scholarly journals Using passive cooling strategies to improve thermal performance and reduce energy consumption of residential buildings in U.A.E. buildings

2014 ◽  
Vol 3 (2) ◽  
pp. 154-165 ◽  
Author(s):  
Hanan M. Taleb
2018 ◽  
Vol 15 (2) ◽  
pp. 29 ◽  
Author(s):  
Nasser Al-Azri ◽  
Saleh Al-Saadi

Typical meteorological years (TMYs) are widely used for the analysis and simulation of energy-intensive systems. The reliability of a developed typical year depends on the accuracy of the historical record of weather data as well as the fitness of the developed approach to the application. In this work, a TMY for Seeb area in the Muscat Governorate, Oman was developed using different approaches. The developed TMYs are compared to the current commonly used TMY which is based on 1985-2001 records that have many gaps and anomalies and hence have intensive interpolation treatment. The different TMYs were compared by simulating energy consumption of a typical residential building and also by studying applicability of passive cooling strategies. The findings showed that the variation in energy consumption is minimal for the different TMY development approaches for the same set of historical records but the difference is very significant when the comparison is based on the two sets from the two periods of records.


2020 ◽  
Vol 15 (4) ◽  
pp. 555-564
Author(s):  
Laila Amer Hashem Al-Qahtani ◽  
Lamis Saad Eldeen Elgizawi

Abstract Around the world, most energy is consumed by buildings; residential buildings consume 40% of energy globally. In the Kingdom of Saudi Arabia (KSA), buildings consume 50% of all energy, and 70% of the buildings in the KSA are not insulated well. Creating an envelope is a key to decreasing energy consumption and providing thermal comfort and healthy internal spaces. Thus, the main aim of this study is to test the effect of selected passive cooling strategies by using a simulation program to evaluate a variety of envelope (floor, external and internal walls and roofs) thermal characteristic proposals to create an eco-interior space, to provide the most comfortable conditions for users and to save energy in buildings in hot climates in Riyadh, Saudi Arabia. One residential building case was selected, and some of the passive cooling strategies were tested. Simulation software—Design Builder—was used to calculate the total energy consumption in 1 year and compare the results before and after applying these strategies to the selected residential building.


2018 ◽  
Vol 15 (2) ◽  
pp. 129
Author(s):  
Nasser Al-Azri ◽  
Saleh Al-Saadi

Typical meteorological years (TMYs) are widely used for the analysis and simulation of energy-intensive systems. The reliability of a developed typical year depends on the accuracy of the historical record of weather data as well as the fitness of the developed approach to the application. In this work, a TMY for Seeb area in the Muscat Governorate, Oman was developed using different approaches. The developed TMYs are compared to the current commonly used TMY which is based on 1985-2001 records that have many gaps and anomalies and hence have intensive interpolation treatment. The different TMYs were compared by simulating energy consumption of a typical residential building and also by studying applicability of passive cooling strategies. The findings showed that the variation in energy consumption is minimal for the different TMY development approaches for the same set of historical records but the difference is very significant when the comparison is based on the two sets from the two periods of records.


2018 ◽  
Vol 49 ◽  
pp. 00068 ◽  
Author(s):  
Piotr Lis

In the face of a constant increase in demand for energy, one of the important sources will be its saving and efficient use. The search for the greatest opportunities in this area should focus on the areas where the highest energy consumption occurs. The dominant role here is played by the communal and living sector, to the extent that it is the sub-sector of buildings with a majority share of residential buildings. The article presents the expected energy effects of measures reducing energy consumption for heating residential buildings in the whole country. The author used statistical data of the Central Statistical Office available in the database of this institution. These data were identified and searched for as suitable for the purposes of this article and were used as a basis for calculations and analyses. The calculations show that only thanks to simple actions such as improvement of thermal insulation of envelope components it is possible to reduce energy consumption for heating of residential buildings by over 70% in relation to the situation in 2011. The potential energy effect will also translate into an economic and environmental effect. Qualitative measures such as improving the performance of the heating and ventilation system of a building and/or changing the energy carrier will also reduce energy consumption for this purpose, but they are not the subject of this study.


2012 ◽  
Vol 598 ◽  
pp. 49-52
Author(s):  
Hong Tao Zhou

Measure the temperature of exterior window and surrounding walls’ inner surface, and measure interior air temperature to analyze the effect, which was brought to building energy consumption and interior thermal conditions by the exterior window of the building; studied several details of exterior window design, and proposes a method, which is separately controlling the heat-transfer coefficient according to different orientation, room’s positions and room’s functions while designing the exterior windows, in order to improve the interior thermal conditions and reduce energy consumption of the residential buildings.


2019 ◽  
Vol 8 (1) ◽  
Author(s):  
Salah M Alabani ◽  
Ibrahim H Tawil

The residential sector in Libya has grown over the past decade in the construction of residential buildings due to the increase in the population. Moreover, the increase in the level of income has contributed to the increase in the purchase of household appliances, which leads to increased demand for energy. Energy consumption in the household sector accounted for 31% of total energy consumption during 2010, and the share of air conditioners in this sector consumed 18.35%. To reduce energy consumption and improve energy efficiency in this sector, policies should be considered to apply energy efficiency standards and markers to household electrical appliances, as they are considered one of the most successful programs used in the world. Countries are implementing such programs to reduce energy consumption in the domestic sector. This paper presents the possibility of implementing such programs to introduce the importance of energy efficiency standards and labeling programs for home appliances in Libya. The calculations required to design such programs show the energy savings that can be achieved during cooling loads in the summer period of 4 months July, August, September). A strategic plan has been developed during 10-year (2020-2030) to estimate the expected savings of energy consumed and to identify possible obstacles and difficulties by gradually increasing the energy efficiency ratio for comestic air conditioners in two stages, from EER10 to EER11 in the first stage is then raised to EER12 as the second stage.


Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6007
Author(s):  
Dorota Chwieduk ◽  
Wojciech Bujalski ◽  
Bartosz Chwieduk

The main aim of this paper is to evaluate the possible transition routes from the existing centralized energy systems in Polish cities to modern low-emission distributed energy systems based on locally available energy sources, mainly solar energy. To evaluate these possibilities, this paper first presents the current structure of energy grids and heating networks in Polish cities. A basic review of energy consumption in the building sector is given, with emphasis on residential buildings. This paper deals with the evaluation of the effectiveness of operation of central district heating systems and heat distribution systems; predicts the improvement in the effectiveness of the energy production, distribution, and use; and analyzes the possible integration of the existing system with distributed energy sources. The possibility of the introduction of photovoltaic (PV) systems to reduce energy consumption by residential buildings in a big city (Warsaw) is analyzed. It is assumed that some residential buildings, selected because of their good solar insolation conditions, can be equipped with new PV installations. Electricity produced by the PV systems can be used on site and/or transferred to the grid. PV energy can be used not only for lighting and electrical appliances in homes but also to drive micro- and small-scale heat pumps. It is assumed that the PV modules are located on roofs of residential buildings and are treated as individual micro scale energy systems of installed capacity not larger than 50 kW for each of the buildings. In such a case, the micro energy system can use the grid as a virtual electricity store of 70% or 80% efficiency and can produce and transfer electricity using a net-metering scheme. The results show that the application of micro-scale PV systems would help residential buildings to be more energy efficient, reduce energy consumption based on fossil fuels significantly, and even if the grid cannot be used as a virtual electricity store then the direct self-consumption of buildings can reduce their energy consumption by 30% on average. Development of micro-scale PV systems seems to be one of the most efficient options for a quick transformation of the centralized energy system in large Polish cities to a distributed energy one based on individual renewable energy sources.


2021 ◽  
Author(s):  
◽  
Alamah Misni

<p><b>Increasing energy consumption is having a detrimental effect on the environment. This issue combined with rising energy costs, is motivating people to reduce energy consumption. Moderating a building’s surrounding microclimate naturally through strategic landscaping has the potential to benefit the environment, save energy, save money and provide comfortable living environments.</b></p> <p>The urban heat island effect is a well documented phenomenon, which influences the climate of most of the major cities around the world. It occurs when the air temperature in densely built urban areas is higher by 2°C to 8°C compared to the temperature of the surrounding rural environment. This issue is of particular concern in tropical areas, which experience high temperatures and humidity all year round. In these areas, solar heat passes through a building’s envelope via glazed windows and the walls and roofs resulting in uncomfortable interior spaces. The increased purchasing power of the population has resulted in greater use of air-conditioners to create and maintain a comfortable indoor temperature. This study found that the average household uses up to 37% of their electricity consumption for cooling. Careful planning of exterior spaces can help reduce energy consumption for cooling by reducing the adverse impact of some climatic factors. Strategically placed vegetation around a building has long been recognised as a means of cooling. It can reduce temperatures and humidity through shading, evapotranspiration and wind channelling.</p> <p>The aim of this study was to examine and quantify the relationship between surrounding vegetation, and the thermal performance of housing in a hot-humid tropical environment. The primary objective was to determine the energy saving potential of vegetation for the tropical residence. The secondary objective was to investigate the effect of vegetation on modifying the outdoor temperature around a single-family house in a hot-humid climate.</p> <p>Monitoring of household electricity use in the two Malaysian cities, Shah Alam and Putrajaya, has shown that at night time, when families are at home, is when airconditioning is used the most. Building surfaces on the east and west side are most affected by the sun, gaining and storing heat throughout the day until night time, when it is released into the house as the outdoor temperatures cool. Planting the right species, size and shape of trees, shrubs, vines, groundcover, and turf in strategic positions around a garden can greatly reduce the temperature around buildings. This in turn reduces the energy used for air conditioning. This study found that strategic landscaping, which resulted in shading and encouraged evapotranspiration and wind channelling, could reduce electricity use and costs by as much as 20%. The physical characteristics of buildings including their construction, size and age, combined with their landscape designs were looked at in 50 private houses in Malaysia. Measurements were taken from several outdoor and indoor locations around the houses. The findings showed that strategic design of landscaping could reduce heat build-up in a house, by shading, evapotranspiration and wind channelling by as much as 4°C for the exterior and 3°C for the interior spaces.</p> <p>These results demonstrate how strategic landscaping can assist in creating a favourable microclimate in a house, which will help reduce energy consumption. Its effect can extend beyond the residential to have a positive influence on an area’s macroclimate and at a regional scale.</p>


Sign in / Sign up

Export Citation Format

Share Document