Improvement of Enzymatic Saccharification of Cellulose-Containing Raw Materials Using Aspergillus niger

Enzymatic hydrolysis of cellulose-containing raw materials, using Aspergillus niger, were studied. Filter paper, secondary cellulose-containing or starch-containing raw materials, miscanthus cellulose after alkaline or acid pretreatment, and wood chip cellulose, were used as substrates. The study focused on a wild A. niger strain, treated, or not (control), by ultraviolet (UV) irradiations for 45, 60, or 120 min (UV45, UV60, or UV120), or by UV irradiation for 120 min followed by a chemical treatment with NaN3 + ItBr for 30 min or 80 min (UV120 + CH30 or UV120 + CH80). A mixture of all the A. niger strains (MIX) was also tested. A citrate buffer, at 50 mM, wasthe most suitable for enzymatic hydrolysis. As the UV exposure time increased to 2 h, the cellulase activity of the surviving culturewas increased (r = 0.706; p < 0.05). The enzymatic activities of the obtained strains, towards miscanthus cellulose, wood chips, and filter paper, were inferior to those obtained with commercial enzymes (8.6 versus 9.1 IU), in some cases. Under stationary hydrolysis at 37 °C, pH = 4.7, the enzymatic activity of A. niger UV120 + CH30 was 24.9 IU. The enzymatic hydrolysis of secondary raw materials, using treated A. niger strains, was themost effective at 37 °C. Similarly, the most effective treatment of miscanthus cellulose and wood chips occurred at 50 °C. The maximum conversion of cellulose to glucose was observed using miscanthus cellulose (with alkaline pretreatment), and the minimum conversion was observed when using wood chips. The greatest value of cellulase activity was evidenced in the starch-containing raw materials, indicating that A. niger can ferment not only through cellulase activity, but also via an amylolytic one.

Download Full-text

A novel recyclable furoic acid-assisted pretreatment for sugarcane bagasse biorefinery in co-production of xylooligosaccharides and glucose

Biotechnology for Biofuels ◽

10.1186/s13068-021-01884-3 ◽

2021 ◽

Vol 14 (1) ◽

Author(s):

Lin Dai ◽

Tian Huang ◽

Kankan Jiang ◽

Xin Zhou ◽

Yong Xu

Keyword(s):

Enzymatic Hydrolysis ◽

Sugarcane Bagasse ◽

Production Cost ◽

Solid Loading ◽

Fed Batch ◽

Acid Pretreatment ◽

Furoic Acid ◽

Cooling Crystallization ◽

Mineral Acids ◽

Hydrolysis Of

Abstract Background Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 °C for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization. Conclusion This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.

Download Full-text

Investigation of interaction between cellulase and residual lignin fractions in acid-pretreated bamboo residues and their effect on enzymatic digestibility

10.21203/rs.3.rs-371092/v1 ◽

2021 ◽

Author(s):

Wenqian Lin ◽

Jinlai Yang ◽

Yayue Zheng ◽

Caoxing Huang ◽

Qiang Yong

Keyword(s):

Enzymatic Hydrolysis ◽

Negative Impact ◽

Interaction Mechanism ◽

Dilute Acid Pretreatment ◽

Affinity Constant ◽

Residual Lignin ◽

Dilute Acid ◽

Enzymatic Digestibility ◽

Acid Pretreatment ◽

Hydrolysis Of

Abstract Background: During dilute acid pretreatment, pseudo lignin and lignin form droplets which deposit on the surface of lignocellulose, and further inhibit its enzymatic hydrolysis. However, how this lignin interacts with cellulase enzymes and then affects enzymatic hydrolysis is still unknown. In this work, different fractions of surface lignin (SL) obtained from dilute acid pretreated bamboo residues (DAP-BR) were extracted by various organic reagents and the residual lignin in extracted DAP-BR was obtained by milled wood lignin (MWL) method. All the obtained lignin fractions from DAP-BR were used to investigate the interaction mechanism between lignin and cellulase using surface plasmon resonance (SPR) technology in order to understand how they affect enzymatic hydrolysisResults: Results showed that removing surface lignin significantly decrease the enzymatic hydrolysis of DAP-BR from 36.5% to 18.6%. The addition of MWL samples to Avicel decreased enzymatic hydrolysis of Avicel, while different SL samples showed a slight increase to its enzymatic digestibility. Due to the higher molecular weight and hydrophobicity of MWL samples versus the SL samples, stronger affinity for MWL (KD = 6.8-24.7 nM) was found versus that of SL (KD = 39.4-52.6 nM) by SPR analysis. The affinity constant of all tested lignin had good correlations (R2>0.6) with their effects on enzymatic digestibility of extracted DAP-BR and Avicel.Conclusions: This work reveals that the surface lignin on DAP-BR is necessary towards maintaining enzyme digestibility levels, and its removal has a negative impact on the substrate’s digestibility.

