Influence of liquid accelerators combined with mineral admixtures on early hydration of cement pastes

2021 ◽  
Vol 295 ◽  
pp. 123659
Author(s):  
Renhe Yang ◽  
Tingshu He
Keyword(s):  
Mineral Admixtures ◽  
Early Hydration ◽  
Cement Pastes

scholarly journals The Influence of Water Reducing Agents on Early Hydration Property of Ferrite Aluminate Cement Paste

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 731
Author(s):  
Chunlong Huang ◽  
Zirui Cheng ◽  
Jihui Zhao ◽  
Yiren Wang ◽  
Jie Pang
Keyword(s):  
Setting Time ◽  
Critical Role ◽  
Hydration Product ◽  
Reducing Agents ◽  
Reducing Agent ◽  
Hydration Process ◽  
Early Hydration ◽  
Cement Pastes ◽  
Hydration Rate ◽  
Aluminate Cement

The ferrite aluminate cement (FAC) could rapidly lose fluidity or workability due to its excessive hydration rate, and greatly reduce the construction performance. Chemical admixtures are commonly used to provide the workability of cement-based materials. In this study, to ensure required fluidity of FAC, chemically different water reducing agents are incorporated into the FAC pastes. The experiments are performed with aliphatic water reducing agent (AP), polycarboxylic acid water reducing agent (PC) and melamine water reducing agent (MA), respectively. Influence of the water reducing agents on fluidity, setting time, hydration process, hydration product and zeta potential of the fresh cement pastes is investigated. The results show that PC has a better dispersion capacity compared to AP and MA. Besides decreasing water dosage, PC also acts as a retarder, significantly increasing the setting times, delaying the hydration rate and leading to less ettringite in the hydration process of FAC particles. The water reducing agents molecules are adsorbed on the surface of positively charged minerals and hydration products, however, for PC, steric hindrance from the long side chain of PC plays a critical role in dispersing cement particles, whereas AP and MA acting through an electrostatic repulsion force.

scholarly journals Hydration study of mechanically activated mixtures of Portland cement and fly ash

2007 ◽  
Vol 72 (6) ◽  
pp. 591-604 ◽  
Author(s):  
Gordana Stefanovic ◽  
Ljubica Cojbasic ◽  
Zivko Sekulic ◽  
Srdjan Matijasevic
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
Mechanical Activation ◽  
Early Period ◽  
Negative Effects ◽  
Early Hydration ◽  
Cement Pastes ◽  
Dta And Tg ◽  
Low Activity

Fly ash (FA) can be used in cement mixtures with certain limitations. The problem of the mentioned mixtures lies in the insufficient activity of the particles of FA in the reactions which are important for the establishment of the mechanical characteristics of cement. This is particularly true for the hydration reactions. As a result of this, cement pastes formed by mixing ash and clinker have worse characteristics compared to those of pure Portland cement (PC), especially in the early period of setting. As is well known, FA can be a good solution for the neutralization of the negative effects generated due to the creation of free Ca(OH)2 during the hydration of PC, provided that the problems with the low activity of FAare overcome. For the experiments in this study, a mixture of Portland cement and fly ash was used, the content of ash in the mixture being 30 % and 50 %. Mechanical activation was performed in a vibrating ring mill. The goal of this study was to demonstrate, through experimental results, that during the mechanical activation of a PC and FA mixture, the components in the mixture which mostly affect the direction, rate and range of hydration reactions occurring in the mixture had been activated. The values of the compressive strength of the activated and non-activated mixtures and the changes of their specific surface area proved that during the grinding process, the mixture PC+FA had been mechanically activated. The highest increase of compressive strength was achieved in the early period of setting, which indicates an improvement in the early hydration of the mixture. XRD, DTA and TG analyses showed that the alite (C3S) and belite (C2S) from the PC and a part of the fly ash were activated. .

