Heterogeneous photocatalysis of organic dyes

Author(s):  
Prerana D. Tomke ◽  
Virendra K. Rathod
Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 117
Author(s):  
Zahir Muhammad ◽  
Farman Ali ◽  
Muhammad Sajjad ◽  
Nisar Ali ◽  
Muhammad Bilal ◽  
...  

Degradation of organic dyes and their byproducts by heterogeneous photocatalysts is an essential process, as these dyes can be potentially discharged in wastewater and threaten aquatic and xerophyte life. Therefore, their complete mineralization into nontoxic components (water and salt) is necessary through the process of heterogeneous photocatalysis. In this study, Zr/CrO2 (Zirconium-doped chromium IV oxide) nanocomposite-based photocatalysts with different compositions (1, 3, 5, 7 & 9 wt.%) were prepared by an environmentally friendly, solid-state reaction at room temperature. The as-prepared samples were calcined under air at 450 °C in a furnace for a specific period of time. The synthesis of Zr/CrO2 photocatalysts was confirmed by various techniques, including XRD, SEM, EDX, FT-IR, UV-Vis, and BET. The photocatalytic properties of all samples were tested towards the degradation of methylene blue and methyl orange organic dyes under UV light. The results revealed a concentration-dependent photocatalytic activity of photocatalysts, which increased the amount of dopant (up to 5 wt.%). However, the degradation efficiency of the catalysts decreased upon further increasing the amount of dopant due to the recombination of holes and photoexcited electrons.


2021 ◽  
Author(s):  
Weitao Gong ◽  
Xiaorong Deng ◽  
Kaixun Dong ◽  
Lu Liu ◽  
Guiling Ning

The incorporation of pure organic dyes into the backbone of conjugated microporous polymers (CMPs) opens a new avenue for facile constructing metal-free heterogeneous photocatalysts with tailor-made properties. Herein, we presented...


Author(s):  
Mekdes Gerawork

Abstract Heterogeneous photocatalysis using nanocomposites is of great research interest in the treatment of industrial wastewater. The impregnated photocatalyst was produced by liquid state reaction of ZnO/CuO nanocomposite with extracted eggshells. The structure, functional group, metal composition, bandgap, and photocatalytic activity of the nanocomposites were characterized by using XRD, FTIR, AAS, and UV-vis spectroscopy, respectively in the absence and presence of eggshells. Photocatalytic degradation activities of the nanocomposites under UV light irradiation have been tested for a real sewage sample taken from Debre Berhan Textile Industry. From the results, the optimized degradation efficiency of the dye was 97.95% with 0.4 g dose of the photocatalyst, 120 min irradiation time, 120 °C temperature, and pH of 6.7. The results revealed that eggshell impregnated nanocomposite had better catalytic activity than the naked nanocomposite. This is due to the highly porous structure of eggshell biomasses and their sorption characteristics In conclusion when nanocomposites are supported by eggshell biomasses, they are excellent photocatalysts and consecutively it minimizes the contamination of organic dyes from textile effluents.


2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Zhiying Yan ◽  
Wenjuan Gong ◽  
Yongjuan Chen ◽  
Deliang Duan ◽  
Junjie Li ◽  
...  

Heterogeneous photocatalysis is able to operate effectively to eliminate organic compounds from wastewater in the presence of semiconductor photocatalyst and a light source. Although photosensitization of titania by organic dyes is one of the conventional ways for visible-light utilization of titania, previous studies have not yet addressed the use of natural food coloring agents as templates in the synthesis of mesostructured materials, let alone the simultaneous achievement of highly crystalline mesoscopic framework and visible-light photocatalytic activity. In this work, anthocyanin, a natural pigment from red radish was directly used as template in synthesis of highly crystalline mesoporous titania. The synthesized mesoporous titania samples were characterized by a combination of various physicochemical techniques, such as XRD, SEM, HRTEM, nitrogen adsorption/desorption, and diffuse reflectance UV-Vis. The prepared mesoporous titania photocatalyst exhibited significant activity under visible-light irradiation for the degradation of dyes and phenols due to its red shift of band-gap-absorption onset and visible-light response as a result of the incorporation of surface carbon species.


2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Chin Wei Lai ◽  
Joon Ching Juan ◽  
Weon Bae Ko ◽  
Sharifah Bee Abd Hamid

Today, organic dyes are one of the largest groups of pollutants release into environment especially from textile industry. It is highly toxic and hazardous to the living organism; thus, the removal of these dyes prior to discharge into the environment is essential. Varieties of techniques have been employed to degrade organic dyes and heterogeneous photocatalysis involving titanium dioxide (TiO2) appears to be the most promising technology. In recent years, TiO2nanotubes have attracted much attention due to their high surface area and extraordinary characteristics. This paper presents a critical review of recent achievements in the modification of TiO2nanotubes for dye degradation. The photocatalytic activity on dye degradation can be further enhanced by doping with cationic or anionic dopant.


Author(s):  
Jagannath Panda ◽  
Satya Narayan Sahu ◽  
Rashmi Rekha Tripathy ◽  
Tejaswini Sahoo ◽  
Jnana Ranjan Sahu ◽  
...  

