ZnO films with a thickness of ~200 nm were deposited on SiO2/Si substrates as the seed layer. Then Zn(NO3)2-6H2O and C6H12N4 containing different concentrations of Eu(NO3)2-6H2O or In(NO3)2-6H2O were used as precursors, and a hydrothermal process was used to synthesize pure ZnO as well as Eu-doped and In-doped ZnO nanowires at different synthesis temperatures. X-ray diffraction (XRD) was used to analyze the crystallization properties of the pure ZnO and the Eu-doped and In-doped ZnO nanowires, and field emission scanning electronic microscopy (FESEM) was used to analyze their surface morphologies. The important novelty in our approach is that the ZnO-based nanowires with different concentrations of Eu3+ and In3+ ions could be easily synthesized using a hydrothermal process. In addition, the effect of different concentrations of Eu3+ and In3+ ions on the physical and optical properties of ZnO-based nanowires was well investigated. FESEM observations found that the undoped ZnO nanowires could be grown at 100 °C. The third novelty is that we could synthesize the Eu-doped and In-doped ZnO nanowires at temperatures lower than 100 °C. The temperatures required to grow the Eu-doped and In-doped ZnO nanowires decreased with increasing concentrations of Eu3+ and In3+ ions. XRD patterns showed that with the addition of Eu3+ (In3+), the diffraction intensity of the (002) peak slightly increased with the concentration of Eu3+ (In3+) ions and reached a maximum at 3 (0.4) at%. We show that the concentrations of Eu3+ and In3+ ions have considerable effects on the synthesis temperatures and photoluminescence properties of Eu3+-doped and In3+-doped ZnO nanowires.
Using Different Ions in the Hydrothermal Method to Enhance the Photoluminescence Properties of Synthesized ZnO-Based Nanowires