Effect of fiber volume fraction and length on the wear characteristics of glass fiber-reinforced dental composites

2006 ◽  
Vol 22 (1) ◽  
pp. 84-93 ◽  
Author(s):  
David J. Callaghan ◽  
Ashkan Vaziri ◽  
Hamid Nayeb-Hashemi
Keyword(s):  
Glass Fiber ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Dental Composites ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Wear Characteristics ◽  
Glass Fiber Reinforced

Single and repeated low-velocity impact response of E-glass fiber-reinforced epoxy and polypropylene composites for different impactor shapes

2019 ◽  
pp. 089270571988691 ◽  
Author(s):  
Akar Dogan
Keyword(s):  
Glass Fiber ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Low Velocity Impact ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Fiber Volume ◽  
Velocity Impact ◽  
Polypropylene Composites ◽  
Glass Fiber Reinforced

This study focuses on the effects of low-velocity impact (LVI) response of thermoset (TS) and thermoplastic (TP) matrix-based composites. In this study, the effects of the impactor shapes on the low-velocity impact response of the composite panels that produced from different matrix was investigated. Unidirectional E-glass fiber fabrics with an areal density of 300 g/m2 as reinforcement and epoxy matrix were used to produce TS composite. The vacuum-assisted resin infusion molding (VARIM) method was used to manufacture composite panels. The thermoplastic composites were manufactured with E-glass fiber-reinforced polypropylene prepregs. The tensile strength of TS matrix-based composites is higher than TP matrix-based composites that have the same fiber volume fraction. Despite being under the same impact energy, the TP specimens possess higher perforation threshold than TS specimens. The shape of the impactor significantly affected the perforation threshold. Besides, the impact number that caused perforation reduced dramatically in conical impactor. The repeated impact number that caused perforation is 36 for hemispherical (HS) impactor, but it is only 3 for conical impactor for polypropylene matrix-based composite. Moreover, a significant effect of fiber volumetric ratio on impact resistance was observed. The perforation threshold of glass fiber-reinforced polypropylene composites for 40% and 50% fiber volume fraction are 61 and 98 J, respectively. The perforation threshold of TP and TS specimens for HS impactor that has the same stacking sequence is 61 and 55 J, respectively.

Experiment Investigation on Mechanical Property of Glass Fiber Reinforced Concrete

2014 ◽  
Vol 915-916 ◽  
pp. 784-787
Author(s):  
Yan Lv
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Glass Fiber ◽  
Volume Fraction ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced

Based on the mechanical properties experiment of the glass fiber reinforced concrete with 0%0.6%0.8% and 1% glass fiber volume fraction, the mechanics property such as tensile strength, compressive strength, flexural strength and flexural elasticity modulus are analyzed and compared with the plain concrete when the kinds of fiber content changes. The research results show that the effect of tensile strength and flexural strength can be improved to some extent, which also can serve as a reference or basis for further improvement and development the theory and application of the glass fiber reinforced concrete.

Probability Distribution of Flexural Fatigue Life for Glass Fiber Reinforced Concrete

2013 ◽  
Vol 444-445 ◽  
pp. 1695-1701
Author(s):  
Yan Lv ◽  
He Ming Cheng
Keyword(s):  
Reinforced Concrete ◽  
Fatigue Life ◽  
Weibull Distribution ◽  
Glass Fiber ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced ◽  
Two Parameter

Through the fatigue experiments of glass fiber reinforced concrete (GFRC) specimens with 0%0.6%0.8% and 1% glass fiber volume fraction, the fatigue-lives of GFRC at various stress levels were obtained. The results indicate that the statistical distribution of fatigue-life of GFRC is in agreement with the two-parameter Weibull distribution. According to the statistical analysis of fatigue-life,the study shows the fatigue life of GFRC follows both the two-parameter Weibull distribution and three-parameter Weibull distribution, but three-parameter Weibull distribution is more suitable for expressing the law. Besides, the S-N curves and P-S-N curves which can be used to determine the life of GFRC under constant amplitude fatigue load were obtained.The results indicate that GFRC has distinguished anti-fatigue property.