scholarly journals The Role of Titanium Dioxide on the Hydration of Portland Cement: A Combined NMR and Ultrasonic Study

Molecules ◽  
2020 ◽  
Vol 25 (22) ◽  
pp. 5364
Author(s):  
George Diamantopoulos ◽  
Marios Katsiotis ◽  
Michael Fardis ◽  
Ioannis Karatasios ◽  
Saeed Alhassan ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Lattice Relaxation ◽  
Lattice Relaxation Time ◽  
Hydration Process ◽  
Spin Lattice Relaxation ◽  
Hydration Reaction ◽  
Early Hydration ◽  
Cement Pastes ◽  
Spin Lattice ◽  
Pore Size Distributions

Titanium dioxide (TiO2) is an excellent photocatalytic material that imparts biocidal, self-cleaning and smog-abating functionalities when added to cement-based materials. The presence of TiO2 influences the hydration process of cement and the development of its internal structure. In this article, the hydration process and development of a pore network of cement pastes containing different ratios of TiO2 were studied using two noninvasive techniques (ultrasonic and NMR). Ultrasonic results show that the addition of TiO2 enhances the mechanical properties of cement paste during early-age hydration, while an opposite behavior is observed at later hydration stages. Calorimetry and NMR spin–lattice relaxation time T1 results indicated an enhancement of the early hydration reaction. Two pore size distributions were identified to evolve separately from each other during hydration: small gel pores exhibiting short T1 values and large capillary pores with long T1 values. During early hydration times, TiO2 is shown to accelerate the formation of cement gel and reduce capillary porosity. At late hydration times, TiO2 appears to hamper hydration, presumably by hindering the transfer of water molecules to access unhydrated cement grains. The percolation thresholds were calculated from both NMR and ultrasonic data with a good agreement between both results.

Investigations on the early hydration properties of synthesized β-belites blended cement pastes

2016 ◽  
Vol 125 (1) ◽  
pp. 53-64 ◽  
Author(s):  
S. Maheswaran ◽  
S. Kalaiselvam ◽  
G. S. Palani ◽  
Saptarshi Sasmal
Keyword(s):  
Blended Cement ◽  
Hydration Properties ◽  
Early Hydration ◽  
Cement Pastes

scholarly journals Effects of Expansive Agents on the Early Hydration Kinetics of Cementitious Binders

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1900 ◽  
Author(s):  
Miao Miao ◽  
Qingyang Liu ◽  
Jian Zhou ◽  
Jingjing Feng
Keyword(s):  
Fly Ash ◽  
Hydration Heat ◽  
Mineral Admixture ◽  
Mineral Admixtures ◽  
Hydration Reaction ◽  
Hydration Kinetics ◽  
Early Hydration ◽  
Expansive Agent ◽  
Mechanical Performances ◽  
Kinetics Of

The addition of expansive agents could overcome the main disadvantages of raw concrete including high brittleness and low tensile strength. Few studies have investigated the early hydration kinetics of expansive cementitious binders, though the findings from the early hydration kinetics are helpful for understanding their technical performances. In this study, mixtures of 3CaO•3Al2O3•CaSO4 and CaSO4 (i.e., ZY-type™ expansive agent) with different proportions of mineral admixtures (e.g., fly ash and slag) were added into cement pastes to investigate the early hydration kinetics mechanism of expansive cementitious binders. Early hydration heat evolution rate and cumulative hydration heat were measured by isothermal calorimeter. Kinetic parameters were estimated based on the Krstulovic–Dabic model and Knudsen equations. Mechanical performances of expansive cementitious binders were tested in order to evaluate if they met the basic requirements of shrinkage-compensating materials in technical use. The early hydration heat released from cementitious binders containing ZY-type™ expansive agent was much greater than that released by pure cement, supporting the idea that addition of the expansive agent would improve the reaction of cement. The early hydration kinetic rates were decreased due to the reactions of the mineral admixture (e.g., fly ash or slag) and the ZY-type™ expansive agent in the cement system. The hydration reaction of cementitious binders containing ZY-type™ expansive agent obeyed the Krstulovic–Dabic model well. Three processes are involved in the hydration reaction of cementitious binders containing ZY-type™ expansive agent. These are nucleation and crystal growth (NG), interactions at phase boundaries (I), and diffusion (D). The 14-day expansion rates of cementitious binders containing ZY-type™ expansive agent are in the range of 2.0 × 10−4 to 3.5 × 10−4, which could meet the basic requirements of anti-cracking performances in technical use according to Chinese industry standard JGJ/T 178-2009. This study could provide an insight into understanding the effects of expansive agents on the hydration and mechanical performances of cementitious binders.

