Low energy X-ray calibration sources for proportional counters using radionuclides

1978 ◽  
Vol 155 (3) ◽  
pp. 435-442 ◽  
Author(s):  
Chizuo Mori ◽  
Hiroshi Noguchi ◽  
Nobuhito Ishigure ◽  
Tamaki Watanabe
1986 ◽  
Vol 119 ◽  
pp. 267-268
Author(s):  
D. Maccagni ◽  
L. Chiappetti ◽  
L. Maraschi ◽  
D. Molteni ◽  
M. Morini ◽  
...  

The bright BL Lac object PKS 2155-304 (mv=13; z=0.117) was observed with EXOSAT at five epochs (1983 Oct. 31, Nov. 30, 1984 Nov. 6, 7 and 11), for a total of about 30 hours of exposure time. Here we present data and results obtained with the Low Energy (LE) telescopes, in the band 0.05–2. keV, and with the Medium Energy (ME) argon proportional counters in the range 1.–6. keV.


1976 ◽  
Vol 20 ◽  
pp. 555-563 ◽  
Author(s):  
K. Sipilä ◽  
E. Kiuru

The wall effect present in the gas-filled proportional counters and the low-energy background caused by it are well-known disadvantages. In this paper a method is presented to define the radial position of a single X-ray absorption in ordinary proportional counters. The method utilizes the variation in detector pulse collection times due to the electron diffusion. This variation can be determined with a specially constructed risetime analyzer which effectively forms a dead zone of cylindrical shape inside the detector. The properties and performance of the method are demonstrated. In the experiment performed the signal to background ratio was improved by a factor of twenty.


1997 ◽  
Vol 159 ◽  
pp. 1-19
Author(s):  
H. Kunieda

AbstractAfter 34 years of X-ray astronomical observations, we approach the time when we will be able to explore AGN using line spectroscopy with newly developed technology and methods. In the beginning, X-rays from AGN were observed using proportional counters in a sort of photometric way, allowing us to determine that the continuum is a power law. This result suggested a predominance of non-thermal emission mechanisms in AGN. Rapid variability on time scales as short as 1000 seconds implied a small size for the X-ray emitting region, of order 1014cm, which is 3 orders of magnitude smaller than the optical emission-line regions.The first detection of line emission from AGN was the Fe-K line by the GINGA satellite. The line energy was 6.4 keV and its equivalent width was about 150 eV in Seyfert 1 galaxies. Detection became possible by use of large-area, low-noise proportional counters. The Fe-K line emission is important in X-ray astronomy because iron is rather abundant and this line is isolated in energy from neighboring lines.The Fe-K line profile has been examined with the CCD detectors on board ASCA. Many Seyfert 1 galaxies exhibit a broad-line profile of more than 1 keV width with an asymmetric tail on the low-energy side. This is explained as the fluorescence line from a relativistic accretion disk around a black hole, which is broadened by the Doppler motion and distorted by the strong gravitational field. The CCD detectors also revealed the absorption edges of warm material in the line of sight, which is ionized by the strong emission from AGN.In the next decade, new spectrometers will be launched which can perform spectroscopy with E/dE > 100: AXAF in 1998, XMM in 1999, and Astro-E in 2000. Dispersive spectrometers on board AXAF and XMM will be powerful tools for low-energy lines, while the calorimeter on board Astro-E will examine the Fe-K line profile. Spectral resolution E/dE of several hundred will reveal the intensity ratio of satellite and resonance lines. This will give us physical parameters, such as the density and absolute size of surrounding matter. We hope that the structure of the nucleus will be more deeply understood using X-ray spectroscopy with new instruments, and we will come close to the level of optical spectroscopy, which has worked well in the study of the outskirts of AGN.


1992 ◽  
Vol 37 (6) ◽  
pp. 1231-1243
Author(s):  
A J Waker ◽  
M T Eivazi ◽  
T T Williams

2021 ◽  
Vol 11 (10) ◽  
pp. 4349
Author(s):  
Tianzhong Xiong ◽  
Wenhua Ye ◽  
Xiang Xu

As an important part of pretreatment before recycling, sorting has a great impact on the quality, efficiency, cost and difficulty of recycling. In this paper, dual-energy X-ray transmission (DE-XRT) combined with variable gas-ejection is used to improve the quality and efficiency of in-line automatic sorting of waste non-ferrous metals. A method was proposed to judge the sorting ability, identify the types, and calculate the mass and center-of-gravity coordinates according to the shading of low-energy, the line scan direction coordinate and transparency natural logarithm ratio of low energy to high energy (R_value). The material identification was satisfied by the nearest neighbor algorithm of effective points in the material range to the R_value calibration surface. The flow-process of identification was also presented. Based on the thickness of the calibration surface, the material mass and center-of-gravity coordinates were calculated. The feasibility of controlling material falling points by variable gas-ejection was analyzed. The experimental verification of self-made materials showed that identification accuracy by count basis was 85%, mass and center-of-gravity coordinates calculation errors were both below 5%. The method proposed features high accuracy, high efficiency, and low operation cost and is of great application value even to other solid waste sorting, such as plastics, glass and ceramics.


Author(s):  
Asahina Shunsuke ◽  
Takahashi Hideyuki ◽  
Takakura Masaru ◽  
Ferdi Schüth ◽  
Terasaki Osamu

Sign in / Sign up

Export Citation Format

Share Document