Adsorption of thallium ion (Tl+3) from aqueous solutions by rice husk in a fixed-bed column: Experiment and prediction of breakthrough curves

2018 ◽  
Vol 12 ◽  
pp. 1-13 ◽  
Author(s):  
Hayder A. Alalwan ◽  
Mohammad N. Abbas ◽  
Zaidun N. Abudi ◽  
Alaa H. Alminshid
Keyword(s):  
Aqueous Solutions ◽  
Rice Husk ◽  
Fixed Bed ◽  
Column Experiment ◽  
Breakthrough Curves ◽  
Fixed Bed Column

Fixed-Bed Column Study for the Removal of Ag(I)and Cr(III) from Aqueous Solutions Using Puffed Rice Husk

2011 ◽  
Vol 287-290 ◽  
pp. 1620-1625
Author(s):  
Yan Wu ◽  
Zai Fang Deng ◽  
Yang Tao ◽  
Xue Gang Luo
Keyword(s):  
Aqueous Solutions ◽  
Rice Husk ◽  
Flow Rate ◽  
Service Time ◽  
Fixed Bed ◽  
Breakthrough Curves ◽  
Model Parameters ◽  
Column Studies ◽  
Fixed Bed Column ◽  
Puffed Rice

Fixed-bed column studies for the removal of Ag(Ⅰ) and Cr(Ⅲ) from individual aqueous solutions using puffed rice husk were investigated in this work. The experiments were conducted to study the effect of important column parameters such as bed height, feed flow rate and feed initial concentration of solution. It was found that increasing bed depth yielded longer service time while increase in influent concentration and flow rate resulted in faster breakthrough. Bed Depth Service Time (BDST) model was applied to analyze the experimental data and the model parameters were evaluated. Good agreement of the experimental breakthrough curves with the model predictions was observed.

scholarly journals Magnetic Fe3O4@Chitosan Carbon Microbeads: Removal of Doxycycline from Aqueous Solutions through a Fixed Bed via Sequential Adsorption and Heterogeneous Fenton-Like Regeneration

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Bo Bai ◽  
Xiaohui Xu ◽  
Changchuan Li ◽  
Jianyu Xing ◽  
Honglun Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
High Efficiency ◽  
Low Cost ◽  
Fixed Bed ◽  
Breakthrough Curves ◽  
Chitosan Hydrogel ◽  
Fixed Bed Column ◽  
Adsorptive Removal ◽  
Sequential Adsorption ◽  
Cracking Process

The adsorptive removal of antibiotics from aqueous solutions is recognized as the most suitable approach due to its easy operation, low cost, nontoxic properties, and high efficiency. However, the conventional regeneration of saturated adsorbents is an expensive and time-consuming process in practical wastewater treatment. Herein, a scalable adsorbent of magnetic Fe3O4@chitosan carbon microbeads (MCM) was successfully prepared by embedding Fe3O4 nanoparticles into chitosan hydrogel via an alkali gelation-thermal cracking process. The application of MCM composites for the adsorptive removal of doxycycline (DC) was evaluated using a fixed-bed column. The results showed that pH, initial concentration, flow rate, and bed depth are found to be important factors to control the adsorption capacity of DC. The Thomas and Yoon-Nelson models showed a good agreement with the experimental data and could be applied for the prediction of the fixed-bed column properties and breakthrough curves. More importantly, the saturated fixed bed can be easily recycled by H2O2 which shows excellent reusability for the removal of doxycycline. Thus, the combination of the adsorption advantage of chitosan carbon with catalytic properties of magnetic Fe3O4 nanoparticles might provide a new tool for addressing water treatment challenges.

scholarly journals Adsorption of Azo Dye Methyl Orange from Aqueous Solutions Using Alkali-Activated Polypyrrole-Based Graphene Oxide

