Water-in-Oil-in-Water Double Emulsions as Protective Carriers for Sambucus nigra L. Coloring Systems

The use of natural colorants is needed to overcome consumer concerns regarding synthetic food colorants′ safety. However, natural pigments have, in general, poor stability against environmental stresses such as temperature, ionic strength, moisture, light, and pH, among others. In this work, water-in-oil-in-water (W1/O/W2) emulsions were used as protective carriers to improve color stability of a hydrophilic Sambucus nigra L. extract against pH changes. The chemical system comprised water and corn oil as the aqueous and oil phases, respectively, and polyglycerol polyricinoleate (PGPR), Tween 80, and gum Arabic as stabilizers. The primary emulsion was prepared using a W1/O ratio of 40/60 (v/v). For the secondary emulsion, W1/O/W2, different (W1/O)/W2 ratios were tested with the 50/50 (v/v) formulation presenting the best stability, being selected as the coloring system to test in food matrices of different pH: natural yogurt (pH 4.65), rice drink (pH 6.01), cow milk (pH 6.47), and soy drink (pH 7.92). Compared to the direct use of the extract, the double emulsion solution gave rise to higher color stability with pH change and storage time, as corroborated by visual and statistical analysis.

Formation of Natural Egg Yolk Granule Stabilized Pickering High Internal Phase Emulsions by Means of NaCl Ionic Strength and pH Change

Pickering high internal phase emulsions (HIPEs) are gel-like concentrated emulsions that have the potential to be an alternative to partially hydrogenated oil (PHO). In this study, egg yolk granules (EYGs), natural complexes of protein and lipid isolated from egg yolk, were used as an emulsifier to prepare Pickering HIPEs. Gel-like HIPEs with an oil phase volume fraction of 85% and with an emulsifier concentration of only 0.5% could be prepared by using EYGs as an emulsifier. The EYGs were able to form stable HIPEs at NaCl ionic strengths over 0.2 M and at pH over 5.0 with NaCl ionic strength of 0.3 M. The EYGs, which could stabilize HIPEs, were easily to adsorb and cover the oil-water interface to form emulsion droplets with small particle size. In addition, interacting EYGs in the aqueous phase formed a continuous network structure, and the oil droplets packed closely, exhibiting high elasticity and shear thinning behavior. Furthermore, the formed HIPEs had suitable storage stability with no significant changes in appearance and microstructure after storage for 60 days. This work can transform traditional oils from liquid-like to solid-like by using EYGs to enrich food processing diversity and improve the storage stability of oils while reducing the intake of PHO and providing a healthier diet for consumers.

Controlled release of metal phenolic network protected phage for treating bacterial infection

Phage is a promising therapeutic agent for treating antibiotic resistant bacteria. However, in the process of treatment, phage may be cleared by the immune system and cleaved by protease, which could affect the efficacy of phage. In order to solve the above problems, phage encapsulation is usually adopted. In this study, we employed metal phenolic network (MPN) for efficient phage encapsulation which could protect phage from the cleavage of protease, and keep cytotoxicity weak. In the model of skin wound infection, the encapsulated phage could be released in response to pH change to achieve good antibacterial effect. Furthermore, the MPN encapsulation could prolong the T4 phage residence time at the wound. Our findings suggest that MPN can be a promising material for phage encapsulation.

Biocompatible and Thermoresistant Hydrogels Based on Collagen and Chitosan

Hydrogels are considered good biomaterials for soft tissue regeneration. In this sense, collagen is the most used raw material to develop hydrogels, due to its high biocompatibility. However, its low mechanical resistance, thermal stability and pH instability have generated the need to look for alternatives to its use. In this sense, the combination of collagen with another raw material (i.e., polysaccharides) can improve the final properties of hydrogels. For this reason, the main objective of this work was the development of hydrogels based on collagen and chitosan. The mechanical, thermal and microstructural properties of the hydrogels formed with different ratios of collagen/chitosan (100/0, 75/25, 50/50, 25/75 and 0/100) were evaluated after being processed by two variants of a protocol consisting in two stages: a pH change towards pH 7 and a temperature drop towards 4 °C. The main results showed that depending on the protocol, the physicochemical and microstructural properties of the hybrid hydrogels were similar to the unitary system depending on the stage carried out in first place, obtaining FTIR peaks with similar intensity or a more porous structure when chitosan was first gelled, instead of collagen. As a conclusion, the synergy between collagen and chitosan improved the properties of the hydrogels, showing good thermomechanical properties and cell viability to be used as potential biomaterials for Tissue Engineering.

