scholarly journals Comparative analysis of Maxwell and Xue models for a hybrid nanofluid film flow on an inclined moving substrate

2021 ◽  
pp. 101598
Author(s):  
Yan Zhang ◽  
Nazia Shahmir ◽  
Muhammad Ramzan ◽  
Hassan Ali S. Ghazwani ◽  
M.Y. Malik
Keyword(s):  
Comparative Analysis ◽  
Film Flow ◽  
Hybrid Nanofluid ◽  
Moving Substrate

Influences of Marangoni Convection and Variable Magnetic Field Hybrid Nanofluid Thin Film Flow past a Stretching Surface

2021 ◽  
Author(s):  
Noor Wali Khan ◽  
Arshad Khan ◽  
Muhammad Usman ◽  
Taza Gul ◽  
Abir Mouldi ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Thin Film ◽  
Film Flow ◽  
Marangoni Convection ◽  
Flow System ◽  
Thermal Characteristics ◽  
Variable Magnetic Field ◽  
Current Work ◽  
Hybrid Nanofluid ◽  
Thin Film Flow

Abstract The investigations about thin-film flow play a vital role in the field of optoelectronics and magnetic devices. Thin films are reasonably hard and thermally stable but are more fragile. The thermal stability of thin film can be further improved by incorporating the effects of nanoparticles. In the current work, a stretchable surface is considered upon which hybrid nanofluid thin-film flow is taken into account. The idea of augmenting heat transmission is focused in current work by making use of hybrid nanofluid. The flow is affected by variations in the viscous forces along with viscous dissipation effects and Marangoni convection. A time-constrained magnetic field is applied in the normal direction to the flow system. The equations governing the flow system are shifted to a non-dimensional form by applying similarity variables. The homotopy analysis method (HAM) has been employed to find the solution of resultant equations. It has been noticed in this study that, the flow characteristics decline with augmentation in magnetic, viscosity, and unsteadiness parameters while grow up with enhancing values of thin-film parameter. Thermal characteristics are supported by the growing values of the Eckert number and unsteadiness parameter while opposed by the viscosity parameter and Prandtl number. The numerical impact of different emerging parameters upon skin friction and Nusselt number has been calculated in tabular form. A comparison of current work with established result has carried out with a good agreement in both results.

scholarly journals Heat Transfer Analysis of Cu and Al 2 0 3 Dispersed in Ethylene Glycol as a Base Fluid over a Stretchable Permeable Sheet of MHD Thin-film Flow

2021 ◽  
Author(s):  
Zeeshan Khan ◽  
Ilyas Khan
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Differential Equations ◽  
Ethylene Glycol ◽  
Film Thickness ◽  
Film Flow ◽  
Heat Transfer Analysis ◽  
Hybrid Nanofluid ◽  
Thin Film Flow ◽  
Thin Film Thickness

Abstract The process of thin films is commonly utilized to improve the surface characteristics of materials. A thin film helps to improve the absorption, depreciation, flexibility, lighting, transport, and electromagnetic efficiency of a bulk material medium. Thin film treatment can be especially helpful in nanotechnology. As a result, the current study investigates the computational process of heat relocation analysis in a thin-film MHD flow embedded in hybrid nanoparticles, which combines the spherical copper and alumina dispersed in ethylene glycol as the conventional heat transfer Newtonian fluid model over a stretching sheet. Important elements such as thermophoresis and Brownian movement are used to explain the characteristics of heat and mass transfer analysis. Nonlinear higher differential equations (ODEs) were attained by transforming partial differential equations (PDEs) into governing equations when implementing the similarity transformation technique. The resulting nonlinear ODEs have been utilized by using the homotopy analysis method (MHD). The natures of the thin-film flow and heat transfer through the various values of the pertinent parameters: unsteadiness, nanoparticle volume fraction, thin-film thickness, magnetic interaction and intensity suction/injection are deliberated. The approximate consequences for flow rate and temperature distributions and physical quantities in terms of local skin friction and Nusselt number were obtained and analysed via graphs and tables. As a consequence, the suction has a more prodigious effect on the hybrid nanofluid than on the injection fluid for all the investigated parameters. It is worth acknowledging that the existence of the nanoparticles and MHD in the viscous hybrid nanofluid tends to enhance the temperature profile but decay the particle movement in the thin-film flow. It is perceived that the velocity and temperature fields decline with increasing unsteadiness, thin-film thickness and suction/injection parameters.

