Preparation and characterization of concentrated γ-Oryzanol nanodispersions by solvent displacement method: Effect of processing conditions on nanoparticles formation

2022 ◽  
Vol 123 ◽  
pp. 107161
Author(s):  
Noamane Taarji ◽  
Meryem Bouhoute ◽  
Isao Kobayashi ◽  
Kenichi Tominaga ◽  
Hiroko Isoda ◽  
...  
RSC Advances ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 2226-2234
Author(s):  
Ana María Pineda-Reyes ◽  
Mauricio Hernández Delgado ◽  
María de la Luz Zambrano-Zaragoza ◽  
Gerardo Leyva-Gómez ◽  
Nestor Mendoza-Muñoz ◽  
...  

A novel solvent emulsification-displacement method for obtaining polystyrene nanoparticles is reported. This process has an added value and can be an alternative for the recycling of expanded polystyrene.


2009 ◽  
Vol 1228 ◽  
Author(s):  
Hao Wang ◽  
Greg C. Hartman ◽  
Joshua Williams ◽  
Jennifer L. Gray

AbstractThere are many factors that have the potential to limit significant advances in device technology. These include the ability to arrange materials at shrinking dimensions and the ability to successfully integrate new materials with better properties or new functionalities. To overcome these limitations, the development of advanced processing methods that can organize various combinations of materials at nano-scale dimensions with the necessary quality and reliability is required. We have explored using a gallium focused ion beam (FIB) as a method of integrating highly mismatched materials with silicon by creating template patterns directly on Si with nanoscale resolution. These templates are potentially useful as a means of locally controlling topography at nanoscale dimensions or as a means of locally implanting Ga at specific surface sites. We have annealed these templates in vacuum to study the effects of ion dosage on local Ga concentration and topography. We have also investigated the feasibility of creating Ga nanodots using this method that could eventually be converted to GaN through a nitridation process. Atomic force microscopy and electron microscopy characterization of the resulting structures are shown for a variety of patterning and processing conditions.


Author(s):  
J. Vanterpool ◽  
O. J. Ilegbusi ◽  
N. Khatami

This paper describes experimental investigation of thermal and combustion phenomena as well as structure for self-propagating combustion synthesis of porous Ni–Ti intermetallic aimed for structural biomedical application. The objective is to correlate processing conditions with structure for the porous material. Ni–Ti mixture is prepared from elemental powders of Ni and Ti. The mixture is pressed into solid cylindrical samples of 1.1 cm diameter and 2–3 cm length, with initial porosity ranging from 30% to 42%. The samples are preheated to various initial temperatures and ignited from the top surface such that the flame propagates axially downwards. The flame images are recorded with a motion camera as well as the temperature profile. The samples were then cut using a diamond saw in both longitudinal and latitudinal directions. Image analysis software was then used to analyze the porosity distribution in each sample. The porosity distribution was then systematically correlated with the input processing conditions.


2019 ◽  
Vol 3 (7) ◽  
pp. 1375-1384 ◽  
Author(s):  
Eshu Middha ◽  
Purnima Naresh Manghnani ◽  
Denise Zi Ling Ng ◽  
Huan Chen ◽  
Saif A. Khan ◽  
...  

We report a new enhanced solvent displacement method for the synthesis of highly monodisperse nanoparticles with direct visualization of the ouzo zone.


Microbiology ◽  
2010 ◽  
Vol 156 (7) ◽  
pp. 2035-2045 ◽  
Author(s):  
Claudia Picozzi ◽  
Gaia Bonacina ◽  
Ileana Vigentini ◽  
Roberto Foschino

Lactobacillus sanfranciscensis is a lactic acid bacterium that characterizes the sourdough environment. The genetic differences of 24 strains isolated in different years from sourdoughs, mostly collected in Italy, were examined and compared by PFGE and multilocus sequence typing (MLST). The MLST scheme, based on the analysis of six housekeeping genes (gdh, gyrA, mapA, nox, pgmA and pta) was developed for this study. PFGE with the restriction enzyme ApaI proved to have higher discriminatory power, since it revealed 22 different pulsotypes, while 19 sequence types were recognized through MLST analysis. Notably, restriction profiles generated from three isolates collected from the same firm but in three consecutive years clustered in a single pulsotype and showed the same sequence type, emphasizing the fact that the main factors affecting the dominance of a strain are correlated with processing conditions and the manufacturing environment rather than the geographical area. All results indicated a limited recombination among genes and the presence of a clonal population in L. sanfranciscensis. The MLST scheme proposed in this work can be considered a useful tool for characterization of isolates and for in-depth examination of the strain diversity and evolution of this species.


2008 ◽  
Vol 22 (1) ◽  
pp. 12-17 ◽  
Author(s):  
Henelyta S. Ribeiro ◽  
Boon-Seang Chu ◽  
Sosaku Ichikawa ◽  
Mitsutoshi Nakajima

2016 ◽  
Vol 8 (12) ◽  
pp. 1001-1006 ◽  
Author(s):  
A. S. Aravind Ram ◽  
D. V. Gowda ◽  
Atul Srivastava ◽  
Riyaz AliM. Osmani ◽  
M. P. Gowrav

Sign in / Sign up

Export Citation Format

Share Document