Chemical Dissolution of Chalcopyrite Concentrate in Choline Chloride Ethylene Glycol Deep Eutectic Solvent

Currently, the high demand for copper is in direct contrast with the decrease in the mineral grade and, more significantly, the concerns regarding the environmental impact that arise as a result of processing such low-grade materials. Consequently, new mineral processing concepts are needed. This work explores the chemical dissolution of chalcopyrite concentrate at ambient pressure and moderate temperatures in a deep eutectic solvent. Copper and iron are dissolved without changing their oxidation state, without solvent pH change, and stabilized as a chloride complex with no evidence of passivation. Chemical equilibria of the metallic chloride complexes limit the dissolution, and the step that is rate-controlling of the kinetics is the interdiffusion of species in the solvent. The chemical mechanism may involve initial chloride adsorption at positive sites of the solid surface, pointing out the importance of surfaces states on chalcopyrite particles. A model based on a shrinking particle coupled with pseudo-second-order increase in the liquid concentration of copper describes the dissolution kinetics and demonstrates the importance of the liquid to solid ratio. Iron and copper can be recovered separately from the solvent, which highlights that this concept is an interesting alternative to both redox-hydrometallurgy and pyrometallurgy to obtain copper by the processing of chalcopyrite concentrate.

EFFECT OF DOLOMITE AND CHICKEN MANURE APPLICATION ON PAK CHOI (Brassica rapa chinensis) PRODUCTION AND CARBON DIOXIDE EMISSIONS IN TROPICAL PEATLANDS

The current study was aimed to determine the effect of ameliorant on Pak choi (Brassica rapa chinensis) productivity, CO2 emissions, and factors affecting the rate of CO2 emission. The study was carried out using a non-factorial completely randomized design with seven treatments. The imposed treatment are without ameliorant (control), 10, 20, 30 ton ha-1 chicken manure, 4 ton ha-1 Dolomite + Chicken Manure @ 10 ton ha-1, Dolomite 4 ton ha-1 + Chicken Manure @ 20 ton ha-1 and Dolomite 4 ton ha-1 + Chicken Manure @ 30 ton ha-1. The variables observed are the chemical properties of peat soil, fresh and dry weight of pak choi, CO2 emissions, and factors that affect CO2 emissions. The results of the study revealed that the combination of Dolomite and chicken manure has a significant effect on the studied parameters and the combination of 4 ton ha-1 dolomite + 30 ton ha-1 chicken manure had the highest pH change (average of 6.36), highest productivity, and CO2 emission (344.42 mg cm-2hr-1). Results of the study can be concluded that Dolomite and chicken manure has a significant effect on the various growth parameters of B. rapa chinensis and the properties of the peat soil.

Exploring the Retinal Binding Cavity of Archaerhodopsin-3 by Replacing the Retinal Chromophore With a Dimethyl Phenylated Derivative

Rhodopsins act as photoreceptors with their chromophore retinal (vitamin-A aldehyde) and they regulate light-dependent biological functions. Archaerhodopsin-3 (AR3) is an outward proton pump that has been widely utilized as a tool for optogenetics, a method for controlling cellular activity by light. To characterize the retinal binding cavity of AR3, we synthesized a dimethyl phenylated retinal derivative, (2E,4E,6E,8E)-9-(2,6-Dimethylphenyl)-3,7-dimethylnona-2,4,6,8-tetraenal (DMP-retinal). QM/MM calculations suggested that DMP-retinal can be incorporated into the opsin of AR3 (archaeopsin-3, AO3). Thus, we introduced DMP-retinal into AO3 to obtain the non-natural holoprotein (AO3-DMP) and compared some molecular properties with those of AO3 with the natural A1-retinal (AO3-A1) or AR3. Light-induced pH change measurements revealed that AO3-DMP maintained slow outward proton pumping. Noteworthy, AO3-DMP had several significant changes in its molecular properties compared with AO3-A1 as follows; 1) spectroscopic measurements revealed that the absorption maximum was shifted from 556 to 508 nm and QM/MM calculations showed that the blue-shift was due to the significant increase in the HOMO-LUMO energy gap of the chromophore with the contribution of some residues around the chromophore, 2) time-resolved spectroscopic measurements revealed the photocycling rate was significantly decreased, and 3) kinetical spectroscopic measurements revealed the sensitivity of the chromophore binding Schiff base to attack by hydroxylamine was significantly increased. The QM/MM calculations show that a cavity space is present at the aromatic ring moiety in the AO3-DMP structure whereas it is absent at the corresponding β-ionone ring moiety in the AO3-A1 structure. We discuss these alterations of the difference in interaction between the natural A1-retinal and the DMP-retinal with binding cavity residues.