Molecules ◽  
2019 ◽  
Vol 24 (20) ◽  
pp. 3685 ◽  
Author(s):  
Abdulaziz Ali Alghamdi ◽  
Abdel-Basit Al-Odayni ◽  
Waseem Sharaf Saeed ◽  
Mohammed S. Almutairi ◽  
Fahad A. Alharthi ◽  
...  
Keyword(s):  
Methyl Orange ◽  
Aqueous Solutions ◽  
Physical Adsorption ◽  
Fixed Bed ◽  
Column Experiment ◽  
Morphological Properties ◽  
Fixed Bed Column ◽  
Rate Limiting Step ◽  
Pseudo Second Order ◽  
Polymeric Wastes

The adsorption of methyl orange (MO) from aqueous solutions onto a KOH-activated polypyrrole-based adsorbent (PACK) was investigated using batch and fixed-bed column techniques. The structural, thermal, and morphological properties of the PACK, analyzed by various methods, support its applicability as an adsorbent. An adsorption kinetic study revealed a preferably pseudo-second-order (R2 = 0.9996) and rate-limiting step controlled by both film and intra-particle diffusions. The thermodynamic adsorption tests resulted in negative ΔG°, ΔH°, and ΔS° values, which decreased as the temperature and concentration increased, indicating the spontaneous and exothermic adsorption over 25–45 °C. The adsorption isotherms fit the experimental data in the order of Langmuir ≈ Freundlich > Temkin, with evidence of adsorption operating well via the monolayer physical adsorption process, and maximum monolayer adsorption ranging from 520.8 to 497.5 mg/g. The breakthrough curve of the fixed-bed column experiment was modeled using the Thomas, Yoon–Nelson, and Hill models, resulting in an equilibrium capacity of 57.21 mg/g. A 73% MO recovery was achieved, indicating the possibility of column regeneration. Compared to other adsorbents reported, PACK had comparable or even superior capacity toward MO. For cost-effectiveness, similar nitrogen-containing polymeric wastes could be exploited to obtain such excellent materials for various applications.

scholarly journals Modeling of lead (II) adsorption on sodium hydroxide treated rice husk: Fixed-bed studies

2017 ◽  
Vol 13 (4) ◽  
pp. 803-806 ◽  
Author(s):  
Abdurrahman Garba ◽  
Hatijah Basri ◽  
Noor Shawal Nasri ◽  
Umar Hayatu Siddiq ◽  
Abdul Rasheed Abdul Rahman
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Rice Husk ◽  
Flow Rate ◽  
Adsorption Process ◽  
Lead Concentration ◽  
Fixed Bed ◽  
The Other ◽  
Fixed Bed Column

The treated rice husk has been evaluated as a sorbent for removing lead (II) from aqueous solutions in fixed-bed studies. In this paper, the effects of flow rate (3 and 9 mL/min), bed depth (0.9, 1.8 and 2.8 cm) and influent lead concentration of (5 and 20 mg/L) on the adsorption capacity of the adsorbent in a fixed-bed column were investigated. The highest adsorption capacity (78 %) on a 20 mg/L Pb (II) solution was achieved within a flow rate of 9 mL/min and a bed depth of 2.8 cm. The experimental data obtained from the adsorption process was correlated with the Thomas, Adams– Bohart and Yoon–Nelson models. The results of the parameters indicated Adams–Bohart model fitted well over the other models.

Biochar caged zirconium ferrite nanocomposites for the adsorptive removal of Reactive Blue 19 dye in a batch and column reactors and conditions optimizaton

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Shazia Perveen ◽  
Raziya Nadeem ◽  
Shaukat Ali ◽  
Yasir Jamil
Keyword(s):  
Experimental Data ◽  
Low Dose ◽  
Fixed Bed ◽  
Breakthrough Curves ◽  
Adsorption Efficiency ◽  
Fixed Bed Column ◽  
Flow Rates ◽  
Adsorptive Removal ◽  
Reactive Blue 19 ◽  
Pseudo Second Order

