design, a series of black TiO2/graphene composites were synthesized to improve its photocatalytic activity. TiO2 is generated in situ on the surface of graphene by a facile sol-gel method. The combination of graphene and TiO2 was beneficial for eliminating the opportunity of photogenerated electron-hole recombination due to the excellent conductivity of graphene. In the subsequent hydrogenation process, the self-doping Ti3+ was introduced accompanied by the crystallization of amorphous TiO2. The narrowed bandgap caused by self-doping Ti3+ enhanced the visible light absorption and make the composites appear black. Both of them improved the photocatalytic performance of the synthesized black TiO2/graphene composites. The band structure of the composite was analyzed by valence band XPS, revealing the reason for the high visible light catalytic performance of the composite. The results proved that the black TiO2/graphene composites synthesized show attractive potential for applications in environmental and energy issues.

Surface oxygen vacancy and defect engineering of WO3 for improved visible light photocatalytic performance

2018 ◽  
Vol 8 (17) ◽  
pp. 4399-4406 ◽  
Author(s):  
Qi Liu ◽  
Fengjiao Wang ◽  
Huaxiang Lin ◽  
Yanyu Xie ◽  
Na Tong ◽  
...  
Keyword(s):  
Oxygen Vacancy ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Photogenerated Electron ◽  
Vacancy Defect ◽  
Surface Oxygen ◽  
Defect Engineering ◽  
Electron Hole ◽  
Surface Oxygen Vacancy ◽  
Visible Light Photocatalytic

Compared to the pristine WO3, the oxygen vacancy defect levels of the sub-stoichiometric WO3−X narrow the bandgap and promote the separation of photogenerated electron–hole pairs.

Synthesis of Cu2(OH)PO4 superstructures with NIR-laser enhanced photocatalytic activity

2020 ◽  
Vol 13 (03) ◽  
pp. 2050015 ◽  
Author(s):  
Lu Cheng ◽  
Nuo Yu ◽  
Yan Zhang ◽  
Zhun Shi ◽  
Haifeng Wang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Near Infrared ◽  
Visible Region ◽  
Photogenerated Electron ◽  
Photothermal Effect ◽  
Hydrothermal Route ◽  
Electron Hole ◽  
Light Group ◽  
Nir Laser

The development of photocatalysts with wide UV-Vis-near-infrared (NIR) photoabsorption has received tremendous interest for utilizing sunlight efficiently. In this work, Cu2(OH)PO4 superstructures are prepared by a simple hydrothermal route, and they have strong bandgap absorption in UV-Visible region and a distinctive plasmon resonance absorption in NIR region. Under the synergetic illumination of visible light and 980[Formula: see text]nm laser (3.0[Formula: see text]W[Formula: see text]cm[Formula: see text]), Cu2(OH)PO4 superstructures can degrade 89.2% MB with the elevated temperature ([Formula: see text]51∘C) of solution, which is higher than that from visible light group (50.0%), laser group (16.4%), and visible-light/exterior-heating group (62.5%, same temperature at [Formula: see text]51.0∘C). These facts reveal that Cu2(OH)PO4 superstructures exhibit NIR-laser enhanced photocatalytic activity, which not only comes from the photothermal effect-induced temperature elevation, but also mainly results from the increased production of photogenerated electron-hole pairs by NIR-laser. Therefore, Cu2(OH)PO4 superstructures can act as efficient photocatalyst with NIR-laser enhanced photocatalytic activity.

Synthesis and High Visible Light Photocatalytic Activity of Ternary Brookite-g-C3N4-BiOBr Composite

NANO ◽  
2020 ◽  
Vol 15 (04) ◽  
pp. 2050045
Author(s):  
Ning Liu ◽  
Huidong Xie ◽  
Jie Li ◽  
Yajuan Zhao ◽  
Na Wang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Separation Efficiency ◽  
Photogenerated Electron ◽  
Photocurrent Density ◽  
Electron Hole ◽  
Degradation Ratio ◽  
Loading Amount ◽  
Visible Light Photocatalytic

Brookite TiO2 was synthesized by a hydrothermal method, g-C3N4 was prepared by a pyrolytic method, brookite/g-C3N4 composites were prepared by a calcining method, and brookite/g-C3N4/BiOBr ternary composites were prepared by loading BiOBr on the surface of brookite/g-C3N4. XRD and XPS analysis of the composites confirmed the formation of brookite TiO2/g-C3N4/BiOBr. SEM and TEM results confirmed the as-prepared composites were nanosized. The optimum loading amount of BiOBr was 30%. The photocatalytic results showed that the brookite/g-C3N4/30%BiOBr composites degraded rhodamine B completely under visible light irradiation. The degradation ratio of brookite/g-C3N4/30%BiOBr toward rhodamine B was nearly 100% for 2[Formula: see text]h, which was much higher than that of brookite TiO2 and brookite/g-C3N4 catalysts. The reason for the improvement of photocatalytic activity might be because the composites promoted the formation of superoxide radicals and the separation efficiency of photogenerated electron-hole pairs. The photocurrent density of the brookite/g-C3N4/30%BiOBr was about 10 times higher than that of pure brookite. In addition, the brookite/g-C3N4/BiOBr showed a good repeatablity of photocatalysis.