scholarly journals Flow and heat transfer of hybrid nanofluid over a permeable shrinking cylinder with Joule heating: A comparative analysis

2020 ◽  
Vol 59 (3) ◽  
pp. 1787-1798 ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Norihan Md Arifin ◽  
Ioan Pop ◽  
Nur Syahirah Wahid
Keyword(s):  
Heat Transfer ◽  
Comparative Analysis ◽  
Joule Heating ◽  
Hybrid Nanofluid ◽  
Flow And Heat Transfer

Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel

2019 ◽  
Vol 234 (5) ◽  
pp. 712-729
Author(s):  
Archana Thakur ◽  
Alakesh Manna ◽  
Sushant Samir
Keyword(s):  
Comparative Analysis ◽  
Desirability Function ◽  
Cutting Temperature ◽  
Minimum Quantity Lubrication ◽  
Hybrid Nanofluid ◽  
Machining Performance ◽  
Optimization Of Parameters ◽  
Minimum Quantity ◽  
Response Optimization ◽  
Hybrid Nanofluids

The present work evaluates the performance of different machining environments such as dry, wet, minimum quantity lubrication, Al2O3 nanofluids based minimum quantity lubrication, CuO nanofluids based minimum quantity lubrication and Al–CuO hybrid nanofluids based minimum quantity lubrication on machining performance characteristics during turning of EN-24. The nanofluids and hybrid nanofluids were prepared by adding the Al2O3, CuO and Al2O3/CuO to the soluble oil with different weight percentages (0.5 wt.%, 1 wt.%, 1.5 wt.%). The thermal and tribological properties of hybrid nanofluid and nanofluids were analyzed. The comparative analysis of different turning environments has been done. From comparative analysis it is clearly observed that the nanofluids and hybrid nanofluid shows better performance during turning of EN-24 steel. So there is a need for optimization of parameters during turning of EN-24 under Al2O3 nanofluids based minimum quantity lubrication, CuO nanofluids based minimum quantity lubrication and Al–CuO hybrid nanofluids based minimum quantity lubrication. The optimization of parameters has been done by response surface methodology. The significance of developed model was identified from analysis of variance. Multi-response optimization was done using desirability function approach. To verify the accuracy of developed models, confirmatory experiments were performed. The experimental results reveal that Al–CuO hybrid nanofluids based minimum quantity lubrication significantly improves surface quality, reduces cutting temperature and cutting forces.

Thin film flow of the water‐based carbon nanotubes hybrid nanofluid under the magnetic effects

Heat Transfer ◽  
2020 ◽  
Vol 49 (6) ◽  
pp. 3211-3227 ◽  
Author(s):  
Taza Gul ◽  
Muhammad Bilal ◽  
Muhammad Shuaib ◽  
Safyan Mukhtar ◽  
Phatiphat Thounthong
Keyword(s):  
Thin Film ◽  
Carbon Nanotubes ◽  
Film Flow ◽  
Hybrid Nanofluid ◽  
Thin Film Flow ◽  
Magnetic Effects ◽  
Water Based

Unsteady magnetohydrodynamic radiative liquid thin film flow of hybrid nanofluid with thermophoresis and Brownian motion