A Ru/RuO2-Doped TiO2 Nanotubes as pH Sensors for Biomedical Applications: The Effect of the Amount and Oxidation of Deposited Ru on the Electrochemical Response

In the field of orthopedic or dental implants, titanium and its alloys are most commonly used because of their excellent mechanical and corrosion properties and good biocompatibility. After implantation into the patient’s body, there is a high risk of developing bacterial inflammation, which negatively affects the surrounding tissues and the implant itself. Early detection of inflammation could be done with a pH sensor. In this work, pH-sensitive systems based on TiO2-Ru and TiO2-RuO2 combinations were fabricated and investigated. As a base material, Ti-6Al-4V alloy nanostructured by anodic oxidation was used. Ruthenium was successfully deposited on nanotubular TiO2 using cyclic polarization, galvanostatic and potentiostatic mode. Potentiostatic mode proved to be the most suitable. The selected samples were oxidized by cyclic polarization to form a TiO2-RuO2 system. The success of the oxidation was confirmed by XPS analysis. The electrochemical response of the systems to pH change was measured in saline solution using different techniques. The measurement of open circuit potential showed that unoxidized samples (TiO2-Ru) exhibited sub-Nernstian behavior (39.2 and 35.8 mV/pH). The oxidized sample (TiO2-RuO2) containing the highest amount of Ru exhibited super-Nernstian behavior (67.3 mV/pH). The Mott–Schottky analysis proved to be the best method. The use of the electrochemical impedance method can also be considered, provided that greater stability of the samples is achieved.

Topical Application of Galgeunhwanggeumhwangryeon-Tang Recovers Skin-Lipid Barrier and Ameliorates Inflammation via Filaggrin-Thymic Stromal Lymphopoietin-Interleukin 4 Pathway

Background and objectives: The purpose of this study was to confirm the effect of Galgeunhwanggeumhwangryeon-tang (GGRT) on the skin barrier integrity and inflammation in an atopic dermatitis-like animal model. Materials and Methods: The model was established using lipid barrier elimination (LBE) in BALB/c mice. Ceramide 3B, a control drug, and GGRT were applied to the skin of LBE mice. Gross observation and histological examination were combined with measurement of skin score, trans-epidermal water loss, and pH. The expression of filaggrin, kallikrein-related peptidase 7 (KLK7), protease-activated receptor-2 (PAR-2), thymic stromal lymphopoietin (TSLP), and interleukin 4 (IL-4) was examined. Results: The effect of GGRT on atopic dermatitis was estimated in silico using two individual gene sets of human atopic dermatitis. In animal experiments, GGRT treatment reduced atopic dermatitis-like symptoms, as confirmed via gross and histological observations, skin score, pH change, and trans-epidermal water loss. The expression level of filaggrin increased in the skin of GGRT-treated mice compared to that in the LBE group. The expression levels of KLK7, PAR2, TSLP, and IL-4 were decreased in GGRT-treated mice skin compared to those in LBE mice. Conclusions: We demonstrated that GGRT restored the skin barrier and reduced inflammatory reactions in a murine model of atopic dermatitis.

Electrodeposited Ni-Fe onto Glassy Carbon for the Detection of Methylene Blue

A composite electrode composed of electrodeposited, nickel-iron nanostructured clusters onto a glassy carbon (GC) disk electrode was used as a working electrode to detect methylene blue at concentrations below 10 μM. The Ni-Fe clusters were prepared by pulse electrodeposition and a lateral composition variation was observed reflective of a local pH change across the Ni-Fe feature. The applied potential for the detection of MB at a pH of 4 was determined through voltammetry and demonstrated using chronoamperometry and electrochemical impedance spectroscopy (EIS) where the adsorption of MB influenced both the capacitance, C, and ohmic resistance, Rs. A peak present in it1/2 vs t chronoamperometry plots decreased with lower MB bulk concentration, while in contrast, the RsC parameters determined from equivalent circuit models of EIS had the opposite behavior having a larger signal with lower MB concentration, and hence providing a way to increase the detection signal at lower MB concentration.