Abstract Biochar caged zirconium ferrite (BC-ZrFe2O5) nanocomposites were fabricated and their adsorption capacity for Reactive Blue 19 (RB19) dye was evaluated in a fixed-bed column and batch sorption mode. The adsorption of dye onto BC-ZrFe2O5 NCs followed pseudo-second-order kinetics (R 2 = 0.998) and among isotherms, the experimental data was best fitted to Sips model as compared to Freundlich and Langmuir isotherms models. The influence of flow-rate (3–5 mL min−1), inlet RB19 dye concentration (20–100 mg L−1) and quantity of BC-ZrFe2O5 NCs (0.5–1.5 g) on fixed-bed sorption was elucidated by Box-Behnken experimental design. The saturation times (C t /C o  = 0.95) and breakthrough (C t /C o  = 0.05) were higher at lower flow-rates and higher dose of BC-ZrFe2O5 NCs. The saturation times decreased, but breakthrough was increased with the initial RB19 dye concentration. The treated volume was higher at low sorbent dose and influent concentration. Fractional bed utilization (FBU) increased with RB19 dye concentration and flow rates at low dose of BC-ZrFe2O5 NCs. Yan model was fitted best to breakthrough curves data as compared to Bohart-Adams and Thomas models. Results revealed that BC-ZrFe2O5 nanocomposite has promising adsorption efficiency and could be used for the adsorption of dyes from textile effluents.

scholarly journals Acid red G dye removal from aqueous solutions by porous ceramsite produced from solid wastes: Batch and fixed-bed studies

2020 ◽  
Vol 9 (1) ◽  
pp. 770-782
Author(s):  
Tianpeng Li ◽  
Jing Fan ◽  
Tingting Sun
Keyword(s):  
Aqueous Solutions ◽  
Dye Removal ◽  
Coal Fly Ash ◽  
Exothermic Reaction ◽  
Fixed Bed ◽  
Column Experiment ◽  
Solid Wastes ◽  
Order Kinetic ◽  
Cost Effective Treatment ◽  
Acid Red G

AbstractA novel porous ceramsite was made of municipal sludge, coal fly ash, and river sediment by sintering process, and the performance of batch and fixed-bed column systems containing this material in the removal of acid red G (ARG) dye from aqueous solutions was assessed in this study. The results of orthogonal test showed that sintering temperature was the most important determinant in the preparation of porous ceramsite, and it possesses developed pore structure and high specific surface area. Batch experiment results indicated that the adsorption process of ARG dye toward porous ceramsite was a spontaneous exothermic reaction, which could be better described with Freundlich–Langmuir isotherm model (R2 > 0.992) and basically followed the pseudo-first-order kinetic equation (R2 > 0.993). Column experiment results showed that when the porous ceramsite was used as packing material, its adsorption capacity was roughly improved by 3.5 times compared with that in batch system, and the breakthrough behavior was simulated well with Yoon–Nelson model, with R2 > 0.954. This study suggested that the novelty man-made porous ceramsite obtained from solid wastes might be processed as a certain cost-effective treatment material fit for the dye removal in aqueous solutions.

Adsorption of Methylene Blue from Solution by Natural Zeolite in Fixed-Bed Column: Effect of Bed Depth

2012 ◽  
Vol 518-523 ◽  
pp. 3115-3119
Author(s):  
Yan Qiang Li ◽  
Xiao Feng Ren ◽  
Shao Hua Chen ◽  
Xiu Rong Zhao ◽  
Run Ping Han
Keyword(s):  
Methylene Blue ◽  
Natural Zeolite ◽  
Fixed Bed ◽  
Breakthrough Curves ◽  
Form Solution ◽  
Column Height ◽  
Nonlinear Regression Analysis ◽  
Adsorption Ability ◽  
Fixed Bed Column ◽  
Linear And Nonlinear

The effect of bed depth on adsorption ability of natural zeolite to removal methylene blue (MB) from aqueous solution in the fixed-bed column was studied. The results showed that the increase in column height favored the MB removal form solution. The equilibrium uptake of MB onto unit mass zeolite increased with the bed depth growth. The experimental data were fitted to Yan model using linear and nonlinear regression analysis, respectively. The experimental points and the predicted curves using the Yan model were compared and the error analysis was performed. The results indicated that Yan model were good to predict the breakthrough curves and both two methods can be used to obtain the parameters of Yan model and to predict the breakthrough curves.

Sign in / Sign up

Export Citation Format

Share Document