On the mixed mode I/II fracture properties of jute fiber-reinforced concrete

2017 ◽  
Vol 148 ◽  
pp. 512-520 ◽  
Author(s):  
A. Razmi ◽  
M.M. Mirsayar
Keyword(s):  
Reinforced Concrete ◽  
Mixed Mode ◽  
Fiber Reinforced Concrete ◽  
Jute Fiber ◽  
Mode I ◽  
Fiber Reinforced ◽  
Fracture Properties

The influence of natural and synthetic fibers on mixed mode I/II fracture behavior of cement concrete materials

2019 ◽  
Vol 46 (12) ◽  
pp. 1081-1089 ◽  
Author(s):  
Hossein Karimzadeh ◽  
Ali Razmi ◽  
Reza Imaninasab ◽  
Afshin Esminejad
Keyword(s):  
Fracture Toughness ◽  
Reinforced Concrete ◽  
Mixed Mode ◽  
Fiber Reinforced Concrete ◽  
Bending Test ◽  
Synthetic Fiber ◽  
Mode I ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Natural And Synthetic

This paper evaluated mixed mode I/II fracture toughness of fiber-reinforced concrete using cracked semi-circular bend (SCB) specimens subjected to three-point bending test. Additionally, a comparison was made between the experimental results and the estimations made by different theoretical criteria. Natural and synthetic fibers at various concentrations were used in this study. After producing cracks in SCB specimens at different inclination angles to induce different mixed mode loading conditions (from pure mode I to II), the fracture toughness of SCB specimens was determined. Furthermore, the compressive, splitting tensile, and flexural strength of natural and synthetic fiber-reinforced concrete were measured after 7 and 28 days of curing. While there is an increase in the aforementioned strengths with fiber content increase, 0.3% was found to be the optimum percentage regarding fracture toughness for both fibers. Also, the comparison between the experimental and theoretical results showed that generalized maximum tangential stress criterion estimated the experimental data satisfactorily.

scholarly journals SCOPE OF IMPROVING MECHANICAL CHARACTERISTICS OF CONCRETE USING NATURAL FIBER AS A REINFORCING MATERIAL

2020 ◽  
Vol 32 (2) ◽  
Author(s):  
Sristi Das Gupta ◽  
MD Shahnewaz Aftab ◽  
Hasan Mohammod Zakaria ◽  
Chaity Karmakar
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Synthetic Fiber ◽  
Jute Fiber ◽  
Fiber Reinforced ◽  
Plastic Shrinkage ◽  
Shrinkage Cracks ◽  
Reinforcing Material

Using natural (Jute) fiber in concrete as a reinforcing material can not only augment the concrete strength but also restrict the use of synthetic fiber which is environmentally detrimental. To achieve this goal, this study evaluated compressive strength, tensile strength and plastic shrinkage of concrete incorporating ‘Natural (Jute)’ fiber of different length (15 mm and 25 mm) with various mix proportions of 0.10%, 0.2%, 0.3% and 0.4% respectively by volume of concrete. Concrete is vulnerable to grow shrinkage cracks because of high evaporation rate in dry and windy conditions. Incorporating of fibers could abate development of this crack. The large length (25 mm) and higher content ( 0.3%) of reinforcing materials (jute fiber) result to the lowering of mechanical properties of JFRC compare to plain concrete. But in the incorporation of short (15 mm) and low fiber content ( 0.3%), enhances the mechanical properties of the same JFRC. Inclusion of 0.3% (15 mm length) fiber gave maximum enhancement of both concrete compressive and tensile strength by 12.4% and 58% respectively compared to the non-fiber reinforced concrete. A drastic suppression of crack occurrence and area of crack between non-fiber reinforced concrete and fiber reinforced concretes was attained. Experimental results of incorporating 0.1–0.4% fiber with 15 mm length in concrete revealed that plastic shrinkage cracks were decreased by 75–99% in contrast to non-fiber reinforced concrete. Therefore, it is concluded that the incorporation of jute fiber in making FRC composite would be one of the favorable methods to enhance the performance of concrete.

Soft computing approaches for comparative prediction of the mechanical properties of jute fiber reinforced concrete

2020 ◽  
Vol 149 ◽  
pp. 102887
Author(s):  
N. Sultana ◽  
S.M. Zakir Hossain ◽  
Md Shah Alam ◽  
M.S. Islam ◽  
Mahmoud Ahmed Al Abtah
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Soft Computing ◽  
Fiber Reinforced Concrete ◽  
Jute Fiber ◽  
Fiber Reinforced

Fracture properties of self-compacting fiber-reinforced concrete

2020 ◽  
Vol 11 (4) ◽  
pp. 112
Author(s):  
Mariam Farouk Ghazy ◽  
Metwally Abd Allah Abd Elaty ◽  
Omar Daboun
Keyword(s):  
Reinforced Concrete ◽  
Fiber Reinforced Concrete ◽  
Test Results ◽  
Fiber Reinforced ◽  
Bending Tests ◽  
Fracture Properties ◽  
Three Point Bending ◽  
Slump Flow ◽  
Hardened Properties ◽  
Application Fields

Self-compacting concrete (SCC) is an innovative concrete that does not necessitate vibration for placing and compaction. Nineteen concrete mixes were investigated including a control mix without fibers as well as eighteen SCC with fibers (SCFRC) mixes. Three types of fibers (polypropylene, glass and steel) were used. Slump flow, L-box, V-funnel as well as column segregation tests were conducted to assess the fresh properties. Whereas, compressive, splitting tensile and flexural strengths were measured to assess the hardened properties of SCFRC. Three point bending tests were performed for the purpose of assessing the fracture properties of SCFRC. Test results showed that the inclusion of fibers to produce SCFRC mixtures remarkably enhanced the fracture properties including fracture energy (Gf) and fracture toughness (K1c). Inclusion of steel fibers with 2% volume fractions showed an improvement with 26.9 times for Gf over the control mix. Whereas, 104% increase in K1c was recorded for the same mix over the mix without fibers. Adding fibers to SCC to produce self-compacting fiber reinforced concrete (SCFRC) will expand its advantages. However, the application fields still need to understand the properties of SCFRC.

Sign in / Sign up

Export Citation Format

Share Document