Design and analysis of a hollow triangular piezoelectric cantilever beam harvester for vibration energy collection

2019 ◽  
Vol 12 (3) ◽  
pp. 259-268 ◽  
Author(s):  
Linbing Wang ◽  
Xinlong Tong ◽  
Hailu Yang ◽  
Ya Wei ◽  
Yinghao Miao
Keyword(s):  
Cantilever Beam ◽  
Vibration Energy ◽  
Piezoelectric Cantilever

A MEMS Piezoelectric Cantilever Beam Array for Vibration Energy Harvesting

2013 ◽  
Vol 562-565 ◽  
pp. 1052-1057 ◽  
Author(s):  
Xing Qiang Zhao ◽  
Zhi Yu Wen ◽  
Li Cheng Deng ◽  
Guo Xi Luo ◽  
Zheng Guo Shang ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Cantilever Beam ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Cmos Process ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Beam Array ◽  
Piezoelectric Cantilever

A micro piezoelectric cantilever beam array is designed for vibration energy harvesting. A single degree of freedom analytical model is developed to predict the properties of the device and is verified by finite element method. The piezoelectric material Aluminum Nitride was chosen for the compatibility with the CMOS process. The devices consisting of 5 piezoelectric cantilever beams and one proof mass were fabricated using micromachining technology. The resonance frequency, voltage and power were tested at excitation acceleration of 5.0 g. The maximum output power of the device is 9.13 μW at the resonance frequency of 1315 Hz when piezoelectric beams are connected in parallel.

Modeling and Analysis of Piezoelectric Bimorph Cantilever for Vibration Energy Harvesting

2012 ◽  
Vol 610-613 ◽  
pp. 2583-2588
Author(s):  
Jun Jie Gong ◽  
Ying Ying Xu ◽  
Zhi Lin Ruan
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Electromechanical Coupling ◽  
Theory Of Elasticity ◽  
Vibration Energy ◽  
Piezoelectric Bimorph ◽  
Vibration Energy Harvesting ◽  
Output Displacement ◽  
Fea Model ◽  
Piezoelectric Cantilever

The vibration energy can be converted to electrical energy directly and efficiently using piezoelectric cantilever beam based on piezoelectric effect. Since its structure is simple and its working process is unpoisonous to the environment, the piezoelectric cantilever beam can be used in various fields comprehensively. The present paper perform an analysis on the vibration energy harvesting problem of piezoelectric bimorph cantilever beam. The piezoelectric cantilever model has been formulated using the theory of elasticity mechanics and piezoelectric theory. A prototype of piezoelectric power generator is set up to do vibration test, and the electromechanical coupling FEA model under vibration load is built to simulate its output displacement, stress and voltage. The present numerical results of piezoelectric bimorph cantilever coincide well with our related experimental results, which shows the validity of the present FEA model and the relate results.

scholarly journals Experiment Investigation of Bistable Vibration Energy Harvesting with Random Wave Environment

2021 ◽  
Vol 11 (9) ◽  
pp. 3868
Author(s):  
Qiong Wu ◽  
Hairui Zhang ◽  
Jie Lian ◽  
Wei Zhao ◽  
Shijie Zhou ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Harvesting ◽  
Cantilever Beam ◽  
Large Scale ◽  
Low Frequency ◽  
Vibration Energy ◽  
Random Wave ◽  
Periodic Signal ◽  
Vibration Energy Harvesting ◽  
Motion Activity

The energy harvested from the renewable energy has been attracting a great potential as a source of electricity for many years; however, several challenges still exist limiting output performance, such as the package and low frequency of the wave. Here, this paper proposed a bistable vibration system for harvesting low-frequency renewable energy, the bistable vibration model consisting of an inverted cantilever beam with a mass block at the tip in a random wave environment and also develop a vibration energy harvesting system with a piezoelectric element attached to the surface of a cantilever beam. The experiment was carried out by simulating the random wave environment using the experimental equipment. The experiment result showed a mass block’s response vibration was indeed changed from a single stable vibration to a bistable oscillation when a random wave signal and a periodic signal were co-excited. It was shown that stochastic resonance phenomena can be activated reliably using the proposed bistable motion system, and, correspondingly, large-scale bistable responses can be generated to realize effective amplitude enlargement after input signals are received. Furthermore, as an important design factor, the influence of periodic excitation signals on the large-scale bistable motion activity was carefully discussed, and a solid foundation was laid for further practical energy harvesting applications.

scholarly journals Theoretical and Experimental Studies on MEMS Variable Cross-Section Cantilever Beam Based Piezoelectric Vibration Energy Harvester

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 772
Author(s):  
Xianming He ◽  
Dongxiao Li ◽  
Hong Zhou ◽  
Xindan Hui ◽  
Xiaojing Mu
Keyword(s):  
Power Density ◽  
Cantilever Beam ◽  
Cross Section ◽  
Energy Harvester ◽  
Variable Cross Section ◽  
Vibration Energy ◽  
Variable Cross ◽  
Vibration Energy Harvester ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

The piezoelectric vibration energy harvester (PVEH) based on the variable cross-section cantilever beam (VCSCB) structure has the advantages of uniform axial strain distribution and high output power density, so it has become a research hotspot of the PVEH. However, its electromechanical model needs to be further studied. In this paper, the bidirectional coupled distributed parameter electromechanical model of the MEMS VCSCB based PVEH is constructed, analytically solved, and verified, which laid an important theoretical foundation for structural design and optimization, performance improvement, and output prediction of the PVEH. Based on the constructed model, the output performances of five kinds of VCSCB based PVEHs with different cross-sectional shapes were compared and analyzed. The results show that the PVEH with the concave quadratic beam shape has the best output due to the uniform surface stress distribution. Additionally, the influence of the main structural parameters of the MEMS trapezoidal cantilever beam (TCB) based PVEH on the output performance of the device is theoretically analyzed. Finally, a prototype of the Aluminum Nitride (AlN) TCB based PVEH is designed and developed. The peak open-circuit voltage and normalized power density of the device can reach 5.64 V and 742 μW/cm3/g2, which is in good agreement with the theoretical model value. The prototype has wide application prospects in the power supply of the wireless sensor network node such as the structural health monitoring system and the Internet of Things.

Sign in / Sign up

Export Citation Format

Share Document