scholarly journals Prediction of perforation into concrete accounting for saturation ratio influence at high confinement

Author(s):  
J. Baroth ◽  
M. Briffaut ◽  
D. Vu ◽  
Y. Malecot ◽  
L. Daudeville
Keyword(s):  
2013 ◽  
Vol 864-867 ◽  
pp. 1923-1928
Author(s):  
Yue Xu ◽  
Jian Xi Li ◽  
Li Li Kan

A new kind of high strength cementitious material is made from phosphogypsum (PG), active carbon and fly-ash. Through the orthogonal research, it was showed that the calcination temperature, retention time, dosage of active carbon and fly ash on the compressive strength of cementitious binder are the most important. The result also showed that, in the conditions of temperature 1200°C, time retention 30 min, dosage of active carbon 10%, dosage of fly ash 5%, the compressive strength of the cementitious material for 3d and 28d could reach to 46.35MPa and 92.70MPa, the content of sulfur trioxide was 11.60% accordingly. A lot of active mineral materials, such as dicalcium silicate, tricalcium silicate, tricalcium aluminate were formed in the calcination. The C-S-H gel, calcium hydroxide and ettringite were found in 3d and 28d hydrates. It is found that the lime saturation ratio and silica modulus need to be control between 0.40~0.65 and 4~8 in order to produce high strength cementitious material.


2009 ◽  
Vol 46 (5) ◽  
pp. 1105-1120 ◽  
Author(s):  
Xuan Hong Vu ◽  
Yann Malecot ◽  
Laurent Daudeville ◽  
Eric Buzaud

2005 ◽  
Vol 5 (12) ◽  
pp. 3277-3287 ◽  
Author(s):  
P. Vaattovaara ◽  
M. Räsänen ◽  
T. Kühn ◽  
J. Joutsensaari ◽  
A. Laaksonen

Abstract. New particle formation and growth has a very important role in many climate processes. However, the overall knowlegde of the chemical composition of atmospheric nucleation mode (particle diameter, d<20 nm) and the lower end of Aitken mode particles (d≤50 nm) is still insufficient. In this work, we have applied the UFO-TDMA (ultrafine organic tandem differential mobility analyzer) method to shed light on the presence of an organic fraction in the nucleation mode size class in different atmospheric environments. The basic principle of the organic fraction detection is based on our laboratory UFO-TDMA measurements with organic and inorganic compounds. Our laboratory measurements indicate that the usefulness of the UFO-TDMA in the field experiments would arise especially from the fact that atmospherically the most relevant inorganic compounds do not grow in subsaturated ethanol vapor, when particle size is 10 nm in diameter and saturation ratio is about 86% or below it. Furthermore, internally mixed particles composed of ammonium bisulfate and sulfuric acid with sulfuric acid mass fraction ≤33% show no growth at 85% saturation ratio. In contrast, 10 nm particles composed of various oxidized organic compounds of atmospheric relevance are able to grow in those conditions. These discoveries indicate that it is possible to detect the presence of organics in atmospheric nucleation mode sized particles using the UFO-TDMA method. In the future, the UFO-TDMA is expected to be an important aid to describe the composition of atmospheric newly-formed particles.


2012 ◽  
Vol 586 ◽  
pp. 50-57
Author(s):  
Yang Huan Zhang ◽  
Tai Yang ◽  
Hong Wei Shang ◽  
Guo Fang Zhang ◽  
Xia Li ◽  
...  