2019 ◽  
Vol 16 (4) ◽  
pp. 811-834
Author(s):  
C. Sulochana ◽  
S.R. Aparna
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Brownian Motion ◽  
Transfer Rate ◽  
Film Flow ◽  
Hybrid Nanofluid ◽  
Thin Film Flow ◽  
Content Type ◽  
Aluminium Copper ◽  
Practical Implications

Purpose The purpose of this paper is to analyze heat and mass transport mechanism of unsteady MHD thin film flow of aluminium–copper/water hybrid nanofluid influenced by thermophoresis, Brownian motion and radiation. Design/methodology/approach The authors initially altered the time dependent set of mathematical equations into dimensionless form of equations by using apposite transmutations. These equations are further solved numerically by deploying Runge–Kutta method along with shooting technique. Findings Plots and tables for skin friction coefficient, Nusselt number, Sherwood number along with velocity, temperature and concentration profiles against pertinent non-dimensional parameters are revealed. The study imparts that aluminium–copper hybrid nanoparticles facilitate higher heat transfer rate compared to mono nanoparticles. It is noteworthy to disclose that an uplift in thermophoresis and Brownian parameter depreciates heat transfer rate, while concentration profiles boost with an increase in thermophoretic parameter. Research limitations/implications The current study targets to investigate heat transfer characteristics of an unsteady thin film radiative flow of water-based aluminium and copper hybrid nanofluid. The high thermal and electrical conductivities, low density and corrosion resistant features of aluminium and copper with their wide range of industrial applications like power generation, telecommunication, automobile manufacturing, mordants in leather tanning, etc., have prompted us to instil these particles in the present study. Practical implications The present study has many practical implications in the industrial and manufacturing processes working on the phenomena like heat transfer, magnetohydrodynamics, thermal radiation, nanofluids, hybrid nanofluids with special reference to aluminium and copper particles. Originality/value To the best extent of the authors’ belief so far no attempt is made to inspect the flow, thermal and mass transfer of water-based hybridized aluminium and copper nanoparticles with Brownian motion and thermophoresis.

scholarly journals Synthesis and Application of Ternary Nanofluid for Photovoltaic-Thermal System: Comparative Analysis of Energy and Exergy Performance with Single and Hybrid Nanofluids

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4434
Author(s):  
Humphrey ADUN ◽  
Mustapha Mukhtar ◽  
Micheal Adedeji ◽  
Terfa Agwa ◽  
Kefas Hyelda Ibrahim ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Comparative Analysis ◽  
Real Data ◽  
Hybrid Nanofluid ◽  
Step Method ◽  
Practical Utilization ◽  
Hybrid Nanofluids ◽  
Efficient Heat Transfer ◽  
Exergy Performance ◽  
T System

The amelioration of photovoltaic (PV) and photovoltaic/thermal (PV/T) systems have garnered increased research interest lately, more so due to the discovery of the thermal property augmentation of nanofluids. The overarching goal of this study is to conduct a comparative analysis of mono, hybrid, and ternary hybrid nanofluids utilized as fluids for heat transfer applications and particularly as cooling mediums in PV/T applications. Al2O3, ZnO, Al2O3-ZnO, and Al2O3-ZnO-Fe3O4 nanofluids are synthesized at 1% volume concentration using the two-step method. The zeta potential tests carried out showed that the fluids have high stability. The numerical model developed in this study was validated using real data culled from Cyprus International University. The findings in this study showed that the Al2O3-ZnO-Fe3O4 ternary hybrid nanofluid and ZnO mono nanofluid were more efficient heat transfer fluids for the PV/T system. The optimum relative electrical PV/T efficiency against that of the PV is 8.13% while the electrical and thermal enhancement recorded in this study was 1.79% and 19.06%, respectively, measured for the ternary hybrid nanofluid based PV/T system. This present study shows that despite the limitation of pumping power and pressure drop associated with nanofluid in thermal systems, the close performance evaluation criterion values as compared with water is positive for practical utilization of nanofluid in PV/T systems.

Sign in / Sign up

Export Citation Format

Share Document