Download Full-text

A novel recyclable furoic acid-assisted pretreatment for sugarcane bagasse biorefinery in co-production of xylooligosaccharides and glucose

10.21203/rs.3.rs-109722/v1 ◽

2020 ◽

Author(s):

Lin Dai ◽

Tian Huang ◽

Kankan Jiang ◽

Xin Zhou ◽

Yong Xu

Keyword(s):

Enzymatic Hydrolysis ◽

Sugarcane Bagasse ◽

Production Cost ◽

Solid Loading ◽

Fed Batch ◽

Acid Pretreatment ◽

Furoic Acid ◽

Cooling Crystallization ◽

Mineral Acids ◽

Hydrolysis Of

Abstract Background: Pretreatment is the key step for utilizing lignocellulosic biomass, which can extract cellulose from lignin and disrupt its recalcitrant crystalline structure to allow much more effective enzymatic hydrolysis; and organic acids pretreatment with dual benefic for generating xylooligosaccharides and boosting enzymatic hydrolysis has been widely used in adding values to lignocellulose materials. In this work, furoic acid, a novel recyclable organic acid as catalyst, was employed to pretreat sugarcane bagasse to recover the xylooligosaccharides fraction from hemicellulose and boost the subsequent cellulose saccharification. Results: The FA-assisted hydrolysis of sugarcane bagasse using 3% furoic acid at 170 oC for 15 min resulted in the highest xylooligosaccharides yield of 45.6%; subsequently, 83.1 g/L of glucose was harvested by a fed-batch operation with a solid loading of 15%. Overall, a total of 120 g of xylooligosaccharides and 335 g glucose could be collected from 1000 g sugarcane bagasse starting from the furoic acid pretreatment. Furthermore, furoic acid can be easily recovered by cooling crystallization.Conclusion: This work put forward a novel furoic acid pretreatment method to convert sugarcane bagasse into xylooligosaccharides and glucose, which provides a strategy that the sugar and nutraceutical industries can be used to reduce the production cost. The developed process showed that the yields of xylooligosaccharides and byproducts were controllable by shortening the reaction time; meanwhile, the recyclability of furoic acid also can potentially reduce the pretreatment cost and potentially replace the traditional mineral acids pretreatment.

Download Full-text

Effect of Subsequent Dilute Acid and Enzymatic Hydrolysis on Reducing Sugar Production from Sugarcane Bagasse and Spent Citronella Biomass

Journal of Energy ◽

10.1155/2016/8506214 ◽

2016 ◽

Vol 2016 ◽

pp. 1-12 ◽

Cited By ~ 20

Author(s):

Robinson Timung ◽

Narendra Naik Deshavath ◽

Vaibhav V. Goud ◽

Venkata V. Dasu

Keyword(s):

Enzymatic Hydrolysis ◽

Sugarcane Bagasse ◽

Crystallinity Index ◽

Sem Analysis ◽

Reducing Sugar ◽

Dilute Acid Pretreatment ◽

Crystalline Cellulose ◽

Dilute Acid ◽

Acid Pretreatment ◽

Hydrolysis Of

This work was aimed at investigating the effect of process parameters on dilute acid pretreatment and enzymatic hydrolysis of spent citronella biomass (after citronella oil extraction) and sugarcane bagasse on total reducing sugar (TRS) yield. In acid pretreatment, the parameters studied were acid concentration, temperature, and time. At the optimized condition (0.1 M H2SO4, 120°C, and 120 min), maximum TRS obtained was 452.27 mg·g−1and 487.50 mg·g−1for bagasse and citronella, respectively. Enzymatic hydrolysis of the pretreated biomass usingTrichoderma reesei26291 showed maximum TRS yield of 226.99 mg·g−1for citronella and 282.85 mg·g−1for bagasse at 10 FPU, 50°C, and 48 hr. The maximum crystallinity index (CI) of bagasse and citronella after acid pretreatment obtained from X-ray diffraction analysis was 64.41% and 56.18%, respectively. Decreased CI after enzymatic hydrolysis process to 37.28% and 34.16% for bagasse and citronella, respectively, revealed effective conversion of crystalline cellulose to glucose. SEM analysis of the untreated and treated biomass revealed significant hydrolysis of holocellulose and disruption of lignin.

Download Full-text

Effects of Biosurfactants on Enzymatic Saccharification and Fermentation of Pretreated Softwood

Molecules ◽

10.3390/molecules25163559 ◽

2020 ◽

Vol 25 (16) ◽

pp. 3559 ◽

Cited By ~ 1

Author(s):

Alfredo Oliva-Taravilla ◽

Cristhian Carrasco ◽

Leif J. Jönsson ◽

Carlos Martín

Keyword(s):

Saccharomyces Cerevisiae ◽

Pseudomonas Aeruginosa ◽

Enzymatic Hydrolysis ◽

Enzymatic Saccharification ◽

Horse Chestnut ◽

Yeast Growth ◽

Cellulose Conversion ◽

Enzymatic Hydrolysis Of Cellulose ◽

Hydrolysis Of Cellulose ◽

Hydrolysis Of

The enzymatic hydrolysis of cellulose is inhibited by non-productive adsorption of cellulases to lignin, and that is particularly problematic with lignin-rich materials such as softwood. Although conventional surfactants alleviate non-productive adsorption, using biosurfactants in softwood hydrolysis has not been reported. In this study, the effects of four biosurfactants, namely horse-chestnut escin, Pseudomonas aeruginosa rhamnolipid, and saponins from red and white quinoa varieties, on the enzymatic saccharification of steam-pretreated spruce were investigated. The used biosurfactants improved hydrolysis, and the best-performing one was escin, which led to cellulose conversions above 90%, decreased by around two-thirds lignin inhibition of Avicel hydrolysis, and improved hydrolysis of pretreated spruce by 24%. Red quinoa saponins (RQS) addition resulted in cellulose conversions above 80%, which was around 16% higher than without biosurfactants, and it was more effective than adding rhamnolipid or white quinoa saponins. Cellulose conversion improved with the increase in RQS addition up to 6 g/100 g biomass, but no significant changes were observed above that dosage. Although saponins are known to inhibit yeast growth, no inhibition of Saccharomyces cerevisiae fermentation of hydrolysates produced with RQS addition was detected. This study shows the potential of biosurfactants for enhancing the enzymatic hydrolysis of steam-pretreated softwood.

Download Full-text