Effects of the number of fatigue cycles on the impact behavior of glass fiber/epoxy composite tubes

2017 ◽  
Vol 123 ◽  
pp. 55-63 ◽  
Author(s):  
Memduh Kara ◽  
Muhammed Kırıcı
Keyword(s):  
Glass Fiber ◽  
Epoxy Composite ◽  
Impact Behavior ◽  
Composite Tubes ◽  
The Impact

scholarly journals Effect of extreme cold temperatures on quasi-static indentation and impact behavior of woven carbon fiber epoxy composite sandwich panels with nomex honeycomb core

2021 ◽  
pp. 109963622199387
Author(s):  
Mathilde Jean-St-Laurent ◽  
Marie-Laure Dano ◽  
Marie-Josée Potvin
Keyword(s):  
Epoxy Composite ◽  
Impact Behavior ◽  
Effect Of Temperature ◽  
Cold Temperatures ◽  
Composite Sandwich Panels ◽  
Composite Sandwich ◽  
Static Indentation ◽  
Nomex Honeycomb ◽  
Extreme Cold ◽  
The Impact

The effect of extreme cold temperatures on the quasi-static indentation and the low velocity impact behavior of woven carbon/epoxy composite sandwich panels with Nomex honeycomb core was investigated. Impact tests were performed at room temperature, –70°C, and –150°C. Two sizes of hemispherical impactor were used combined to three different impactor masses. All the impact tests were performed at the same initial impact velocity. The effect of temperature on the impact behavior is investigated by studying the load history, load-displacement curves and transmitted energy as a function of time curves. Impact damage induced at various temperatures was studied using different non-destructive and destructive techniques. Globally, more damages are induced with impact temperature decreasing. The results also show that the effect of temperature on the impact behavior is function of the impactor size.

IMPACT RESISTANCE PROPERTIES OF KEVLAR/GLASS FIBER HYBRID COMPOSITE LAMINATES

2015 ◽  
Vol 76 (3) ◽  
Author(s):  
Norazean Shaari ◽  
Aidah Jumahat ◽  
M. Khafiz M. Razif
Keyword(s):  
Glass Fiber ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Impact Damage ◽  
Impact Resistance ◽  
Impact Behavior ◽  
Slight Reduction ◽  
Depth Of Penetration ◽  
Damage Degree ◽  
The Impact

In this paper, the impact behavior of Kevlar/glass fiber hybrid composite laminates was investigated by performing the drop weight impact test (ASTM D7136). Composite laminates were fabricated using vacuum bagging process with an epoxy matrix reinforced with twill Kevlar woven fiber and plain glass woven fiber. Four different types of composite laminates with different ratios of Kevlar to glass fiber (0:100, 20:80, 50:50 and 100:0) were manufactured. The effect of Kevlar/glass fiber content on the impact damage behavior was studied at 43J nominal impact energy. Results indicated that hybridization of Kevlar fiber to glass fiber improved the load carrying capability, energy absorbed and damage degree of composite laminates with a slight reduction in deflection. These results were further supported through the damage pattern analysis, depth of penetration and X-ray evaluation tests. Based on literature work, studies that have been done to investigate the impact behaviour of woven Kevlar/glass fiber hybrid composite laminates are very limited. Therefore, this research concentrates on the effect of Kevlar on the impact resistance properties of woven glass fibre reinforced polymer composites.

scholarly journals Cyclic Relaxation, Impact Properties and Fracture Toughness of Carbon and Glass Fiber Reinforced Composite Laminates

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7412
Author(s):  
Mohammed Y. Abdellah ◽  
Mohamed K. Hassan ◽  
Ahmed F. Mohamed ◽  
Ahmed H. Backar
Keyword(s):  
Fracture Toughness ◽  
Glass Fiber ◽  
Composite Laminates ◽  
Fiber Composite ◽  
Impact Behavior ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced ◽  
Glass Fiber Composite ◽  
Cyclic Relaxation ◽  
The Impact

In this paper, the mechanical properties of fiber-reinforced epoxy laminates are experimentally tested. The relaxation behavior of carbon and glass fiber composite laminates is investigated at room temperature. In addition, the impact strength under drop-weight loading is measured. The hand lay-up technique is used to fabricate composite laminates with woven 8-ply carbon and glass fiber reinforced epoxy. Tensile tests, cyclic relaxation tests and drop weight impacts are carried out on the carbon and glass fiber-reinforced epoxy laminates. The surface release energy GIC and the related fracture toughness KIC are important characteristic properties and are therefore measured experimentally using a standard test on centre-cracked specimens. The results show that carbon fiber-reinforced epoxy laminates with high tensile strength give high cyclic relaxation performance, better than the specimens with glass fiber composite laminates. This is due to the higher strength and stiffness of carbon fiber-reinforced epoxy with 600 MPa compared to glass fiber-reinforced epoxy with 200 MPa. While glass fibers show better impact behavior than carbon fibers at impact energies between 1.9 and 2.7 J, this is due to the large amount of epoxy resin in the case of glass fiber composite laminates, while the impact behavior is different at impact energies between 2.7 and 3.4 J. The fracture toughness KIC is measured to be 192 and 31 MPa √m and the surface energy GIC is measured to be 540.6 and 31.1 kJ/m2 for carbon and glass fiber-reinforced epoxy laminates, respectively.

