Simulations for practical measurement methods of spatial neutron distribution inside blanket mock-up irradiated with DT neutrons

2021 ◽  
Vol 168 ◽  
pp. 112417
Author(s):  
Yasuyuki Ogino ◽  
Keisuke Mukai ◽  
Juro Yagi ◽  
Satoshi Konishi
Keyword(s):  
Measurement Methods ◽  
Neutron Distribution ◽  
Practical Measurement

scholarly journals Measurements of transverse section wear of rails in tracks of tram-loop

2019 ◽  
Vol 2019 (6) ◽  
pp. 1-10
Author(s):  
Jacek Makuch
Keyword(s):  
Transverse Section ◽  
Electronic Devices ◽  
Measurement Methods ◽  
New Techniques ◽  
Track Width ◽  
Rail Wear ◽  
Width Measurements ◽  
Practical Measurement

In article the problems of classical methods of transverse section wear of rails replacement with new techniques based on electronic devices was concerned. Reasons of rails shape section changes were defined. Principles of rails waste inspection resulting from regulations were reminded. Review of practical measurement methods and devices were made. Shapes of nominal sections of rails used in tram tracks were analyzed. Realization of measurements executed with mechanical-electronic profile gauge and mechanical track gauge on tram-loop Sępolno in Wrocław were described. Proposal of graphic manner analysis of rail wear measurements in connection with track width measurements were proposed. In summary conclusions from effected investigations were formulated.

A critical comparison of selected implicit measurement methods.

2018 ◽  
Vol 11 (4) ◽  
pp. 249-266 ◽  
Author(s):  
Judith Znanewitz ◽  
Lisa Braun ◽  
David Hensel ◽  
Claudia Fantapié Altobelli ◽  
Fabian Hattke
Keyword(s):  
Measurement Methods ◽  
Critical Comparison ◽  
Implicit Measurement

Calibration of a Lyophilized Pooled Plasma as Candidate Reference Plasma for Standardization of the Prothrombin Time Ratio

1993 ◽  
Vol 13 (02) ◽  
pp. 96-105 ◽  
Author(s):  
H. Beeser ◽  
U. Becker ◽  
H. J. Kolde ◽  
E. Spanuth ◽  
P. Witt ◽  
...  
Keyword(s):  
Prothrombin Time ◽  
International Study ◽  
International Normalized Ratio ◽  
Measurement Methods ◽  
Factor V ◽  
Diagnostic Instruments ◽  
Plasma Pool ◽  
Normal Plasma ◽  
German Association ◽  
Prothrombin Time Ratio

SummaryThe prothrombin time (PT), obtained from a fresh normal plasma pool (FPP), is the basis both for the establishment of the 100% activity (normal plasma) and for the ratio calculation used in the International Normalized Ratio (INR) according to the recommendations of the ICSH/ICTH (6). Today the PT of lyophilized normal plasma pools are successfully used as reference for the assessment of samples in proficiency studies. However, a lack of comparability is to be recognized. Therefore the Committee of Hematology of the German Association of Diagnostics’ and Diagnostic Instruments’ Manufacturers (VDGH) decided to produce a candidate reference plasma (VDGH Reference Plasma) which was calibrated against fresh normal plasma pools in an international study.The basic calibration was performed by using the same certified BCR thromboplastin (BCT/099) by all participants. The endpoint was determined manually and by using the coagulometer Schnitger-Gross. In additional testings each participant used his own routine thromboplastins and methods. Calculating the ratio [PT VDGH Reference Plasma (sec)/PT fresh normal plasma pool (sec)] the VDGH Reference Plasma showed a deviation from the average fresh normal plasma pool of 1.05 both with the BCT/099 and with all thromboplastins. There were obtained some statistical differences between “plain” and “combined’’ (added factor V and fibrinogen) thromboplastins. No statistical difference was found between the different endpoint measurement methods (manual, mechanical, optical).In spite of these statistical deviations the VDGH Reference Plasma can be used for the standardization of the PT-normal (100%) value with different ratios for plain (1.06) and combined (1.02) thromboplastins. The manufacturers will use this VDGH Reference Plasma for the calibration of their commercially available calibration plasmas, which allows the user of such a material to calculate a calibrated 100% PT value.

Defining and assessing walkability: a concept for an integrated approach using surveys, biosensors and geospatial analysis

2019 ◽  
Vol 62 (1) ◽  
pp. 5-15 ◽  
Author(s):  
Linda Dörrzapf ◽  
Anna Kovács-Győri ◽  
Bernd Resch ◽  
Peter Zeile
Keyword(s):  
Spatial Planning ◽  
Recent Literature ◽  
Integrated Approach ◽  
Measurement Methods ◽  
Transport Mode ◽  
Positive Effects ◽  
Spatial Environment ◽  
Planning Processes ◽  
Valuable Complement ◽  
Definition Of

AbstractWalking as a transport mode is still often underrepresented in the overall transport system. Consequently, pedestrian mobility is usually not recorded statistically in the same manner as it is performed for motorised traffic which leads to an underestimation of its importance and positive effects on people and cities. However, the integration of walkability assessments is potentially a valuable complement in urban planning processes through considering important quantitative and qualitative aspects of walking in cities. Recent literature shows a variety of approaches involving discrepancies in the definition of walkability, the factors which contribute to it, and methods of assessing them. This paper provides a new understanding of the concept of walkability in the European context. Our approach relies on the extension of methodological competence in transportation, spatial planning and geography by linking new measurement methods for evaluating walkability. We propose an integrated approach to assessing walkability in a comprehensive methodology that combines existing qualitative and GIS-based methods with biosensor technologies and thus captures the perceptions and emotions of pedestrians. This results in an increased plausibility and relevance of the results of walkability analysis by considering the spatial environment and its effect on people.

Sign in / Sign up

Export Citation Format

Share Document