Hydration mechanism of tricalcium aluminate with gypsum at 1:1 mole ratio at low water/solid ratio and in suspension

1984 ◽  
Vol 74 (1-3) ◽  
pp. 113-121 ◽  
Author(s):  
F.H. Mosalamy ◽  
M.A. Shater ◽  
H. El-Didamony
1984 ◽  
Vol 74 (1-3) ◽  
pp. 123-129 ◽  
Author(s):  
F.H. Mosalamy ◽  
M.A. Shater ◽  
H. El-Didamony ◽  
R. El-Sheikh

1983 ◽  
Vol 69 (3) ◽  
pp. 379-388 ◽  
Author(s):  
M.A. Shater ◽  
F.H. Mosalamy ◽  
R. El-Sheikh ◽  
H. El-Didamony

2013 ◽  
Vol 864-867 ◽  
pp. 1923-1928
Author(s):  
Yue Xu ◽  
Jian Xi Li ◽  
Li Li Kan

A new kind of high strength cementitious material is made from phosphogypsum (PG), active carbon and fly-ash. Through the orthogonal research, it was showed that the calcination temperature, retention time, dosage of active carbon and fly ash on the compressive strength of cementitious binder are the most important. The result also showed that, in the conditions of temperature 1200°C, time retention 30 min, dosage of active carbon 10%, dosage of fly ash 5%, the compressive strength of the cementitious material for 3d and 28d could reach to 46.35MPa and 92.70MPa, the content of sulfur trioxide was 11.60% accordingly. A lot of active mineral materials, such as dicalcium silicate, tricalcium silicate, tricalcium aluminate were formed in the calcination. The C-S-H gel, calcium hydroxide and ettringite were found in 3d and 28d hydrates. It is found that the lime saturation ratio and silica modulus need to be control between 0.40~0.65 and 4~8 in order to produce high strength cementitious material.


2021 ◽  
Vol 11 (13) ◽  
pp. 6026
Author(s):  
Laura Mereles ◽  
Silvia Caballero ◽  
Alberto Burgos-Edwards ◽  
Macarena Benítez ◽  
Danya Ferreira ◽  
...  

Sicana odorifera is a native fruit of South America large in size. Its dark-colored skin constitutes a useful byproduct for obtaining bioactive molecules because it is rich in polyphenolic compounds, such as anthocyanins. Obtaining appropriate extracts for obtaining anthocyanins can be useful for multiple applications in the food industry or for obtaining phytopharmaceuticals. In this work, the fruit and its peel composition were evaluated, an anthocyanin extraction system was designed and optimized, and the extract obtained was characterized. The peel composition of S. odorifera ripe fruits from the black accession growing in Paraguay was rich in polyphenol compounds and anthocyanins. Ultrasound-assisted extractions of total anthocyanins were studied, and the extraction variables were optimized. First, a screening design was considered to analyze time, pH, liquid–solid ratio, solvent concentration, and temperature. From the screening design, the significant variables were considered in a Box–Behnken design, and a response surface methodology was applied. The resulting total anthocyanin extract was characterized by UPLC-DAD-MS / MS-ESI. The most efficient system for the extraction of anthocyanins from the peel was at 15 min, 20 °C, pH = 6, 60% ethanol, and 80 mL/g of liquid–solid ratio. The highest concentration obtained was 61.908 mg C3G/g peel extract. In the extract, 12 main compounds were tentatively identified, including five anthocyanin derivatives, five flavonol derivatives, and two flavonol aglycones. This study provides information for the obtention of an anthocyanin-based dye from black kurugua peel, possibly useful for future applications as a natural colorant in high-added-value foods due to its antioxidant characteristics.


2021 ◽  
Vol 719 (2) ◽  
pp. 022079
Author(s):  
Xiuyan Jing ◽  
Yan Zhang ◽  
Huaqing Liu ◽  
Jialong Liu ◽  
Sen Kong

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1006
Author(s):  
Akira Yoneyama ◽  
Heesup Choi ◽  
Masumi Inoue ◽  
Jihoon Kim ◽  
Myungkwan Lim ◽  
...  