2017 ◽  
Vol 5 (26) ◽  
pp. 13757-13762 ◽  
Author(s):  
Yusen Li ◽  
Mingxuan Liu ◽  
Long Chen

Anderson-type polyoxometalate built-in conjugated microporous polymers were prepared via a bottom-up strategy and served as a good heterogeneous photocatalyst for the degradation of organic dyes.


Coatings ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 919
Author(s):  
Umberto Bellè ◽  
Filippo Pelizzari ◽  
Andrea Lucotti ◽  
Chiara Castiglioni ◽  
Marco Ormellese ◽  
...  

Heterogeneous photocatalysis with titanium dioxide (TiO2) is considered one of the most promising Advanced Oxidation Processes (AOPs). In order to solve issues related to catalyst recovery and possible agglomeration, which are typical of catalysts in nanoparticle form, self-organized nanotubular TiO2 films directly immobilized on a metal substrate can be produced through anodization. In this study, a nanotubular anodic oxide was tested in the degradation of three organic dyes, namely Direct Red 80, Methylene Blue, and Rhodamine B, in single, binary, and ternary mixtures, to simulate industrial effluents with the co-presence of multiple dyes. To better understand the dyes’ behavior and possible interaction effects, spectrophotometry was used to analyze the degradation of each dye in the mixture. The zero-crossing first-order derivative approach and double divisor ratio spectra derivative method were used for the analysis of binary and ternary mixtures, respectively, to overcome quantification problems due to spectra overlapping. The photocatalytic system demonstrated good efficiency, supporting the use of nanotubular TiO2 as a photocatalyst for dye mixtures. Moreover, the interaction among dyes can actually affect, both positively and negatively, photodegradation kinetics, posing an issue in understanding the actual efficiency of the purification process as a function of the effluent composition.


2019 ◽  
Vol 299 ◽  
pp. 01002
Author(s):  
Alexandra Banu ◽  
Madalina Mocirla ◽  
GizemNur Soylu

Methyl orange (MO) is an environmental concern because their degradation products are highly toxic to aquatic microorganisms and carcinogenic, also their degradation products are mutagenic to humans. Electrochemical oxidation is one of the promising technologies for the dye wastewater de-pollution, which are obtained extensively attentions because it holds the advantages of total oxidization of dyes to CO2 and H2O. Titanium dioxide has emerged as the leading candidate to provide complete destruction of organic pollutants via heterogeneous photocatalysis that result in total mineralization of many organic pollutants. Though this process offers actual annihilation of the dye moleculesatavery high efficiency, thepost-treatmentrecoveryof TiO2 canbecostly. The titanium nanotubes are typically produced by anodic oxidation of the titanium foil in various electrolytes.Degradation of methyl orange (MO) was conducted by electrochemical oxidation method with Ti/TiO 2 nanotubes anodes. Were prepared samples of TiO2 nanotubes by anodizing titanium in an electrochemical bath consisting of 1:1 waterglycerol with 0.4% of HF using different conditions: 25V for 8 hours, 30V for 3 hours in the stationary state, 30V 3 hours under ultrasound stirring. The oxidation efficiency was determined by UV-VIS analysis of the electrolyte.


Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 263
Author(s):  
Szabolcs Bognár ◽  
Predrag Putnik ◽  
Daniela Šojić Merkulov

Polluting the natural water resources is a serious global issue, which is confirmed by the fact that today at least 2 billion people consume water from contaminated sources. The conventional wastewater treatment methods cannot effectively remove the persistent pollutants (e.g., drugs, organic dyes, pesticides) from the aqueous environment. Heterogeneous photocatalysis is a promising and sustainable alternative for water remediation. It is based on the interaction between light irradiation and the semiconductors (e.g., TiO2, ZnO) as photocatalysts, but these compounds, unfortunately, have some disadvantages. Hence, great attention has been paid to the nanotechnology as a possible way of improvement. Nanomaterials have extraordinary properties; however, their conventional synthesis is often difficult and requires a significant amount of dangerous chemicals. This concise topical review gives recent updates and trends in development of sustainable and green pathways in the synthesis of nanomaterials, as well as in their application for water remediation. In our review we put emphasis on the eco-friendly, mostly plant extract-based materials. The importance of this topic, including this study as well, is proved by the growing number of publications since 2018. Due to the current serious environmental issues (e.g., global warming, shortage of pure and quality water), it is necessary for the traditional TiO2 and ZnO semiconductors to be replaced with the harmless, non-toxic, and more powerful nanocomposites as photocatalysts. Not only because of their higher efficiency as compared to the bulk semiconductors, but also because of the presence of biomolecules that can add up to the pollutant removal efficiency, which has been already confirmed in many researches. However, despite the fact that the application of heterogeneous photocatalysis together with green nanotechnology is absolutely the future in water purification, there are some challenges which have to be overcome. The exact effects of the biomolecules obtained from plants in the synthesis of nanoparticles, as well as in the photocatalytic processes, are not exactly known and require further investigation. Furthermore, heterogeneous photocatalysis is a well-known and commonly examined process; however, its practical use outside the laboratory is expensive and difficult. Thus, it has to be simplified and improved in order to be available for everyone. The aim of our review is to suggest and prove that using these bio-inspired compounds it is possible to reduce human footprint in the nature.


Sign in / Sign up

Export Citation Format

Share Document