The effect of heat-transfer passages on the effective thermal conductivity of high filler loading composite materials

2007 ◽  
Vol 67 (6) ◽  
pp. 1035-1040 ◽  
Author(s):  
H ZHOU ◽  
S ZHANG ◽  
M YANG
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Composite Materials ◽  
Effective Thermal Conductivity ◽  
Filler Loading ◽  
High Filler Loading

scholarly journals Improved Heat Transfer in Guar Gel Composites Reinforced with Randomly Distributed Glass Microspheres

2021 ◽  
Author(s):  
Ruifeng CAO ◽  
Taotao WANG ◽  
Yuxuan ZHANG ◽  
Hui WANG
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Particle Size ◽  
Composite Materials ◽  
Effective Thermal Conductivity ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Glass Microspheres ◽  
Particle Volume ◽  
Number Of Particles

Improved heat transfer in composites consisting of guar gel matrix and randomly distributed glass microspheres is extensively studied to predict the effective thermal conductivity of composites using the finite element method. In the study, the proper and probabilistic three-dimensional random distribution of microspheres in the continuous matrix is automatically generated by a simple and efficient random sequential adsorption algorithm which is developed by considering the correlation of three factors including particle size, number of particles, and particle volume fraction controlling the geometric configuration of random packing. Then the dependences of the effective thermal conductivity of composite materials on some important factors are investigated numerically, including the particle volume fraction, the particle spatial distribution, the number of particles, the nonuniformity of particle size, the particle dispersion morphology and the thermal conductivity contrast between particle and matrix. The related numerical results are compared with theoretical predictions and available experimental results to assess the validity of the numerical model. These results can provide good guidance for the design of advanced microsphere reinforced composite materials.

Enhanced Effective Thermal Conductivity of Composite Materials by Incorporating Constructal Fillers

2021 ◽  
Vol 42 (7) ◽  
Author(s):  
Xiaojian Wang ◽  
Xiaohu Niu ◽  
Wensheng Kang ◽  
Xiaoxue Wang ◽  
Liangbi Wang
Keyword(s):  
Thermal Conductivity ◽  
Composite Materials ◽  
Effective Thermal Conductivity

scholarly journals The effective thermal conductivity of crud and heat transfer from crud-coated PWR fuel

2011 ◽  
Vol 241 (3) ◽  
pp. 792-798 ◽  
Author(s):  
N. Cinosi ◽  
I. Haq ◽  
M. Bluck ◽  
S.P. Walker
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Effective Thermal Conductivity

Figure of Merit-Based Optimization Approach of Phase Change Material-based Composites for Portable Electronics Using Simplified Model

2021 ◽  
Author(s):  
Ayushman Singh ◽  
Srikanth Rangarajan ◽  
Leila Choobineh ◽  
Bahgat Sammakia
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Phase Change ◽  
Effective Thermal Conductivity ◽  
Phase Change Material ◽  
Figure Of Merit ◽  
Volume Fraction ◽  
Simplified Model ◽  
Transient Temperature ◽  
Change Material

Abstract This work presents an approach to optimally designing a composite with thermal conductivity enhancers (TCEs) infiltrated with phase change material (PCM) based on figure of merit (FOM) for thermal management of portable electronic devices. The FOM defines the balance between effective thermal conductivity and energy storage capacity. In present study, TCEs are in the form of a honeycomb structure. TCEs are often used in conjunction with PCM to enhance the conductivity of the composite medium. Under constrained composite volume, the higher volume fraction of TCEs improves the effective thermal conductivity of the composite, while it reduces the amount of latent heat storage simultaneously. The present work arrives at the optimal design of composite for electronic cooling by maximizing the FOM to resolve the stated trade-off. In this study, the total volume of the composite and the interfacial heat transfer area between the PCM and TCE are constrained for all design points. A benchmarked two-dimensional direct CFD model was employed to investigate the thermal performance of the PCM and TCE composite. Furthermore, assuming conduction-dominated heat transfer in the composite, a simplified effective numerical model that solves the single energy equation with the effective properties of the PCM and TCE has been developed. The effective thermal conductivity of the composite is obtained by minimizing the error between the transient temperature gradient of direct and simplified model by iteratively varying the effective thermal conductivity. The FOM is maximized to find the optimal volume fraction for the present design.

scholarly journals Effective thermal conductivity of the hair coat of Holstein cows in a tropical environment

2009 ◽  
Vol 38 (11) ◽  
pp. 2218-2223 ◽  
Author(s):  
Alex Sandro Campos Maia ◽  
Roberto Gomes da Silva ◽  
João Batista Freire de Souza Junior ◽  
Rosiane Batista da Silva ◽  
Hérica Girlane Tertulino Domingos
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Free Convection ◽  
Effective Thermal Conductivity ◽  
Tropical Environment ◽  
Holstein Cows ◽  
Hair Coat ◽  
Black And White ◽  
Low K

The objective of the present study was to assess the effective thermal conductivity of the hair coat (k ef, mW.m-1.K-1) of Holstein cows in a tropical environment, as related to conduction and radiation in the absence of free convection. The average k ef was 49.72 mW.m-1.K-1, about twice the conductivity of the air (26 mW.m-1.K-1) and much less than that of the hair fibres (260 mW.m-1.K-1). The low k ef values were attributed mainly to the small cross area of individual hairs, ρef/ρf (17.2% and 21.3% for black and white hairs, respectively). White coats were denser, with longer hairs and significantly higher k ef (53.15 mW.m-1.K-1) than that of the black hairs (49.25 mW.m-1.K-1). The heritability coefficient of the effective thermal conductivity was calculated as h²=0.18 the possibility was discussed of selecting cattle for increased heat transfer through the hair coat.

