Effect of pH on the dissolution of drug particle dispersed in solid matrix of hydrogenated soya phospholipid

1989 ◽  
Vol 49 (2) ◽  
pp. 179-181 ◽  
Author(s):  
Koichi Takahashi ◽  
Toyoshi Katagi ◽  
Satoko Tamagawa ◽  
Toshiaki Nishihata
Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.


HortScience ◽  
1993 ◽  
Vol 28 (10) ◽  
pp. 981-984 ◽  
Author(s):  
Jay Frick ◽  
Cary A. Mitchell

2-[N-morpholino] ethanesulfonic acid (MES) buffer or Amberlite DP-1 (cation-exchange resin beads) were used to stabilize substrate pH of passive-wicking, solid-matrix hydroponic systems in which small canopies of Brassica napus L. (CrGC 5-2, genome: ACaacc) were grown to maturity. Two concentrations of MES (5 or 10 m m) were included in Hoagland 1 nutrient solution. Alternatively, resin beads were incorporated into the 2 vermiculite: 1 perlite (v/v) growth medium at 6% or 12% of total substrate volume. Both strategies stabilized pH without toxic side effects on plants. Average seed yield rates for all four pH stabilization treatments (13.3 to 16.9 g·m-2·day-1) were about double that of the control (8.2 g·m-2·day-1), for which there was no attempt to buffer substrate pH. Both the highest canopy seed yield rate (16.9 g·m-2·day-1) and the highest shoot harvest index (19.5%) occurred with the 6% resin bead treatment, even though the 10 mm MES and 12% bead treatments maintained pH within the narrowest limits. The pH stabilization methods tested did not significantly affect seed oil and protein contents.


HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 550a-550 ◽  
Author(s):  
Royal G. Fader ◽  
Martin J. Bukovac

We have reported that NH4NO3 (AN, 8 mM, pH 4.2), applied as simulated spray droplets, enhanced penetration of 14C-NAA through isolated leaf and fruit cuticles. One explanation for this response is that AN depresses NAA (pKa= 4.2) dissociation, increasing the nondissociated moiety, which penetrates more readily than the anion (NAA'). Direct measurement of AN (concn. 0-800 mM) effect on NAA (215 μM) dissociation as indexed by change in solution pH revealed no significant effect, with a pH change from 4.19 to 4.05. This change is not sufficient to account for the observed enhancement. When 14C-NAA, buffered (20 mM sodium citrate) at pH 3.2, 4.2, 5.2, 6.2, was partitioned against chloroform, there was a marked increase in NAA partitioning into chloroform as pH was decreased. AN (8 mM) did not alter this partition behavior, also indicating no effect on NAA dissociation. However, in cuticle penetration studies, using a finite dose system with 14C-NAA buffered at pH 3.2, 4.2, 5.2, 6.2, and in the presence and absence of 8 mM AN, there was no marked or consistent pH or AN (-70 to + 232 % of no AN control) effect on penetration as indexed by initial slope (4-12 h) or penetration after 120 h. The possible effects of AN and buffer on penetration of 14C-NAA from the droplet deposit will be discussed.


2019 ◽  
Vol 16 (3) ◽  
pp. 347-352 ◽  
Author(s):  
M. Vlachou ◽  
G. Stavrou ◽  
A. Siamidi ◽  
S. Flitouri ◽  
V. Ioannidou ◽  
...  

Background: N-Acetylserotonin (NAS, N-acetyl-5-hydroxytryptamine) is the immediate precursor of the neurohormone melatonin (MT, N-acetyl-5-methoxytryptamine), which regulates sleep and wake cycles. NAS is produced by the N-acetylation of serotonin and is converted to melatonin via the action of Acetylserotonin O-methyltransferase (ASMT). Like melatonin, NAS acts as an agonist on the melatonin receptors MT1, MT2, and MT3. However, as NAS is abundant in specific brain areas, separate from serotonin and melatonin, it may also have discrete central effects. Indicatively, it has been reported that NAS may play a role in the antidepressant effects of Selective Serotonin Reuptake Inhibitors (SSRIs) and Monoamine Oxidase Inhibitors (MAOIs). </P><P> Objective: To decipher the controlled release characteristics of the active substances (NAS and MT) in a quick initial pace, aiming at a satisfactory sleep-onset related anti-depressive profile and prolonged release, thereafter, targeting at coping with poor sleep quality problems. </P><P> Methods: A series of hydrophilic matrix tablets involving as excipients, hydroxypropylmethylcellulose (HPMC) K15M, low viscosity sodium alginate, lactose monohydrate, and polyvinylpyrrolidone (PVP) M.W.: 10.000 and 55.000) was developed and tested at two dissolution media (pH 1.2 and 7.4). </P><P> Results: The results showed that commonly used excipients with different physicochemical properties govern the controlled release of NAS and MT from solid matrix systems. </P><P> Conclusions: We have demonstrated how broadly used excipients affect the in vitro controlled release of NAS and MT from solid pharmaceutical formulations. Currently, we extend our studies on the controlled release of these drugs using various other biopolymers/formulants of different physicochemical characteristics, which will help to highlight the discrete release profiles of NAS and MT.


Sign in / Sign up

Export Citation Format

Share Document