Crop rotation and N application rate affecting the performance of winter wheat under deficit irrigation

2018 ◽  
Vol 210 ◽  
pp. 330-339 ◽  
Author(s):  
Wenli Qin ◽  
Xiying Zhang ◽  
Suying Chen ◽  
Hongyong Sun ◽  
Liwei Shao
Keyword(s):  
Winter Wheat ◽  
Crop Rotation ◽  
Deficit Irrigation ◽  
Application Rate ◽  
N Application ◽  
N Application Rate

Effects of tillage, crop rotation and N application rate on labile and recalcitrant soil carbon in a Mediterranean Vertisol

2017 ◽  
Vol 169 ◽  
pp. 118-123 ◽  
Author(s):  
Veronica Muñoz-Romero ◽  
Rafael J. Lopez-Bellido ◽  
Purificacion Fernandez-Garcia ◽  
Ramon Redondo ◽  
Sergio Murillo ◽  
...  
Keyword(s):  
Soil Carbon ◽  
Crop Rotation ◽  
Application Rate ◽  
N Application ◽  
N Application Rate

scholarly journals Grey water footprint reduction in irrigated crop production: effect of nitrogen application rate, nitrogen form, tillage practice and irrigation strategy

2018 ◽  
Vol 22 (6) ◽  
pp. 3245-3259 ◽  
Author(s):  
Abebe D. Chukalla ◽  
Maarten S. Krol ◽  
Arjen Y. Hoekstra
Keyword(s):  
Water Pollution ◽  
Crop Yield ◽  
Deficit Irrigation ◽  
Crop Production ◽  
Water Footprint ◽  
Application Rate ◽  
Inorganic N ◽  
N Application ◽  
Grey Water ◽  
N Application Rate

Abstract. Grey water footprint (WF) reduction is essential given the increasing water pollution associated with food production and the limited assimilation capacity of fresh water. Fertilizer application can contribute significantly to the grey WF as a result of nutrient leaching to groundwater and runoff to streams. The objective of this study is to explore the effect of the nitrogen application rate (from 25 to 300 kg N ha−1), nitrogen form (inorganic N or manure N), tillage practice (conventional or no-tillage) and irrigation strategy (full or deficit irrigation) on the nitrogen load to groundwater and surface water, crop yield and the N-related grey water footprint of crop production by a systematic model-based assessment. As a case study, we consider irrigated maize grown in Spain on loam soil in a semi-arid environment, whereby we simulate the 20-year period 1993–2012. The water and nitrogen balances of the soil and plant growth at the field scale were simulated with the Agricultural Policy Environmental eXtender (APEX) model. As a reference management package, we assume the use of inorganic N (nitrate), conventional tillage and full irrigation. For this reference, the grey WF at a usual N application rate of 300 kg N ha−1 (with crop yield of 11.1 t ha−1) is 1100 m3 t−1, which can be reduced by 91 % towards 95 m3 t−1 when the N application rate is reduced to 50 kg N ha−1 (with a yield of 3.7 t ha−1). The grey WF can be further reduced to 75 m3 t−1 by shifting the management package to manure N and deficit irrigation (with crop yield of 3.5 t ha−1). Although water pollution can thus be reduced dramatically, this comes together with a great yield reduction, and a much lower water productivity (larger green plus blue WF) as well. The overall (green, blue and grey) WF per tonne is found to be minimal at an N application rate of 150 kg N ha−1, with manure, no-tillage and deficit irrigation (with crop yield of 9.3 t ha−1). The paper shows that there is a trade-off between grey WF and crop yield, as well as a trade-off between reducing water pollution (grey WF) and water consumption (green and blue WF). Applying manure instead of inorganic N and deficit instead of full irrigation are measures that reduce both water pollution and water consumption with a 16 % loss in yield.

scholarly journals Grey water footprint reduction in irrigated crop production: effect of nitrogen application rate, nitrogen form, tillage practice and irrigation strategy

2017 ◽  
Author(s):  
Abebe D. Chukalla ◽  
Maarten S. Krol ◽  
Arjen Y. Hoekstra
Keyword(s):  
Water Pollution ◽  
Crop Yield ◽  
Deficit Irrigation ◽  
Crop Production ◽  
Water Footprint ◽  
Application Rate ◽  
Inorganic N ◽  
N Application ◽  
Grey Water ◽  
N Application Rate