Study on Heat Transfer and Corrosion Resistance of Anodized Aluminum Alloy in Gallium-Based Liquid Metal

2019 ◽  
Vol 141 (1) ◽  
Author(s):  
Yuntao Cui ◽  
Yujie Ding ◽  
Shuo Xu ◽  
Yushu Wang ◽  
Wei Rao ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Liquid Metal ◽  
Effective Thermal Conductivity ◽  
Anodic Oxidation ◽  
Convective Heat Transfer Coefficient ◽  
Total Thickness ◽  
Anodized Aluminum

Gallium-based liquid metal (LM) inherits excellent thermophysical properties and pollution-free characteristics. However, it has long been a fatal problem that LM would cause serious corrosion and embrittlement on the classical substrate made of aluminum alloys in constructing chip cooling device. Here, anodic oxidation treatment was introduced on processing the aluminum alloy aiming to tackle the corrosion issues. The prepared anodic oxidation aluminum (AAO) coatings were composed of nanopore layers and barrier layers on a high-purity alumina matrix that were manufactured electrochemically. According to the measurement, the effective thermal conductivity of the anodized aluminum alloy increases with the total thickness of sample increasing. When the total thickness L exceeds 5 × 10−3 m, effects of the porous media on effective thermal conductivity are negligible via model simulation and calculation. It was experimentally found that aluminum alloy after surface anodization treatment presented excellent corrosion resistance and outstanding heat transfer performance even when exposed in eutectic gallium–indium (E-GaIn) LM over 200 °C. The convective heat transfer coefficient of LM for anodized sample reached the peak when the heat load is 33.3 W.

Effective Thermal Conductivity of Submicron Powders: A Numerical Study

2016 ◽  
Vol 846 ◽  
pp. 500-505
Author(s):  
Wei Jing Dai ◽  
Yi Xiang Gan ◽  
Dorian Hanaor
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Effective Thermal Conductivity ◽  
Granular Materials ◽  
Gas Phase ◽  
Numerical Study ◽  
Transfer Model ◽  
Size Of Particles ◽  
Contact Unit

Effective thermal conductivity is an important property of granular materials in engineering applications and industrial processes, including the blending and mixing of powders, sintering of ceramics and refractory metals, and electrochemical interactions in fuel cells and Li-ion batteries. The thermo-mechanical properties of granular materials with macroscopic particle sizes (above 1 mm) have been investigated experimentally and theoretically, but knowledge remains limited for materials consisting of micro/nanosized grains. In this work we study the effective thermal conductivity of micro/nanopowders under varying conditions of mechanical stress and gas pressure via the discrete thermal resistance method. In this proposed method, a unit cell of contact structure is regarded as one thermal resistor. Thermal transport between two contacting particles and through the gas phase (including conduction in the gas phase and heat transfer of solid-gas interfaces) are the main mechanisms. Due to the small size of particles, the gas phase is limited to a small volume and a simplified gas heat transfer model is applied considering the Knudsen number. During loading, changes in the gas volume and the contact area between particles are simulated by the finite element method. The thermal resistance of one contact unit is calculated through the combination of the heat transfer mechanisms. A simplified relationship between effective thermal conductivity and loading pressure can be obtained by integrating the contact units of the compacted powders.

scholarly journals Measurement of Thermal Conductivity along the Radial Direction in a Vertical Cylindrical Packed Bed

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Swaren Bedarkar ◽  
Nurni Neelakantan Viswanathan ◽  
Nidambur Bharatha Ballal
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Effective Thermal Conductivity ◽  
Crucial Role ◽  
Iron Ore ◽  
Radial Direction ◽  
Thermal Response ◽  
Packed Bed ◽  
Lumped Parameter ◽  
Scientists And Engineers

Heat transfer in packed beds and their thermal response have been of great interest for scientists and engineers for the last several years, since they play a crucial role in determining design and operation of reactors. Heat transfer of a packed bed is characterised through lumped parameter, namely, effective thermal conductivity. In the present studies, experiments were performed to investigate the thermal conductivity of a packed bed in radial direction. The packed bed was formed using iron ore particles. To determine the effective thermal conductivity a new transient methodology is proposed. The results obtained were compared with the models proposed by ZBS and Kunii and Smith.

Sign in / Sign up

Export Citation Format

Share Document