Effect of thermal pre-treatment on co-digestion of duckweed ( Lemna gibba ) and waste activated sludge on biogas production

Chemosphere ◽  
2017 ◽  
Vol 174 ◽  
pp. 754-763 ◽  
Author(s):  
Rubia Zahid Gaur ◽  
Abid Ali Khan ◽  
Surindra Suthar
Keyword(s):  
Activated Sludge ◽  
Biogas Production ◽  
Lemna Gibba ◽  
Waste Activated Sludge ◽  
Pre Treatment

scholarly journals The Influence of Low-Temperature Disintegration on the Co-Fermentation Process of Distillation Residue and Waste-Activated Sludge

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 482
Author(s):  
Anna Remiszewska-Skwarek ◽  
Ryszard Wierzchnicki ◽  
Otton K. Roubinek ◽  
Archana Kasinath ◽  
Alicja Jeżewska ◽  
...  
Keyword(s):  
Low Temperature ◽  
Activated Sludge ◽  
Fermentation Process ◽  
Biogas Production ◽  
Correlation Coefficients ◽  
Gompertz Model ◽  
Waste Activated Sludge ◽  
Distillation Residue ◽  
Accumulation Curves ◽  
Pre Treatment

Innovative low-temperature disintegration (process temperature 55 °C and oxygen concentration 0.2 mg/dm3) can be an economically rational technology to intensifying energy production from renewable sources. The proposed process can achieve a degree of disintegration—under optimal conditions—of about 50%, which is excellent when compared with other methods of feed pre-treatment. The low-temperature disintegration of distillation residue and waste-activated sludge before the co-fermentation process increased biogas production by 30% and methane production by 65% (over a 26 d duration). The obtained results confirm that the low-temperature disintegration method can be effectively used to pre-prepare this type of feed. At the same time, it was discovered that the Gompertz model can be used to mathematically describe the biogas accumulation curves in the methane co-fermentation processes of the tested feeds (the correlation coefficients were higher than 0.98).

scholarly journals Pre-treatment of thickened waste activated sludge (TWAS) for enhanced biogas production via the application of a novel radial horn sonication technology

2017 ◽  
Vol 75 (9) ◽  
pp. 2179-2193 ◽  
Author(s):  
Sri Suhartini ◽  
Lynsey Melville ◽  
Tony Amato
Keyword(s):  
Activated Sludge ◽  
Biogas Production ◽  
Applied Pressure ◽  
Low Frequency ◽  
Waste Activated Sludge ◽  
Biochemical Methane Potential ◽  
Experimental Conditions ◽  
Working Volume ◽  
Methane Potential ◽  
Pre Treatment

The efficacy of sonication as a pre-treatment to anaerobic digestion (AD) was assessed using thickened waste activated sludge (TWAS). Efficiency was measured in relation to solubilisation, dewaterability, and AD performance. Eighteen experimental conditions were evaluated at low frequency (20 kHz), duration (2–10 s), amplitude (∼8–12 μm) and applied pressure (0.5–3.0 barg), using a sonix™ patented titanium sonoprobe capable of delivering an instantaneous power of ∼6 kW provided by Doosan Enpure Ltd (DEL). An optimised experimental protocol was used as a pre-treatment for biochemical methane potential (BMP) testing and semi-continuous trials. Four digesters, with a 2-L working volume were operated mesophilically (37 ± 0.5 °C) over 22 days. The results showed that the sonix™ technology delivers effective sonication at very short retention times compared to conventional system. Results demonstrate that the technology effectively disrupts the floc structures and filaments within the TWAS, causing an increase in solubilisation and fine readily digestible material. Both BMP tests and semi-continuous trials demonstrated that sonicated TWAS gave higher biodegradability and methane potential compared to untreated TWAS. Partial-stream sonication (30:70 sonicated to untreated TWAS) resulted in a proportionate increase in biogas production illustrating the benefits of full-stream sonication.

scholarly journals Nitrogen in the Process of Waste Activated Sludge Anaerobic Digestion

2014 ◽  
Vol 40 (2) ◽  
pp. 123-136 ◽  
Author(s):  
Jan Suschka ◽  
Klaudiusz Grübel
Keyword(s):  
Anaerobic Digestion ◽  
Activated Sludge ◽  
Biogas Production ◽  
Sewage Treatment ◽  
Anaerobic Treatment ◽  
Waste Activated Sludge ◽  
Sludge Digestion ◽  
Sludge Pretreatment ◽  
Negative Side Effects ◽  
Pre Treatment