Abstract. Grey water footprint (WF) reduction is essential given the increasing water pollution associated with food production and the limited assimilation capacity of fresh water. Fertilizer application can contribute significantly to the grey WF as a result of nutrient leaching to groundwater and runoff to streams. The objective of this study is to explore the effect of the nitrogen application rate (from 25 to 300 kg N ha−1), nitrogen form (inorganic-N or manure-N), tillage practice (conventional or no-tillage) and irrigation strategy (full or deficit irrigation) on the nitrogen load to groundwater and surface water, crop yield and the grey water footprint of crop production by a systematic model-based assessment. As a case study, we consider irrigated maize grown in Spain on loam soil in a semi-arid environment, whereby we simulate the twenty-years period 1993–2012. The water and nitrogen balances of the soil and plant growth at field scale were simulated with the APEX model. As a reference management package, we assume the use of inorganic-N (nitrate), conventional tillage and full irrigation. For this reference, the grey WF at a usual N application rate of 300 kg N ha−1 (with crop yield of 11.1 t ha−1) is 1100 m3 t−1, which can be reduced by 91 % towards 95 m3 t−1 when the N application rate is reduced to 50 kg N ha−1 (with a yield of 3.7 t ha−1). The grey WF can be further reduced to 75 m3 t−1 by shifting the management package to manure-N and deficit irrigation (with crop yield of 3.5 t ha−1). Although water pollution can thus be reduced dramatically, this comes together with a great yield reduction, and a much lower water productivity (larger green plus blue WF) as well. The overall (green, blue plus grey) WF per tonne is found to be minimal at an N application rate of 150 kg N ha−1, with manure, no-tillage and deficit irrigation (with crop yield of 9.3 t ha−1). The paper shows that there is a trade-off between grey WF and crop yield, as well as a trade-off between reducing water pollution (grey WF) and water consumption (green and blue WF). Applying manure instead of inorganic-N and deficit instead of full irrigation are measures that reduce both water pollution and water consumption with a 16 % loss in yield.

scholarly journals Foliar Zn Spraying Simultaneously Improved Concentrations and Bioavailability of Zn and Fe in Maize Grains Irrespective of Foliar Sucrose Supply

Agronomy ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 386 ◽  
Author(s):  
Haiyong Xia ◽  
Weilin Kong ◽  
Lan Wang ◽  
Yanhui Xue ◽  
Wenlong Liu ◽  
...  
Keyword(s):  
Agronomic Traits ◽  
Application Rate ◽  
Deionized Water ◽  
Control Treatment ◽  
Agricultural Practice ◽  
N Application ◽  
Application Rates ◽  
N Application Rate ◽  
Maize Grain ◽  
Sucrose Supply

Zinc (Zn) deficiency is a global nutritional problem that is reduced through agronomic biofortification. In the current study, the effects of foliar spraying of exogenous ZnSO4·7H2O (0.2% in Quzhou and 0.3% in Licheng, w/v) and/or sucrose (10.0%, w/v) on maize (Zea mays L.) agronomic traits; concentrations of Zn, iron (Fe), calcium (Ca), total phosphorus (P), phytic acid (PA) P, carbon (C), and nitrogen (N); C/N ratios; and Zn and Fe bioavailability (as evaluated by molar ratios of PA/Zn, PA × Ca/Zn, PA/Fe and PA × Ca/Fe) in maize grains were studied under field conditions for two years at two experimental locations. The results confirmed that there were no significant differences in maize agronomic traits following the various foliar treatments. Compared with the control treatment of foliar spraying with deionized water, foliar applications of Zn alone or combined with sucrose significantly increased maize grain Zn concentrations by 29.2–58.3% in Quzhou (from 18.4–19.9 to 25.2–29.6 mg/kg) and by 39.8–47.8% in Licheng (from 24.9 to 34.8–36.8 mg/kg), as well as its bioavailability. No significant differences were found between the foliar spraying of deionized water and sucrose, and between Zn-only and “sucrose + Zn” at each N application rate and across different N application rates and experimental sites. Similar results were observed for maize grain Fe concentrations and bioavailability, but the Fe concentration increased to a smaller extent than Zn. Foliar Zn spraying alone or with sucrose increased maize grain Fe concentrations by 4.7–28.4% in Quzhou (from 13.4–17.1 to 15.2–18.5 mg/kg) and by 15.4–25.0% in Licheng (from 24.0 to 27.7–30.0 mg/kg). Iron concentrations were significantly and positively correlated with Zn at each N application rate and across different N application rates and experimental locations, indicating that foliar Zn spraying facilitated the transport of endogenous Fe to maize grains. Therefore, foliar Zn spraying increased the Zn concentration and bioavailability in maize grains irrespective of foliar sucrose supply while also improving Fe concentrations and bioavailability to some extent. This is a promising agricultural practice for simultaneous Zn and Fe biofortification in maize grains, i.e., “killing two birds with one stone”.

scholarly journals Nitrous oxide emission and fertiliser nitrogen efficiency in a tropical sugarcane cropping system applied with different formulations of urea

