A facile ionic liquid and p-toluenesulfonic acid pretreatment of herb residues: enzymatic hydrolysis and lignin valorization

2021 ◽  
pp. 129616
Author(s):  
Hao-Lin Wei ◽  
Jie Bu ◽  
Shi-Shui Zhou ◽  
Mao-Cheng Deng ◽  
Ming-Jun Zhu
Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1360
Author(s):  
Ekaterina Budenkova ◽  
Stanislav Sukhikh ◽  
Svetlana Ivanova ◽  
Olga Babich ◽  
Vyacheslav Dolganyuk ◽  
...  

Enzymatic hydrolysis of cellulose-containing raw materials, using Aspergillus niger, were studied. Filter paper, secondary cellulose-containing or starch-containing raw materials, miscanthus cellulose after alkaline or acid pretreatment, and wood chip cellulose, were used as substrates. The study focused on a wild A. niger strain, treated, or not (control), by ultraviolet (UV) irradiations for 45, 60, or 120 min (UV45, UV60, or UV120), or by UV irradiation for 120 min followed by a chemical treatment with NaN3 + ItBr for 30 min or 80 min (UV120 + CH30 or UV120 + CH80). A mixture of all the A. niger strains (MIX) was also tested. A citrate buffer, at 50 mM, wasthe most suitable for enzymatic hydrolysis. As the UV exposure time increased to 2 h, the cellulase activity of the surviving culturewas increased (r = 0.706; p < 0.05). The enzymatic activities of the obtained strains, towards miscanthus cellulose, wood chips, and filter paper, were inferior to those obtained with commercial enzymes (8.6 versus 9.1 IU), in some cases. Under stationary hydrolysis at 37 °C, pH = 4.7, the enzymatic activity of A. niger UV120 + CH30 was 24.9 IU. The enzymatic hydrolysis of secondary raw materials, using treated A. niger strains, was themost effective at 37 °C. Similarly, the most effective treatment of miscanthus cellulose and wood chips occurred at 50 °C. The maximum conversion of cellulose to glucose was observed using miscanthus cellulose (with alkaline pretreatment), and the minimum conversion was observed when using wood chips. The greatest value of cellulase activity was evidenced in the starch-containing raw materials, indicating that A. niger can ferment not only through cellulase activity, but also via an amylolytic one.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Lin Dai ◽  
Tian Huang ◽  
Kankan Jiang ◽  
Xin Zhou ◽  
Yong Xu

Abstract Background Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 °C for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization. Conclusion This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.


2013 ◽  
Vol 48 (12) ◽  
pp. 1942-1946 ◽  
Author(s):  
Li-Qun Jiang ◽  
Zhen Fang ◽  
Xing-Kang Li ◽  
Jia Luo ◽  
Suet-Pin Fan

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Wenqian Lin ◽  
Jinlai Yang ◽  
Yayue Zheng ◽  
Caoxing Huang ◽  
Qiang Yong

Abstract Background During the dilute acid pretreatment process, the resulting pseudo-lignin and lignin droplets deposited on the surface of lignocellulose and inhibit the enzymatic digestibility of cellulose in lignocellulose. However, how these lignins interact with cellulase enzymes and then affect enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid-pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by the milled wood lignin (MWL) method. All of the lignin fractions obtained from DAP-BR were used to investigate the mechanism for interaction between lignin and cellulase using surface plasmon resonance (SPR) technology to understand how they affect enzymatic hydrolysis Results The results showed that removing surface lignin significantly decreased the yield for enzymatic hydrolysis DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel inhibited its enzymatic hydrolysis, while different SL samples showed slight increases in enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus SL samples, a stronger affinity for MWL (KD = 6.8–24.7 nM) was found versus that of SL (KD = 39.4–52.6 nM) by SPR analysis. The affinity constants of all tested lignins exhibited good correlations (r > 0.6) with the effects on enzymatic digestibility of extracted DAP-BR and Avicel. Conclusions This work revealed that the surface lignin on DAP-BR is necessary for maintaining enzyme digestibility levels, and its removal has a negative impact on substrate digestibility.


2013 ◽  
Vol 275-277 ◽  
pp. 1662-1665 ◽  
Author(s):  
Qiang Li ◽  
Juan Juan Fei ◽  
Xu Ding Gu ◽  
Geng Sheng Ji ◽  
Yang Liu ◽  
...  

This study aims to establish a natural cellulosic biomass pretreatment process using ionic liquid (IL) for efficient enzymatic hydrolysis and second generation bioethanol. The IL 1-Butyl-3-methylimidazolium Chloride/FeCl3 ([Bmim]Cl/FeCl3) was selected in view of its low temperature pretreatment ability and the potential of accelerating enzymatic hydrolysis, and it could be recyclable. The yield of reducing sugars from sugarcane residue pretreated with this IL at 80 oC for 1 h reached 46.8% after being enzymatically hydrolyzed for 24 h. Sugarcane residue regenerated were hydrolyzed more easily than that treated with water. The fermentability of the hydrolyzates, obtained after enzymatic saccharification of the regenerated sugarcane residue, was transformed into bioethanol using Candida shehatae. This microbe could absorb glucose and xylose efficiently, and the ethanol production was 0.38 g/g glucose within 30 h fermentation. In conclusion, the metal ionic liquid pretreatment in low temperature shows promise as pretreatment solvent for natural biomass.


2018 ◽  
Vol 249 ◽  
pp. 1058-1061 ◽  
Author(s):  
Jiaxing Xu ◽  
Jiming Xu ◽  
Sen Zhang ◽  
Jun Xia ◽  
Xiaoyan Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document