Research on the anti-aging mechanism of SBS-modified asphalt compounded with multidimensional nanomaterials based on atomic force microscopy

Moisture susceptibility plays an important role in the damage of asphalt pavement. Failure occurs when asphalt is removed from the aggregate particles due to the decreased adhesion between the asphalt and aggregate in comparison with that between water and the aggregate. In recent years, efforts utilizing nanomaterials to improve the diverse properties of asphalt have proven to be effective. In this study, three types of nanoclays were used to modify styrene-butadiene-styrene- (SBS-) modified asphalt. The resistances to water damage of the modified binders were evaluated using the surface free energy (SFE) and atomic force microscopy (AFM). The results revealed that the total SFE decreased and the energy ratio (ER) increased when the asphalt binder was modified with the nanoclays, indicating that the addition of nanoclays can improve the moisture resistance of these aggregate-binder systems. After immersion, a decreased amount of bee structures was observed in both the SBS and nanoclay-modified asphalts due to the interactions between water and bitumen. However, the residual amount of bee structures was higher in the nanoclay-modified asphalts than in the SBS-modified asphalt, indicating that the addition of nanoclay makes the surface morphology of asphalt more resistant to water damage. Finally, freeze-thaw splitting tests were used to verify the results obtained through the SFE and AFM tests.

Download Full-text

Multiscale Study on the Modification Mechanism of Red Mud Modified Asphalt

Advances in Materials Science and Engineering ◽

10.1155/2020/2150215 ◽

2020 ◽

Vol 2020 ◽

pp. 1-9

Author(s):

Tao Fu ◽

JianHui Wei ◽

Huiming Bao ◽

Junlin Liang

Keyword(s):

Differential Scanning Calorimetry ◽

Atomic Force Microscopy ◽

Interfacial Energy ◽

Red Mud ◽

Heat Absorption ◽

Scanning Calorimetry ◽

Force Microscopy ◽

Modified Asphalt ◽

Freeze Thaw ◽

Atomic Force

Red mud, a waste residue of aluminium industry, was used as modified asphalt material to prepare red mud modified asphalt and red mud modified asphalt under freeze-thaw cycles. The matrix asphalt (MA), red mud modified asphalt (RMMA), and red mud modified asphalt under freeze-thaw cycles (RMMAFC) were studied by scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FTIR), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). Microscopic experiments were conducted to investigate the modification performance and mechanism. The modification mechanism of red mud modified asphalt was investigated using molecular dynamics simulation in this study. The results show that red mud can form a uniform and stable blending system with base asphalt after adding base asphalt. The structure of asphalt after adding red mud and adding red mud and freezing-thawing cycles does not change. The bee-structure decreases obviously with the addition of red mud by atomic force microscopy (AFM). Density decreases gradually, but bee-structure height increases obviously; bee-structure of red mud modified asphalt is destroyed after freeze-thaw cycles. Through differential scanning calorimetry (DSC), after adding red mud, heat absorption decreases. Freeze-thaw cycles greatly reduce heat absorption of red mud modified asphalt. Constructing molecular model of major components of red mud (Fe2O3, Al2O3) and asphaltene, simulation results show that the interfacial energy between asphaltene and red mud’s main components Fe2O3 and Al2O3 at −10°C, 25°C, and 170°C is stronger than that of Fe2O3. The results of calculating the interfacial energy of asphaltene on the chemical composition surface of red mud are negative. It can be seen that there are adsorption effects on the surface of asphaltene and red mud. Therefore, increasing the content of Al2O3 or decreasing the content of Fe2O3 in red mud is beneficial to the adsorption of asphaltene.

Download Full-text

Identifying the Thermal Storage Stability of Polymer-Modified Asphalt with Carbon Nanotubes Based on Its Macroperformance and Micromorphology

Advances in Materials Science and Engineering ◽

10.1155/2021/6637999 ◽

2021 ◽

Vol 2021 ◽

pp. 1-17

Author(s):

Xi-yin Liu ◽

Peng Wang ◽

Yu Lu ◽

Tian-tao Zhang ◽

Li-zhi Wang ◽

...

Keyword(s):

Carbon Nanotubes ◽

Atomic Force Microscopy ◽

Storage Stability ◽

Thermal Storage ◽

Rich Phase ◽

Force Microscopy ◽

Modified Asphalt ◽

Atomic Force ◽

Polymer Modified Asphalt

The thermal storage stability of polymer-modified asphalt (PMA) is the key to avoid performance attenuation during storage and transportation in pavement engineering. However, phase separation of PMA continuously occurs after long-term thermal storage due to the overlooked influence of the phase interface. Two kinds of carbon nanotubes (CNTs) and styrene-butadiene-styrene triblock copolymer (SBS) were selected in this paper to address the aforementioned issue. The segregation test was used to simulate the long-term storage process from 0 to 10 days. Macroperformance included the softening point difference (△SP), irrecoverable compliance (Jnr), recovery rate (R%), and complex modulus (G∗) measured by the softening point test, multistress creep recovery (MSCR) test, and small strain oscillatory rheological test. Microcharacteristics were obtained by the SBS characteristic peak index, SBS-rich phase distribution, polymer swelling degree, and particle characteristics of the SBS-rich phase. They were measured by Fourier-transformed infrared spectroscopy (FT-IR), fluorescence microscopy (FM), and atomic force microscopy (AFM), respectively. Results showed that the optimum CNT amount necessary to obtain an improved thermal storage stability of PMA was 0.5 wt.%. After 10 days of storage, the largest R% of SBS modified asphalt (SBSMA) decreased to 2.24% and the smallest Jnr increased to 0.069 1/kPa, while R% of SBSMA with CNTs was 62.15% and its Jnr was 0.013 1/kPa. R% and Jnr of SBSMA with CNTs showed almost no change after 6 days of storage, implying an effective antirutting performance. The results from the microperformance investigation showed that phase separation of SBS mainly occurred on day 4, while SBS degradation and base asphalt aging led to the worse macroperformance after 10 days of storage. Additional CNTs restrained the SBS-rich phase from floating upward. Meanwhile, a small size of polymer-rich phase and dense network of SBSMA with CNTs were observed in fluorescence microscopy and atomic force microscopy images, thereby exhibiting improved thermal storage stability. Adding CNTs would retard the segregation due to CNT entanglement with SBS.

Download Full-text