Soil Research ◽  
2016 ◽  
Vol 54 (5) ◽  
pp. 572 ◽  
Author(s):  
Weijin Wang ◽  
Glen Park ◽  
Steven Reeves ◽  
Megan Zahmel ◽  
Marijke Heenan ◽  
...  
Keyword(s):  
Nitrous Oxide ◽  
Yield Loss ◽  
N Uptake ◽  
Management Strategies ◽  
Application Rate ◽  
Sugar Yield ◽  
N2o Emissions ◽  
N Application ◽  
N Application Rate ◽  
Coated Urea

Nitrous oxide (N2O) emissions from sugarcane cropped soils are usually high compared with those from other arable lands. Nitrogen-efficient management strategies are needed to mitigate N2O emissions from sugarcane farming whilst maintaining productivity and profitability. A year-long field experiment was conducted in wet tropical Australia to assess the efficacy of polymer-coated urea (PCU) and nitrification inhibitor (3,4-dimethylpyrazole phosphate)-coated urea (NICU). Emissions of N2O were measured using manual and automatic gas sampling chambers in combination. The nitrogen (N) release from PCU continued for >5–6 months, and lower soil NO3– contents were recorded for≥3 months in the NICU treatments compared with the conventional urea treatments. The annual cumulative N2O emissions were high, amounting to 11.4–18.2kg N2O-Nha–1. In contrast to findings in most other cropping systems, there were no significant differences in annual N2O emissions between treatments with different urea formulations and application rates (0, 100 and 140kgNha–1). Daily variation in N2O emissions at this site was driven predominantly by rainfall. Urea formulations did not significantly affect sugarcane or sugar yield at the same N application rate. Decreasing fertiliser application rate from the recommended 140kgNha–1 to 100kgNha–1 led to a decrease in sugar yield by 1.3tha–1 and 2.2tha–1 for the conventional urea and PCU treatments, respectively, but no yield loss occurred for the NICU treatment. Crop N uptake also declined at the reduced N application rate with conventional urea, but not with the PCU and NICU. These results demonstrated that substituting NICU for conventional urea may substantially decrease fertiliser N application from the normal recommended rates whilst causing no yield loss or N deficiency to the crop. Further studies are required to investigate the optimal integrated fertiliser management strategies for sugarcane production, particularly choice of products and application time and rates, in relation to site and seasonal conditions.

Yield, nutritive value and ensilage characteristics of whole-crop maize, and of the separated cob and stover components – nitrogen, harvest date and cultivar effects

2012 ◽  
Vol 151 (3) ◽  
pp. 347-367 ◽  
Author(s):  
J. P. LYNCH ◽  
P. O'KIELY ◽  
E. M. DOYLE
Keyword(s):  
Nutritive Value ◽  
Application Rate ◽  
Harvest Date ◽  
N Application ◽  
Forage Maize ◽  
Maize Cultivars ◽  
Harvest Dates ◽  
N Application Rate ◽  
Main Plot ◽  
Silage Production

SUMMARYThe objectives of the present study were to determine the effects of nitrogen (N) application rate, harvest date and maize cultivar on the yield, quality and the subsequent conservation characteristics of whole-crop, cob and stover silages. The experiment was organized in a spilt-plot design, with harvest date (15 September, 6 October and 27 October) as the main plot, and a three (maize cultivars: Tassilo, Andante and KXA 7211)×two (N application rate: 33 and 168 kg N/ha) factorial arrangement of treatments as the sub-plot, within three replicate blocks, and was conducted at Grange, Dunsany, Co. Meath, Ireland in 2009. The three harvest dates represented early, normal and late harvests, respectively, for a midland site in Ireland. Of the three maize cultivars selected, cvars Tassilo and Andante represent conventional cultivars sown by commercial livestock farmers in Ireland, while cvar KXA 7211 is categorized as a high biomass cultivar. No effect of N application rate was observed on the dry matter (DM) yield, nutritive value or ensiling characteristics of maize whole-crop or cob. Whole-crop and stover harvested on the later date had a lower digestible DM (DDM) content and the silages underwent a more restricted fermentation, compared to silages produced from herbage harvested on earlier dates. Cob silages produced from crops harvested on 15 September had lower DDM content and higher DM loss during ensiling than later harvest dates. Despite higher whole-crop DM yields, the later maturing cultivar KXA 7211 did not improve the DM yields of cob and also resulted in increased DM losses from the ensilage of cob, when compared with the other cultivars. In addition to the DM yield and nutritive value of forage maize at harvest, the subsequent fermentation profile during ensilage influences the optimum choice of cultivar and date for crop harvest in a maize silage production system.

Sign in / Sign up

Export Citation Format

Share Document