Surface engineering of cellulose film with myristic acid for high strength, self-cleaning and biodegradable packaging materials

2021 ◽  
pp. 118315
Author(s):  
Qianqian Chen ◽  
Chunyu Chang ◽  
Lina Zhang
2017 ◽  
Vol 62 (2) ◽  
pp. 19-28
Author(s):  
Onuc Cozar ◽  
◽  
Nicolae Cioica ◽  
Elena Mihaela Nagy ◽  
Constantin Coţa ◽  
...  

Author(s):  
Yuandong Jia ◽  
Kecheng Guan ◽  
Pengfei Zhang ◽  
Qin Shen ◽  
Shengyao Wang ◽  
...  

Superwetting surfaces have several applications, such as self-cleaning, anti-fouling, anti-corrosion, water harvesting, and oil–water separation, owing to their distinct structure and properties. Hydrogel-based coatings are particularly attractive owing to their...


Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2588
Author(s):  
Mansuri M. Tosif ◽  
Agnieszka Najda ◽  
Aarti Bains ◽  
Grażyna Zawiślak ◽  
Grzegorz Maj ◽  
...  

In recent years, scientists have focused on research to replace petroleum-based components plastics, in an eco-friendly and cost-effective manner, with plant-derived biopolymers offering suitable mechanical properties. Moreover, due to high environmental pollution, global warming, and the foreseen shortage of oil supplies, the quest for the formulation of biobased, non-toxic, biocompatible, and biodegradable polymer films is still emerging. Several biopolymers from varied natural resources such as starch, cellulose, gums, agar, milk, cereal, and legume proteins have been used as eco-friendly packaging materials for the substitute of non-biodegradable petroleum-based plastic-based packaging materials. Among all biopolymers, starch is an edible carbohydrate complex, composed of a linear polymer, amylose, and amylopectin. They have usually been considered as a favorite choice of material for food packaging applications due to their excellent forming ability, low cost, and environmental compatibility. Although the film prepared from bio-polymer materials improves the shelf life of commodities by protecting them against interior and exterior factors, suitable barrier properties are impossible to attain with single polymeric packaging material. Therefore, the properties of edible films can be modified based on the hydrophobic–hydrophilic qualities of biomolecules. Certain chemical modifications of starch have been performed; however, the chemical residues may impart toxicity in the food commodity. Therefore, in such cases, several plant-derived polymeric combinations could be used as an effective binary blend of the polymer to improve the mechanical and barrier properties of packaging film. Recently, scientists have shown their great interest in underutilized plant-derived mucilage to synthesize biodegradable packaging material with desirable properties. Mucilage has a great potential to produce a stable polymeric network that confines starch granules that delay the release of amylose, improving the mechanical property of films. Therefore, the proposed review article is emphasized on the utilization of a blend of source and plant-derived mucilage for the synthesis of biodegradable packaging film. Herein, the synthesis process, characterization, mechanical properties, functional properties, and application of starch and mucilage-based film are discussed in detail.


1997 ◽  
Vol 14 (6-7) ◽  
pp. 741-751 ◽  
Author(s):  
Stéphane Guilbert ◽  
Bernard Cuq ◽  
Nathalie Gontard

2010 ◽  
Vol 123-125 ◽  
pp. 351-354 ◽  
Author(s):  
Fahmida Parvin ◽  
Md. Arifur Rahman ◽  
Jahid M.M. Islam ◽  
Mubarak A. Khan ◽  
A.H.M. Saadat