The Importance of Material Structure in the Laser Cutting of Glass Fiber Reinforced Plastic Composites

1995 ◽  
Vol 117 (1) ◽  
pp. 133-138 ◽  
Author(s):  
G. Caprino ◽  
V. Tagliaferri ◽  
L. Covelli
Keyword(s):  
Experimental Data ◽  
Glass Fiber ◽  
Laser Cutting ◽  
Material Structure ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Glass Fiber Reinforced Plastic ◽  
Fiber Reinforced Plastic ◽  
Glass Fiber Reinforced ◽  
Reinforced Plastic

A previously proposed micromechanical formula, aiming to predict the vaporization energy Qv of composite materials as a function of fiber and matrix properties and fiber volume ratio, was assessed. The experimental data, obtained on glass fiber reinforced plastic panels with different fiber contents cut by a medium power CO2 cw laser, were treated according to a procedure previously suggested, in order to evaluate Qv. An excellent agreement was found between experimental and theoretical Qv values. Theory was then used to predict the response to laser cutting of a composite material with a fiber content varying along the thickness. The theoretical predictions indicated that, in this case, the interpretation of the experimental results may be misleading, bringing to errors in the evaluation of the material thermal properties, or in the prediction of the kerf depth. Some experimental data were obtained, confirming the theoretical findings.

Performance of Bamboo Fiber Reinforced Composites: Mechanical Properties

2021 ◽  
Vol 879 ◽  
pp. 284-293
Author(s):  
Norliana Bakar ◽  
Siew Choo Chin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Vinyl Ester ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Bamboo Fiber ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Volume Fractions

Fiber Reinforced Polymer (FRP) made from synthetic fiber had been widely used for strengthening of reinforced concrete (RC) structures in the past decades. Due to its high cost, detrimental to the environment and human health, natural fiber composites becoming the current alternatives towards a green and environmental friendly material. This paper presents an investigation on the mechanical properties of bamboo fiber reinforced composite (BFRC) with different types of resins. The BFRC specimens were prepared by hand lay-up method using epoxy and vinyl-ester resins. Bamboo fiber volume fractions, 30%, 35%, 40%, 45% and 50% was experimentally investigated by conducting tensile and flexural test, respectively. Results showed that the tensile and flexural strength of bamboo fiber reinforced epoxy composite (BFREC) was 63.2% greater than the bamboo fiber reinforced vinyl-ester composite (BFRVC). It was found that 45% of bamboo fiber volume fraction on BFREC exhibited the highest tensile strength compared to other BFRECs. Meanwhile, 40% bamboo fiber volume fraction of BFRVC showed the highest tensile strength between bamboo fiber volume fractions for BFRC using vinyl-ester resin. Studies showed that epoxy-based BFRC exhibited excellent results compared to the vinyl-ester-based composite. Further studies are required on using BFRC epoxy-based composite in various structural applications and strengthening purposes.

Shear strength of reinforced concrete beams with a fiber concrete matrix

2006 ◽  
Vol 33 (6) ◽  
pp. 726-734 ◽  
Author(s):  
Fariborz Majdzadeh ◽  
Sayed Mohamad Soleimani ◽  
Nemkumar Banthia
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Reinforcement ◽  
Shear Capacity ◽  
Fiber Reinforced Concrete ◽  
Rc Beams ◽  
Fiber Reinforced ◽  
Fiber Volume

The purpose of this study was to investigate the influence of fiber reinforcement on the shear capacity of reinforced concrete (RC) beams. Both steel and synthetic fibers at variable volume fractions were investigated. Two series of tests were performed: structural tests, where RC beams were tested to failure under an applied four-point load; and materials tests, where companion fiber-reinforced concrete (FRC) prisms were tested under direct shear to obtain material properties such as shear strength and shear toughness. FRC test results indicated an almost linear increase in the shear strength of concrete with an increase in the fiber volume fraction. Fiber reinforcement enhanced the shear load capacity and shear deformation capacity of RC beams, but 1% fiber volume fraction was seen as optimal; no benefits were noted when the fiber volume fraction was increased beyond 1%. Finally, an equation is proposed to predict the shear capacity of RC beams.Key words: shear strength, fiber-reinforced concrete, RC beam, stirrups, energy absorption capacity, steel fiber, synthetic fiber.

Sign in / Sign up

Export Citation Format

Share Document