Comprehensive analysis of a novel power and cooling cogeneration system based on organic Rankine cycle and ejector refrigeration cycle

2021 ◽  
Vol 232 ◽  
pp. 113898
Author(s):  
Wei Yu ◽  
Huitao Wang ◽  
Zhong Ge
Keyword(s):  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Comprehensive Analysis ◽  
Refrigeration Cycle ◽  
Cogeneration System

scholarly journals Performance comparison of the solar-driven supercritical organic Rankine cycle coupled with the vapour-compression refrigeration cycle

Clean Energy ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 476-491
Author(s):  
Yunis Khan ◽  
Radhey Shyam Mishra
Keyword(s):  
Thermal Efficiency ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Coefficient Of Performance ◽  
Solar Irradiation ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Exergy Destruction ◽  
Cogeneration System ◽  
Vapour Compression

Abstract In this study, a parametric analysis was performed of a supercritical organic Rankine cycle driven by solar parabolic trough collectors (PTCs) coupled with a vapour-compression refrigeration cycle simultaneously for cooling and power production. Thermal efficiency, exergy efficiency, exergy destruction and the coefficient of performance of the cogeneration system were considered to be performance parameters. A computer program was developed in engineering equation-solver software for analysis. Influences of the PTC design parameters (solar irradiation, solar-beam incidence angle and velocity of the heat-transfer fluid in the absorber tube), turbine inlet pressure, condenser and evaporator temperature on system performance were discussed. Furthermore, the performance of the cogeneration system was also compared with and without PTCs. It was concluded that it was necessary to design the PTCs carefully in order to achieve better cogeneration performance. The highest values of exergy efficiency, thermal efficiency and exergy destruction of the cogeneration system were 92.9%, 51.13% and 1437 kW, respectively, at 0.95 kW/m2 of solar irradiation based on working fluid R227ea, but the highest coefficient of performance was found to be 2.278 on the basis of working fluid R134a. It was also obtained from the results that PTCs accounted for 76.32% of the total exergy destruction of the overall system and the cogeneration system performed well without considering solar performance.

Thermodynamic analysis of a wall mounted gas boiler with an organic Rankine cycle and hydrogen production unit

2017 ◽  
Vol 28 (7) ◽  
pp. 725-743 ◽  
Author(s):  
Anahita Moharamian ◽  
Saeed Soltani ◽  
Faramarz Ranjbar ◽  
Mortaza Yari ◽  
Marc A Rosen
Keyword(s):  
Hydrogen Production ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Inlet Pressure ◽  
Pinch Point ◽  
Working Fluids ◽  
Turbine Inlet ◽  
Energy And Exergy ◽  
Cogeneration System ◽  
Net Power Output

A novel cogeneration system based on a wall mounted gas boiler and an organic Rankine cycle with a hydrogen production unit is proposed and assessed based on energy and exergy analyses. The system is proposed in order to have cogenerational functionality and assessed for the first time. A theoretical research approach is used. The results indicate that the most appropriate organic working fluids for the organic Rankine cycle are HFE700 and isopentane. Utilizing these working fluids increases the energy efficiency of the integrated wall mounted gas boiler and organic Rankine cycle system by about 1% and the organic Rankine cycle net power output about 0.238 kW compared to when the systems are separate. Furthermore, increasing the turbine inlet pressure causes the net power output, the organic Rankine cycle energy and exergy efficiencies, and the cogeneration system exergy efficiency to rise. The organic Rankine cycle turbine inlet pressure has a negligible effect on the organic Rankine cycle mass flow rate. Increasing the pinch point temperature decreases the organic Rankine cycle turbine net output power. Finally, increasing the turbine inlet pressure causes the hydrogen production rate to increase; the highest and lowest hydrogen production rates are observed for the working fluids for HFE7000 and isobutane, respectively. Increasing the pinch point temperature decreases the hydrogen production rate. In the cogeneration system, the highest exergy destruction rate is exhibited by the wall mounted gas boiler, followed by the organic Rankine cycle evaporator, the organic Rankine cycle turbine, the organic Rankine cycle condenser, the proton exchange membrane electrolyzer, and the organic Rankine cycle pump, respectively.

Thermoeconomic Analysis of a Combined Natural Gas Cogeneration System With a Supercritical CO2 Brayton Cycle and an Organic Rankine Cycle

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Zhen Pan ◽  
Mingyue Yan ◽  
Liyan Shang ◽  
Ping Li ◽  
Li Zhang ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Inlet Temperature ◽  
Total System ◽  
Brayton Cycle ◽  
Exhaust Gas ◽  
Total Cost ◽  
Cogeneration System ◽  
Isentropic Efficiency

