Numerical nonlinear modeling and simulations of high strength reinforced concrete beams using ANSYS

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Pandimani ◽  
Markandeya Raju Ponnada ◽  
Yesuratnam Geddada
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Nonlinear Modeling ◽  
High Strength ◽  
Reinforced Concrete Beams ◽  
Modeling And Simulations

Effect of cracking localization on the structural ductility of normal strength and high strength reinforced concrete beams with steel fibers

2019 ◽  
Vol 10 (4) ◽  
pp. 457-469 ◽  
Author(s):  
Avraham N Dancygier ◽  
Yuri S Karinski
Keyword(s):  
Reinforced Concrete ◽  
Transition Point ◽  
Concrete Beams ◽  
High Strength ◽  
Reinforcement Ratio ◽  
Steel Fibers ◽  
Reinforced Concrete Beams ◽  
Flexural Ductility ◽  
Ductility Ratio ◽  
The Impact

This article presents a study of cracking localization in normal and high strength concrete beams that include steel fibers and the influence of this localization on their structural ductility. It is shown that for a given fiber type and content, as the reinforcement ratio ρ decreases, the cracking localization level increases. The effect of ρ on the level of cracking localization is more pronounced for low amounts of conventional reinforcement. This range of conventional reinforcement ratio is typical of slabs and especially for the commonly thicker protective slabs. Examination of the effect of the reinforcement ratio on the flexural ductility shows that there exists a transition point below which the ductility ratio decreases with  ρ. This transition point is well above the minimum reinforcement ratio, which is required in design codes for plain reinforced concrete elements. Empirical analysis of the relation between cracking localization and ductility ratio shows that up to the same transition point, as cracking localization increases, the flexural ductility decreases. Findings of this study show that the positive effect of adding fibers on enhancing the impact resistance of slabs and beams is conflicted by their negative influence on reducing the structural ductility for low reinforcement ratios, which are typical of protective slabs.

Calculation of Flexural Capacity of High-Strength Reinforced Concrete Beams Strengthened with FRP

2011 ◽  
Vol 71-78 ◽  
pp. 815-817 ◽  
Author(s):  
Jiong Feng Liang ◽  
Ze Ping Yang ◽  
Zhi Ming Qiu
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Engineering Application ◽  
High Strength ◽  
Correlation Equation ◽  
Reinforced Concrete Beams ◽  
Flexural Capacity ◽  
Different Types ◽  
Fiber Reinforce ◽  
Good Agreement

The mechanical properties of high-strength reinforced concrete beams strengthened with FRP ( fiber reinforce polymer) are further investigated theoretically including it s failure mechanism and loadability,based on earlier theoretical works on RC beams. And the correlation equation of flexural capacity on the cross section of high-strength reinforced concrete beams strengthened with FRP is deduced according to different types of failure.The correlation equation is shown to be in good agreement with the experimental results, which can be referred to engineering application.

Sign in / Sign up

Export Citation Format

Share Document