Non-linear time history analysis of reinforced concrete coupled shear walls: Comparison of old design, modern design and retrofitted with externally bonded CFRP composites

2019 ◽  
Vol 185 ◽  
pp. 353-365 ◽  
Author(s):  
Sara Honarparast ◽  
Omar Chaallal
Keyword(s):  
Reinforced Concrete ◽  
Linear Time ◽  
Time History ◽  
Shear Walls ◽  
Time History Analysis ◽  
Modern Design ◽  
Cfrp Composites ◽  
History Analysis ◽  
Non Linear ◽  
Externally Bonded

scholarly journals Record-to-record variability and code-compatible seismic safety-checking with limited number of records

2021 ◽  
Author(s):  
Fatemeh Jalayer ◽  
Hossein Ebrahimian ◽  
Andrea Miano
Keyword(s):  
Seismic Hazard ◽  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
Seismic Safety ◽  
Hazard Curve ◽  
History Analysis ◽  
Non Linear ◽  
Seismic Hazard Curve ◽  
Cloud Analysis

AbstractThe Italian code requires spectrum compatibility with mean spectrum for a suite of accelerograms selected for time-history analysis. Although these requirements define minimum acceptability criteria, it is likely that code-based non-linear dynamic analysis is going to be done based on limited number of records. Performance-based safety-checking provides formal basis for addressing the record-to-record variability and the epistemic uncertainties due to limited number of records and in the estimation of the seismic hazard curve. “Cloud Analysis” is a non-linear time-history analysis procedure that employs the structural response to un-scaled ground motion records and can be directly implemented in performance-based safety-checking. This paper interprets the code-based provisions in a performance-based key and applies further restrictions to spectrum-compatible record selection aiming to implement Cloud Analysis. It is shown that, by multiplying a closed-form coefficient, code-based safety ratio could be transformed into simplified performance-based safety ratio. It is shown that, as a proof of concept, if the partial safety factors in the code are set to unity, this coefficient is going to be on average slightly larger than unity. The paper provides the basis for propagating the epistemic uncertainties due to limited sample size and in the seismic hazard curve to the performance-based safety ratio both in a rigorous and simplified manner. If epistemic uncertainties are considered, the average code-based safety checking could end up being unconservative with respect to performance-based procedures when the number of records is small. However, it is shown that performance-based safety checking is possible with no extra structural analyses.

Evaluation of Structure Performance under Seismic Load with Non-Liner Time History on High-Rise Building Affected by Kendeng Fault Earthquake Simulation

2021 ◽  
Vol 879 ◽  
pp. 232-242
Author(s):  
A.N. Refani ◽  
Yuyun Tajunnisa ◽  
K. Yudoprasetyo ◽  
F. Ghifari ◽  
D.I. Wahyudi
Keyword(s):  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
Performance Level ◽  
Ground Movement ◽  
Seismic Load ◽  
Earthquake Simulation ◽  
Geophysical Research ◽  
History Analysis ◽  
Non Linear

Indonesia is a country located in the convergence of small plates and large plates. Furthermore, this causes Indonesia to be high potentially to earthquake hazards. The newest geological research published by Geophysical Research Letter (2016) shows the existence of Fault Kendeng, a fault stretches along 300 km from South Semarang, Central Java, to East Java with a movement of 0,05 millimeter per year [1]. As a result of its research, an evaluation using a non-linear time history analysis for structural buildings is necessary. The objective of this study is to evaluate structural buildings using a non-linear time history analysis. This study applies DSHA (Deterministic Seismic Hazard Analysis) method to obtain acceleration time history on bedrocks. Since the record of ground movement in Indonesia is limited, the attenuation function equation used to scale and match other country’s time acceleration history data. SSA (Site-Specific Analysis) is used to propagate earthquake acceleration from bedrocks to the surface. The earthquake acceleration on the surface generates as the earthquake load on the buildings. The results of Kendeng fault earthquake simulation using non-linear time history analysis shows that column members capacity is more robust than beam members capacity which the beam collapse mechanism occurs initially. From the maximum total drift ratio result, when the Kendeng fault earthquake occurs, the building structure performance level is at collapse prevention level Based on ATC-40 [2]. This research result shows that 96,7% of plastic hinge has not yielded. However, some elements are already damaged. Since most damage members are column, then it may require column strengthening to enhance maximum performance level at life safety condition category.

scholarly journals COMPARISON OF METHODS USED FOR SEISMIC ANALYSIS OF STRUCTURES

2017 ◽  
Vol 13 ◽  
pp. 20 ◽  
Author(s):  
Petr Čada ◽  
Jiří Máca
Keyword(s):  
Seismic Analysis ◽  
Linear Time ◽  
Dynamic Properties ◽  
Response Spectrum ◽  
Time History ◽  
Time History Analysis ◽  
Seismic Load ◽  
Eurocode 8 ◽  
History Analysis ◽  
Non Linear

This paper investigates effects of the seismic load to a structure. The article describes main methods of the definition and practical application of the seismic load based on the Standard Eurocode 8. There was made a comparison of all methods using the same structure. A simple two-storeyed concrete 2D-frame with fixed joints was chosen. A one another model with rigid beams for some calculations was defined. The second model can be used for hand-calculations as a cantilever with two masses. The paper describes main dynamic properties of the chosen structure. Seismic load was defined by lateral force method, modal response spectrum, non-linear time-history analysis and pushover analysis. The time-history analysis is represented by accelerograms. There were made linear and non-linear calculations.

Effects of Pier Stiffness on the Seismic Response of Continuous Bridges with Irregular Configuration

2014 ◽  
Vol 638-640 ◽  
pp. 1794-1802 ◽  
Author(s):  
Si Si Wei
Keyword(s):  
Seismic Response ◽  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
The Other ◽  
Relative Stiffness ◽  
History Analysis ◽  
Non Linear ◽  
Internal Forces

The seismic response of 4-span continuous bridges with different configurations has been investigated. In the series of bridges studied, the height of the central pier varies from 5 m to 100 m, while the heights of all the other piers remain the same. Using non-linear time history analysis, the internal forces at the bottom of individual piers have been predicted for each case. The correlation between the relative stiffness of adjacent piers and the ratio between the seismic response at the bottom of adjacent piers has been studied. Based on the results, in order to guarantee approximately balanced seismic response among all piers of a given bridge, a range of the relative column stiffness of two adjacent piers has been proposed.

Sign in / Sign up

Export Citation Format

Share Document