Recently, there has been increased use of calcium-nitrite and calcium-nitrate as the main components of chloride- and alkali-free anti-freezing agents to promote concrete hydration in cold weather concreting. As the amount of nitrite/nitrate-based accelerators increases, the hydration of tricalcium aluminate (C3A phase) and tricalcium silicate (C3S phase) in cement is accelerated, thereby improving the early strength of cement and effectively preventing initial frost damage. Nitrite/nitrate-based accelerators are used in larger amounts than usual in low temperature areas below −10 °C. However, the correlation between the hydration process and strength development in concrete containing considerable nitrite/nitrate-based accelerators remains to be clearly identified. In this study, the hydrate composition (via X-ray diffraction and nuclear magnetic resonance), pore structures (via mercury intrusion porosimetry), and crystal form (via scanning electron microscopy) were determined, and investigations were performed to elucidate the effect of nitrite/nitrate-based accelerators on the initial strength development and hydrate formation of cement. Nitrite/nitrate-AFm (aluminate-ferret-monosulfate; AFm) was produced in addition to ettringite at the initial stage of hydration of cement by adding a nitrite/nitrate-based accelerator. The amount of the hydrates was attributed to an increase in the absolute amounts of NO2− and NO3− ions reacting with Al2O3 in the tricalcium aluminate (C3A phase). Further, by effectively filling the pores, it greatly contributed to the enhancement of the strength of the hardened cement product, and the degree of the contribution tended to increase with the amount of addition. On the other hand, in addition to the occurrence of cracks due to the release of a large amount of heat of hydration, the amount of expansion and contraction may increase, and it is considered necessary to adjust the amount used for each concrete work.


Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4992
Author(s):  
Ruimeng Shi ◽  
Xiaoming Li ◽  
Yaru Cui ◽  
Junxue Zhao ◽  
Chong Zou ◽  
...  

Nickel slags can be produced through ferronickel preparation by the pyrometallurgical processing of laterite nickel ores; however, such techniques are underutilized at present, and serious environmental problems arise from the stockpiling of such nickel ores. In this study, a modification to the process of ferronickel preparation by the direct reduction of carbon bases in laterite nickel ores is proposed. The gangue from the ore is used as a raw material to prepare a cementitious material, with the main components of tricalcium silicate and tricalcium aluminate. By using FactSage software, thermodynamic calculations are performed to analyze the reduction of nickel and iron and the effect of reduction on the formation of tricalcium silicate and tricalcium aluminate. The feasibility of a coupled process to prepare ferronickel and cementitious materials by the direct reduction of laterite nickel ore and gangue calcination, respectively, is discussed under varying thermodynamic conditions. Different warming strategies are applied to experimentally verify the coupled reactions. The coupled preparation of ferronickel and cementitious materials with calcium silicate and calcium aluminate as the main phases in the same experimental process is realized.


Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2494
Author(s):  
Wei Wang ◽  
Yu-Ting Gao ◽  
Ji-Wen Wei ◽  
Yin-Feng Chen ◽  
Qing-Lei Liu ◽  
...  

In this paper, ultrasonic cellulase extraction (UCE) was applied to extract polyphenols from passion fruit. The extraction conditions for total phenol content (TPC) and antioxidant activity were optimized using response surface methodology (RSM) coupled with a Box-Behnken design (BBD). The results showed that the liquid-to-solid ratio (X2) was the most significant single factor and had a positive effect on all responses. The ANOVA analysis indicated quadratic models fitted well as TPC with R2 = 0.903, DPPH scavenging activity with R2 = 0.979, and ABTS scavenging activity with R2 = 0.981. The optimal extraction parameters of passion fruit were as follows: pH value of 5 at 30 °C for extraction temperature, 50:1 (w/v) liquid-to-solid ratio with extraction time for 47 min, the experimental values were found matched with those predicted. Infrared spectroscopy suggested that the extract contained the structure of polyphenols. Furthermore, three main polyphenols were identified and quantified by HPLC. The results showed the content of phenolic compounds and antioxidant activity of the optimized UCE were 1.5~2 times higher than that determined by the single extraction method and the Soxhlet extraction method, which indicates UCE is a competitive and effective extraction technique for natural passion fruit polyphenols.


Sign in / Sign up

Export Citation Format

Share Document