Preparation and Photocatalytic Property of WO3-TiO2 /Ti Ceramic Film via Anodic Oxidation Treatment

2008 ◽  
Vol 368-372 ◽  
pp. 1500-1502 ◽  
Author(s):  
Yan Li Jiang ◽  
Hui Ling Liu ◽  
Zhao Hua Jiang ◽  
Zhong Ping Yao
Keyword(s):  
Visible Light ◽  
Anodic Oxidation ◽  
Rhodamine B ◽  
Recombination Rate ◽  
Visible Region ◽  
Photocatalytic Property ◽  
Electron Hole ◽  
Ceramic Film ◽  
High Efficient ◽  
Anodic Oxidation Treatment

The high efficient WO3-TiO2/Ti ceramic film was prepared on the surface of titanium by the approach of anodic oxidation in order to make the absorbable spectrum of catalyst spread to the visible region and restrain the high recombination rate of electron-hole pairs during photoreaction. The surface morphology and the distribution of elements were studied with scanning electron microscopy and energy dispersive spectroscopy. The phase composition of the films was investigated with XRD. The results showed that the main components in the coating were WO3, rutile TiO2 and anatase TiO2. The compound WO3-TiO2/Ti ceramic film enlarged the range of the reacting visible light and increased the absorbing intensity. The rhodamine B was successfully photodegraded under visible light irradiation by WO3-TiO2/Ti catalyst films. It was found that the highest degradation rate of rhodamine B was achieved through an optimal W dosage of 4.2 %(wt %) in WO3-TiO2/Ti ceramic film. It was also confirmed that the recombination rate of electron-hole pairs in WO3-TiO2/Ti ceramic film declined due to the existence of WO3 in TiO2/Ti ceramic film.

scholarly journals Phthalocyanine-sensitized hollow ZnO spheres as an efficient visiblie-light photocatalyst for water treatment

2020 ◽  
Vol 194 ◽  
pp. 04057
Author(s):  
Cong Liu ◽  
Qian Duan
Keyword(s):  
Photocatalytic Activity ◽  
Water Treatment ◽  
Visible Light ◽  
Rhodamine B ◽  
Photocatalytic Performance ◽  
Solvothermal Method ◽  
Electron Hole ◽  
Hierarchical Nanostructure ◽  
Facile Solvothermal Method

A novel phthalocyanine-sensitized hollow ZnO spheres as an efficient visiblie-light photocatalyst had been prepared successfully. Firstly, a unique hollow ZnO microsphere had been prepared by a facile solvothermal method followed by calcination. Secondly, zinc-tetracarboxyl-phthalocyanine (Pc) impregnated onto the surface of hollow ZnO microsphere. The obtained photocatalyst Pc/ZnO was characterized by XRD, SEM and EDS. The hollow Pc/ZnO hierarchical nanostructure improved the electron-hole separation more effectively and Pc loaded on the surface of ZnO microsphere to enhance photocatalytic activity under visible light. In our photocatalytic experiments, the hollow Pc/ZnO microsphere showed excellent photocatalytic performance under visible light for the removal of Rhodamine B (RhB). As a result, our work provided an effective and green photocatalyst for water treatment.

scholarly journals A metal-free 3C-SiC/g-C3N4 composite with enhanced visible light photocatalytic activity

RSC Advances ◽  
2017 ◽  
Vol 7 (63) ◽  
pp. 40028-40033 ◽  
Author(s):  
Hao Xu ◽  
Zhixing Gan ◽  
Weiping Zhou ◽  
Zuoming Ding ◽  
Xiaowei Zhang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Light Absorption ◽  
Carbon Nitride ◽  
Photocatalytic Performance ◽  
Photogenerated Electron ◽  
Electron Hole ◽  
Visible Light Absorption ◽  
Metal Free ◽  
Visible Light Photocatalytic

Insufficient visible light absorption and fast recombination of the photogenerated electron–hole pairs have seriously hampered the photocatalytic performance of graphitic carbon nitride (g-C3N4) up to now.

Sign in / Sign up

Export Citation Format

Share Document