Polymer films of rice starch/Polyvinyl alcohol (PVA) were prepared by casting method. Different blends were made varying the concentration of rice starch and PVA. Tensile strength (TS) and elongation at break (Eb) of the prepared films were studied. Films made up of rice starch and PVA with a ratio of 2:8 showed highest TS. 10% sugar was added with highest TS giving four composition of Starch/PVA blend in order to increase TS and Eb. Films made up of rice starch and PVA and sugar with a ratio of 1:8:1 showed highest TS and Eb and the recorded value was 14.96MPa and 637% respectively. The physico-mechanical properties of the prepared sugar incorporated films were improved by grafting with acrylic monomer with the aid of UV radiation. A formulation was prepared with monomer, methylmethacrylat in methanol, and a photo initiator. The highest TS of the grafted films were recorded and the value was 16.38 MPa. The water uptake and weight loss in both soil and water of the grafted films are lower than the non-grafted films. The prepared films were further characterized with stereo micrograph and XRD. Finally, the produced film can be used as biodegradable packaging materials for shopping and garbage bags that are very popular and environment friendly.


Membranes ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 85 ◽  
Author(s):  
Anbharasi Vanangamudi ◽  
Ludovic Dumée ◽  
Mikel Duke ◽  
Xing Yang

Controlling surface–protein interaction during wastewater treatment is the key motivation for developing functionally modified membranes. A new biocatalytic thermo-responsive poly vinylidene fluoride (PVDF)/nylon-6,6/poly(N-isopropylacrylamide)(PNIPAAm) ultrafiltration membrane was fabricated to achieve dual functionality of protein-digestion and thermo-responsive self-cleaning. The PVDF/nylon-6,6/PNIPAAm composite membranes were constructed by integrating a hydrophobic PVDF cast layer and hydrophilic nylon-6,6/PNIPAAm nanofiber layer on to which trypsin was covalently immobilized. The enzyme immobilization density on the membrane surface decreased with increasing PNIPAAm concentration, due to the decreased number of amine functional sites. An ultrafiltration study was performed using the synthetic model solution containing BSA/NaCl/CaCl2, where the PNIPAAm containing biocatalytic membranes demonstrated a combined effect of enzymatic and thermo-switchable self-cleaning. The membrane without PNIPAAm revealed superior fouling resistance and self-cleaning with an RPD of 22%, compared to membranes with 2 and 4 wt % PNIPAAm with 26% and 33% RPD, respectively, after an intermediate temperature cleaning at 50 °C, indicating that higher enzyme density offers more efficient self-cleaning than the combined effect of enzyme and PNIPAAm at low concentration. The conformational volume phase transition of PNIPAAm did not affect the stability of immobilized trypsin on membrane surfaces. Such novel surface engineering design offer a promising route to mitigate surface–protein contamination in wastewater applications.


Author(s):  
Dharam Persaud-Sharma

Magnesium and its alloys are a well-explored type of material with a multitude of applications ranging from biomedical prosthetics to non-biological tools such as automotive components. The use of magnesium and its alloys are highly desired for such applications mainly because magnesium is lightweight and possesses a high strength to weight ratio, which reduces the amount of energy required for the operation of an apparatus. In particular, the biomedical industry uses magnesium as orthopedic implants because of its strength properties that are similar to organic bone structures. Additionally, the highly corrosive or degrading nature of magnesium makes it suitable for degradable implants or medical devices. Cast magnesium alloys are also used as components in modern engines and automobiles, as magnesium's lightweight and high strength properties permit for faster automotive speeds, acceleration, and reduced energy consumption. Magnesium produces a quasi-passive hydroxide film that offers little to no inhibition of corrosion processes. Although the degree of film passivity can be increased through metallurgical techniques like alloying, the highly oxidizing nature of magnesium remains the single most important challenge to its widespread use. This chapter provides a detailed explanation of the most successful mechanisms used to control the corrosion of magnesium and its alloys and highlights the benefits and challenges for using them.


2021 ◽  
pp. 675-693
Author(s):  
Archana S. Rao ◽  
Ajay Nair ◽  
Sunil S. More ◽  
Arpita Roy ◽  
Veena S. More ◽  
...  

2020 ◽  
Vol 59 (51) ◽  
pp. 22163-22172
Author(s):  
Yitong Ding ◽  
Qian Zhou ◽  
Aichun Han ◽  
Hongxun Zhou ◽  
Rong Chen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document