Can ultrasonic parameters affect the impact and water barrier properties of nano-clay filled glass fiber/polyester composites?

2020 ◽  
pp. 152808372096073
Author(s):  
AA Megahed ◽  
MA Agwa ◽  
M Megahed
Keyword(s):  
Glass Fiber ◽  
Impact Resistance ◽  
Impact Behavior ◽  
Water Barrier ◽  
Nano Clay ◽  
Polyester Matrix ◽  
Ultrasonic Parameters ◽  
Polyester Composites ◽  
Sonication Parameters ◽  
The Impact

Good dispersion of the nanoparticles into the polymer is considered a critical issue, as it can provide higher strength and stiffness while poor dispersion is seen to decrease those properties. In the present work, the effect of three ultrasonic parameters (amplitude, time and cycle of sonication) on sonication technique for dispersing 1 wt.% nano-clay in polyester matrix was investigated. To disperse the nano-clay into the polyester matrix, sonication frequencies of 40% and 80%, sonication times of 0.5, 1 and 2 hours and pulse of 0.5 and 1 cycle were used. The effect of these ultrasonication parameters on water barrier and impact behavior of unfilled and filled glass fiber (GF)/polyester with nano-clay under dry, distilled and seawater conditions was studied. Results showed that, water absorption of nano-filled composites dispersed with all sonication parameters is lower than that of unfilled glass fiber/polyester composites immersed in distilled and seawater. Nano-clay filled GF/polyester composites showed an improvement in impact resistance under dry, distilled and seawater conditions with all sonication parameters. Among the used sonication parameters; time of 2 hours, amplitude of 40% and 0.5 cycle was found as the best parameter which resulted in the maximum enhancement in impact resistance, due to the addition of nano-clay to GF/polyester, of 8.2%, 14% and 19.6% under dry, distilled water and seawater conditions, respectively. Nonlinear minimization approach was exploited using MAPLE commercial software in order to find the suitable fit to the models of Fick and Langmuir. Diffusion coefficients for different sonication times were computed.

scholarly journals Analysis of Cryogenic Impact Properties for a Glass-Fiber-Reinforced Dicyclopentadiene with a Different Amount of Decelerator Solution

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3246
Author(s):  
Ji Ho Jeon ◽  
Woo Il Lee ◽  
Jong Min Choi ◽  
Sung Woong Choi
Keyword(s):  
Glass Fiber ◽  
Weight Fraction ◽  
Expansion Ratio ◽  
Impact Behavior ◽  
Fiber Reinforced ◽  
Impact Properties ◽  
Chemical Corrosion ◽  
Low Viscosity ◽  
Glass Fiber Reinforced ◽  
The Impact

Composites using dicyclopentadiene (DCPD) as a matrix have gained significant popularity owing to their excellent impact and chemical corrosion resistance. In the present study, experiments addressing the impact behavior of glass-fiber-reinforced DCPD were conducted to quantitatively evaluate its impact properties. The glass-fiber-reinforced polydicyclopentadiene composite utilized in impact tests was manufactured using structural reaction injection molding (S-RIM) because of its fast curing characteristics and low viscosity. The impact properties of the glass-fiber-reinforced DCPD (GF/DCPD) were quantitatively evaluated by varying its fiber content and decelerator solution. The impact properties of neat DCPD and GF/DCPD composites were examined with different amounts of decelerator solution under various temperatures from room temperature to cryogenic temperature to observe the ductile-to-brittle transition temperature (DBTT). With an increase in the fiber weight fraction of the GF/DCPD composite, the effect of the DBTT significantly decreased. However, the decreasing rate retarded as the weight fraction of the GF increased. The decreased DBTT with the addition of GF in the GF/DCPD can be attributed to the differences in the thermal expansion ratio and the interfacial force between neat DCPD and the fiber. A fractograph analysis demonstrates that the effect of the brittle (smooth) surface resulted in a lower impact absorbed energy when the temperature decreased, along with the increased amount of the decelerator.

Sign in / Sign up

Export Citation Format

Share Document