Challenges to the future domestication of seaweeds as cultivated species: understanding their physiological processes for large-scale production

Author(s):  
Leila Hayashi ◽  
Sarah de J. Cantarino ◽  
Alan T. Critchley
Author(s):  
Vangelis Papadimitropoulos

In this paper I present a critical overview of the contemporary political theories of the Commons, classified in three main categories: 1) the liberal 2) the reformist and 3) the anti-capitalist. Advocates of the liberal theory of the Commons take a stand in favour of the coexistence of the Commons with the state and the market. The reformists argue for the gradual adjustment of capitalism to the Commons with the aid of a partner state, while the anti-capitalists contrast both the liberals and the reformists by supporting the development of the commons against and beyond capitalism. I make the case that both the liberal and the anti-capitalist theorists miss the likelihood of technology rendering redundant large-scale production in the future, and forcing thus capitalism to adjust to the Commons in the long run. The prospect, therefore, of an open cooperativism introduced by the reformist theory holds significant potential with respect to the future development of the Commons. For the Commons however to expand and flourish, a global institutional reform, followed by a set of inter-local and international principles, is sine qua non. Hence, transparency of information, distribution of value, solidarity and bottom-up self-management are the core variables of individual and collective autonomy inasmuch as they permit a community or group to formulate its values in relation to the needs and skills of its members.


BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 7260-7287
Author(s):  
Nick Triantafillopoulos ◽  
Alexander A. Koukoulas

The expanded use of environmentally friendly and sustainable foodservice packaging continues to be a prime focus of stakeholders across the foodservice value chain. Paper-based coffee cups is one product segment where effective recycling of waste cups remains elusive. As a result, material substitutes for polyethylene liners are emerging to solve the problem of waste cups. In this paper, current and emerging commercial material technologies used in the production of paper-based coffee cups that are readily recyclable with other paper grades are reviewed. Many of these material solutions are also compostable. Special attention is paid to the rapidly evolving, alternative large-scale production of bioplastics. Multiple efforts to effectively develop a more environmentally friendly paper cup are also examined. It is clear that broad adoption of proposed solutions will require an integrated commitment and approach to circular economics. Specifically, this includes: changes in consumer behavior; brand owner initiatives to meet sustainability goals; governmental policies that limit or forbid use of fossil-based cups; and easily accessible infrastructures at the consumer level for the collection, separation, and processing of biodegradable cups.


RSC Advances ◽  
2017 ◽  
Vol 7 (51) ◽  
pp. 32094-32099 ◽  
Author(s):  
Qiang Zhou ◽  
Huiying Tan ◽  
Qiuhan Zhang ◽  
Nan Wang ◽  
Qianwen Wei ◽  
...  

Green and safe HAc acid was used as the reaction medium in the preparation process of Mn4+doped A2TiF6(X = Na, K and Cs) red phosphors, which is beneficial for the potential large scale production in the future.


2013 ◽  
Vol 760 ◽  
pp. 69-71 ◽  
Author(s):  
M.A. Shah

The unique properties of nanomaterials have motivated the researchers to develop the simpler and inexpensive techniques to produce nanostructures of technologically important materials. Several oxide nanostructures are produced to have tremendous applications in the future and among them, magnesium oxide (MgO) is an exceptionally important material for use in catalysis, toxic waste remediation, as an additive in refractory, paint and superconducting products Fang et a. (2006).


1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.


2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.


Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.


Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.


Sign in / Sign up

Export Citation Format

Share Document