Investigation on the Effect of Hydroxyapatite Nanorod on Cement Hydration and Strength Development

2021 ◽  
Vol 21 (3) ◽  
pp. 1578-1589
Author(s):  
Han Yan ◽  
Qianping Ran ◽  
Yong Yang ◽  
Xin Shu ◽  
Qian Zhang ◽  
...  
Keyword(s):  
Isothermal Calorimetry ◽  
Superior Performance ◽  
Strength Development ◽  
Hydration Reaction ◽  
X Ray Diffraction ◽  
Early Hydration ◽  
Cement Pastes ◽  
Supplementary Cementitious Material ◽  
Acceleration Period

This work investigated the effect of hydroxyapatite (HA) nanorods on the strength development and hydration of cement. Undispersed HA nanorods (HA-UD) and dispersed HA nanorods (HA-DN) were prepared by atom-efficient neutralization. The strength of mortars modified by HA nanorods was tested, as well as their compatibility with supplementary cementitious material. The hydration of HA-modified cement pastes was characterized via in situ X-ray diffraction, isothermal calorimetry and scanning electron microscopy. As the results suggest, the undispersed HA-DN caused a considerable increase in superplasticizer demand to achieve the same level of flow. Both HA nanorods showed a significant accelerating effect on early hydration, with approximately 100% strength enhancement at 12 h at 2.0% dosage. The effect on early strength of the nanorods is retained in systems with up to 30% fly ash in the binder mass. According to the characterizations, the rate of the hydration reaction in the acceleration period was enhanced by HA nanorods, and C3S consumption was also increased. In all of the testing situations, HA-DN showed superior performance, likely due to improved spatial distribution of the hydroxyapatites. The results suggest that proper dispersion of the nanorods is necessary to optimize its performance.

Hydration Behavior of Metakaolin-Cement Pastes with Different Contents of Reactive Aluminous at Early Age

2010 ◽  
Vol 150-151 ◽  
pp. 419-424
Author(s):  
Tao Sun ◽  
Zhong He Shui ◽  
Gui Ming Wang
Keyword(s):  
Early Period ◽  
Xrd Analysis ◽  
Insoluble Residue ◽  
Early Age ◽  
X Ray Diffraction ◽  
Early Hydration ◽  
Cement Pastes ◽  
Reaction Velocity ◽  
X Ray ◽  
Reactive Silica

What kind of role do the reactive aluminous has played during early hydration process of metakaolin-cement paste is investigated in present study. Therefore, metakaolin(MK) samples containing 45.94%, 22.86%, 0% reactive aluminous are prepared, respectively. In addition, X-ray Diffraction (XRD) analysis is employed to identify the crystalline phases of all specimens. The amount of acid-insoluble residue (AIR) of all specimens is used to evaluate the unreacted materials. The results obtained indicate that reactive aluminous can promote development of the early period strength significantly. Reactive silica and reactive aluminous reaction velocity was very slow during the first three days, then increased. The reaction velocity of reactive aluminous was faster than reactive silica between the first day and third day, but it shows an opposite result between the third day and seventh day.

Sign in / Sign up

Export Citation Format

Share Document