Design of selective CIC filter functions

2014 ◽  
Vol 68 (12) ◽  
pp. 1231-1233 ◽  
Author(s):  
Biljana P. Stošić ◽  
Vlastimir D. Pavlović
Keyword(s):  
Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4199 ◽  
Author(s):  
Behnam Samadpoor Rikan ◽  
Sang-Yun Kim ◽  
Nabeel Ahmad ◽  
Hamed Abbasizadeh ◽  
Muhammad Riaz Ur Rehman ◽  
...  

This paper presents a second-order discrete-time Sigma-Delta (SD) Analog-to-Digital Converter (ADC) with over 80 dB Signal to Noise Ratio (SNR), which is applied in a signal conditioning IC for automotive piezo-resistive pressure sensors. To reduce the flicker noise of the structure, choppers are used in every stage of the high gain amplifiers. Besides, to reduce the required area and power, only the CIC filter structure is adopted as a decimation filter. This filter has a configurable structure that can be applied to different data rates and input signal bandwidths. The proposed ADC was fabricated and measured in a 0.18-µm CMOS process. Due to the application of only a CIC filter, the total active area of the SD-ADC and reference generator is 0.49 mm2 where the area of the decimation filter is only 0.075 mm2. For the input signal bandwidth of 1.22 kHz, it achieved over 80 dB SNR in a 2.5 MHz sampling frequency while consuming 646 µW power.


2020 ◽  
Vol 56 (23) ◽  
pp. 1241-1243
Author(s):  
Lin Zhibin ◽  
Gao Bo ◽  
Yin Ruotong ◽  
Gong Min

2004 ◽  
Vol 40 (21) ◽  
pp. 1383 ◽  
Author(s):  
G. Stephen ◽  
R.W. Stewart
Keyword(s):  

Sensors ◽  
2017 ◽  
Vol 17 (10) ◽  
pp. 2322 ◽  
Author(s):  
Peilu Liu ◽  
Xinghua Li ◽  
Haopeng Li ◽  
Zhikun Su ◽  
Hongxu Zhang

Author(s):  
A. S. Kang ◽  
Er.Vishal Sharma ◽  
Prof.Renu Vig

<span>In this paper, the Performance Analysis of Cascade Integrator Comb Filter in context of Filter Bank Multicarrier Transmission has been presented for Cognitive radio. A benefit of the chosen technique is that, a CIC filter can be designed with a slight adjustment in parameters of interest. The entire performance of the filters designed is analyzed and evaluated by analyzing Normalized Amplitude versus Normalized Frequency plots at typical K and N values. The roll off factor plays a significant role in performance analysis of CIC filter. The results shown are a useful advance for rf design engineers working in the domain of multirate signal processing in wireless communication. To ensure the acceptable performance of Enhanced FBMC, computational complexity, and transmission burst length need to be reduced. The effect of Stop band attenuation on the edges of Magnitude and Frequency responses has been studied under constraints such as Lp, K and M during different simulation runs</span>.


Sign in / Sign up

Export Citation Format

Share Document