Abstract This paper proposes a new type of Gas Turbine Cycle-supercritical CO2 Brayton/organic Rankine cycle (GT-SCO2/ORC) cogeneration system, in which the exhaust gas from gas-fired plants generates electricity through GT and then the remaining heat is absorbed by the supercritical CO2 (SCO2) Brayton cycle and ORC. CO2 contained in the exhaust gas is absorbed by monoethanolamine (MEA) and liquefied via liquified natural gas (LNG). Introducing thermodynamic efficiencies, thermoeconomic analysis to evaluate the system performance and total system cost is used as the evaluation parameter. The results show that the energy efficiency and exergy efficiency of the system are 56.47% and 45.46%, respectively, and the total cost of the product is 2798.38 $/h. Moreover, with the increase in air compressor (AC) or gas turbine isentropic efficiency, GT inlet temperature, and air preheater (AP) outlet temperature, the thermodynamic efficiencies have upward trends, which proves these four parameters optimize the thermodynamic performance. The total system cost can reach a minimum value with the increase in AC pressure ratio, GT isentropic efficiency, and AC isentropic efficiency, indicating that these three parameters can optimize the economic performance of the cycle. The hot water income increases significantly with the increase in the GT inlet temperature, but it is not cost-effective in terms of the total cost.

Performance Evaluation of a Small Scale High Efficiency Cogeneration System

2006 ◽  
Author(s):  
Mauro Reini
Keyword(s):  
High Efficiency ◽  
Pressure Ratio ◽  
Organic Rankine Cycle ◽  
Thermodynamic Cycle ◽  
Rankine Cycle ◽  
Combined Cycle ◽  
Working Fluid ◽  
Small Scale ◽  
Performance Parameters ◽  
Cogeneration System

In recent years, a big effort has been made to improve microturbines thermal efficiency, in order to approach 40%. Two main options may be considered: i) a wide usage of advanced materials for hot ends components, like impeller and recuperator; ii) implementing more complicated thermodynamic cycle, like combined cycle. In the frame of the second option, the paper deals with the hypothesis of bottoming a low pressure ratio, recuperated gas cycle, typically realized in actual microturbines, with an Organic Rankine Cycle (ORC). The object is to evaluate the expected nominal performance parameters of the integrated-combined cycle cogeneration system, taking account of different options for working fluid, vapor pressure and component’s performance parameters. Both options of recuperated and not recuperated bottom cycles are discussed, in relation with ORC working fluid nature and possible stack temperature for microturbine exhaust gases. Finally, some preliminary consideration about the arrangement of the combined cycle unit, and the effects of possible future progress of gas cycle microturbines are presented.

scholarly journals Energy and Exergy Analysis of Combined Organic Rankine Cycle-Single and Dual Evaporator Vapor Compression Refrigeration Cycle

2019 ◽  
Vol 9 (23) ◽  
pp. 5028 ◽  
Author(s):  
Pektezel ◽  
Acar
Keyword(s):  
Exergy Analysis ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Vapor Compression ◽  
Exergy Destruction ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis ◽  
Vapor Compression Refrigeration

This paper presents energy and exergy analysis of two vapor compression refrigeration cycles powered by organic Rankine cycle. Refrigeration cycle of combined system was designed with single and dual evaporators. R134a, R1234ze(E), R227ea, and R600a fluids were used as working fluids in combined systems. Influences of different parameters such as evaporator, condenser, boiler temperatures, and turbine and compressor isentropic efficiencies on COPsys and ƞex,sys were analyzed. Second law efficiency, degree of thermodynamic perfection, exergy destruction rate, and exergy destruction ratio were detected for each component in systems. R600a was determined as the most efficient working fluid for proposed systems. Both COPsys and ƞex,sys of combined ORC-single evaporator VCR cycle was detected to be higher than the system with dual evaporator.

scholarly journals Fuels from Waste as Renewable Energy in Distributed Generation on the Example of the ORC System

Recycling ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 26
Author(s):  
Monika Czop ◽  
Nikolina Poranek ◽  
Adrian Czajkowski ◽  
Łukasz Wagstyl
Keyword(s):  
Distributed Generation ◽  
Ecological Validity ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Combined Heat And Power ◽  
Hard Coal ◽  
Small Scale ◽  
Thermal Transition ◽  
Cogeneration System

The article compares the energetic qualities of fuels from waste with hard coal. A cogeneration system has been modeled based on the organic Rankine cycle (ORC) powered by the investigated fuels in order to identify possibilities as well as problems in use of fuels from waste in an exemplary cogeneration unit in distributed generation. The emission of thermal transition of the investigated fuels has been calculated on the basis of their energetic use in order to determine the aggregate impact on the environment, people’s health and the ecosystem. In order to conduct the research, Ebsilon Professional and SIMAPro software were used. The article demonstrated the energetic and ecological validity of the use of fuels form waste in small-scale combined heat and power (CHP). The energetic potential and influence on the environment, people’s health and the ecosystem depends on the quality of fuel, but the strict regulations for generating fuels from waste and the flexibility in forming them, allow for a product which is more beneficial economically and ecologically than hard coal.

Sign in / Sign up

Export Citation Format

Share Document