Abstract Primary or secondary sewage sludge in medium and large WWTP are most often processed by anaerobic digestion, as a method of conditioning, sludge quantity minimization and biogas production. With the aim to achieve the best results of sludge processing several modifications of technologies were suggested, investigated and introduced in the full technical scale. Various sludge pretreatment technologies before anaerobic treatment have been widely investigated and partially introduced. Obviously, there are always some limitations and some negative side effects. Selected aspects have been presented and discussed. The problem of nitrogen has been highlighted on the basis of the carried out investigations. The single and two step - mesophilic and thermophilic - anaerobic waste activated sludge digestion processes, preceded by preliminary hydrolysis were investigated. The aim of lab-scale experiments was pre-treatment of the sludge by means of low intensive alkaline and hydrodynamic disintegration. Depending on the pretreatment technologies and the digestion temperature large ammonia concentrations, up to 1800 mg NH4/dm3 have been measured. Return of the sludge liquor to the main sewage treatment line means additional nitrogen removal costs. Possible solutions are discussed.

scholarly journals Investigation of Heavy Metal Effects on the Anaerobic Co-Digestion Process of Waste Activated Sludge and Septic Tank Sludge

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Quang-Minh Nguyen ◽  
Duy-Cam Bui ◽  
Thao Phuong ◽  
Van-Huong Doan ◽  
Thi-Nham Nguyen ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Sludge ◽  
Removal Efficiency ◽  
Biogas Production ◽  
Cod Removal ◽  
Septic Tank ◽  
Waste Activated Sludge ◽  
Digestion Process ◽  
Cod Removal Efficiency

The effect of copper, zinc, chromium, and lead on the anaerobic co-digestion of waste activated sludge and septic tank sludge in Hanoi was studied in the fermentation tests by investigating the substrate degradation, biogas production, and process stability at the mesophilic fermentation. The tested heavy metals were in a range of concentrations between 19 and 80 ppm. After the anaerobic tests, the TS, VS, and COD removal efficiency was 4.12%, 9.01%, and 23.78% for the Cu(II) added sample. Similarly, the efficiencies of the Zn(II) sample were 1.71%, 13.87%, and 16.1% and Cr(VI) efficiencies were 15.28%, 6.6%, and 18.65%, while the TS, VS, and COD removal efficiency of the Pb(II) added sample was recorded at 16.1%, 17.66%, and 16.03% at the concentration of 80 ppm, respectively. Therefore, the biogas yield also decreased by 36.33%, 31.64%, 31.64%, and 30.60% for Cu(II), Zn(II), Cr(VI), and Pb(II) at the concentration of 80 ppm, compared to the raw sample, respectively. These results indicated that Cu(II) had more inhibiting effect on the anaerobic digestion of the sludge mixture than Zn(II), Cr(VI), and Pb(II). The relative toxicity of these heavy metals to the co-digestion process was as follows: Cu (the most toxic) > Zn > Cr > Pb (the least toxic). The anaerobic co-digestion process was inhibited at high heavy metal concentration, which resulted in decreased removal of organic substances and produced biogas.

Anaerobic co-digestion of winery waste and waste activated sludge: assessment of process feasibility

2013 ◽  
Vol 69 (2) ◽  
pp. 269-277 ◽  
Author(s):  
C. Da Ros ◽  
C. Cavinato ◽  
F. Cecchi ◽  
D. Bolzonella
Keyword(s):  
Activated Sludge ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Waste Activated Sludge ◽  
Organic Loading ◽  
Operational Conditions ◽  
Loading Rates ◽  
Thermophilic Conditions ◽  
Soluble Chemical Oxygen Demand

In this study the anaerobic co-digestion of wine lees together with waste activated sludge in mesophilic and thermophilic conditions was tested at pilot scale. Three organic loading rates (OLRs 2.8, 3.3 and 4.5 kgCOD/m3d) and hydraulic retention times (HRTs 21, 19 and 16 days) were applied to the reactors, in order to evaluate the best operational conditions for the maximization of the biogas yields. The addition of lee to sludge determined a higher biogas production: the best yield obtained was 0.40 Nm3biogas/kgCODfed. Because of the high presence of soluble chemical oxygen demand (COD) and polyphenols in wine lees, the best results in terms of yields and process stability were obtained when applying the lowest of the three organic loading rates tested together with mesophilic conditions.

Sign in / Sign up

Export Citation Format

Share Document