In order to obtain a nanocrystalline and amorphous structure, the Mg20Ni8M2 (M=Cu, Co) hydrogen storage alloys were fabricated by the melt spinning technology. The microstructures of the alloys were characterized by XRD, SEM and HRTEM. The effects of the melt spinning on the hydriding and dehydriding kinetics of the alloys were investigated. The results indicate that the as-spun (M=Cu) alloys hold an entire nanocrystalline structure even if the limited spinning rate is applied, while the as-spun (M=Co) alloys display a nanocrystalline and amorphous structure as the spinning rate grows to 30 m/s, suggesting that the substitution of Co for Ni facilitates the glass formation in the Mg2Ni-type alloy. The melt spinning remarkably improves the gaseous hydriding and dehydriding kinetics of the alloys. As the spinning rate grows from 0 (As-cast was defined as the spinning rate of 0 m/s) to 30 m/s, the hydrogen absorption saturation ratio ( ) is enhanced from 56.72% to 92.74% for the (M=Cu) alloy and from 80.43% to 94.38% for the (M=Co) alloy. The hydrogen desorption ratio ( ) is raised from14.89% to 40.37% for the (M=Cu) alloy and from 24.52% to 51.67% for the (M=Co) alloy.


RSC Advances ◽  
2015 ◽  
Vol 5 (7) ◽  
pp. 5192-5196 ◽  
Author(s):  
Sin-Hui Wang ◽  
Shin Liu ◽  
Shoou-Jinn Chang ◽  
Tsung-Ying Tsai ◽  
Cheng-Liang Hsu

In–In2O3 composite nanopagodas demonstrate excellent field emission properties with an enhanced kinetics factor (saturation ratio).


Author(s):  
Yasushi SUZUKI ◽  
Yoshiaki TOBA ◽  
Naoya SUZUKI ◽  
Satoru KOMORI

2014 ◽  
Vol 11 (6) ◽  
pp. 9667-9695 ◽  
Author(s):  
C. M. White ◽  
A. R. Kemanian ◽  
J. P. Kaye

Abstract. Carbon (C) saturation theory suggests that soils have a~limited capacity to stabilize organic C and that this capacity may be regulated by intrinsic soil properties such as clay content and mineralogy. While C saturation theory has advanced our ability to predict soil C stabilization, we only have a weak understanding of how C saturation affects N cycling. In biogeochemical models, C and N cycling are tightly coupled, with C decomposition and respiration driving N mineralization. Thus, changing model structures from non-saturation to C saturation dynamics can change simulated N dynamics. Carbon saturation models proposed in the literature calculate a theoretical maximum C storage capacity of saturating pools based on intrinsic soil properties, such as clay content. The extent to which current C stocks fill the storage capacity of the pool is termed the C saturation ratio, and this ratio is used to regulate either the efficiency or the rate of C transfer from donor to receiving pools. In this study, we evaluated how the method of implementing C saturation and the number of pools in a model affected net N mineralization from decomposing plant residues. In models that use the C saturation ratio to regulate transfer efficiency, C saturation affected N mineralization, while in those in which the C saturation ratio regulates transfer rates, N mineralization was independent of C saturation. When C saturation ratio regulates transfer efficiency, as the saturation ratio increases, the threshold C : N ratio at which positive net N mineralization occurs also increases because more of the C in the residue is respired. In a single-pool model where C saturation ratio regulated the transfer efficiency, predictions of N mineralization from residue inputs were unrealistically high, missing the cycle of N immobilization and mineralization typically seen after the addition of high C : N inputs to soils. A more realistic simulation of N mineralization was achieved simply by adding a second pool to the model to represent short-term storage and turnover of C and N in microbial biomass. These findings increase our understanding of how to couple C saturation and N mineralization models, while offering new hypotheses about the relationship between C saturation and N mineralization that can be tested empirically.


2007 ◽  
Vol 7 (3) ◽  
pp. 7535-7567
Author(s):  
J. Lauros ◽  
E. D. Nilsson ◽  
M. Dal Maso ◽  
M. Kulmala

Abstract. The connection between new particle formation and micro- and mesoscale meteorology was studied based on measurements at SMEAR II station in Southern Finland. We analyzed turbulent conditions described by sodar measurements and utilized these combined with surface layer measurements and a simple model to estimate the upper boundary layer conditions. Turbulence was significantly stronger on particle formation days and the organic vapor saturation ratio increase due to large eddies was stronger on event than nonevent days. We examined which variables could be the best indicators of new particle formation and concluded that the formation probability depended on the condensation sink and temporal temperature change at the top of the atmospheric boundary layer. Humidity and heat flux may also be good indicators for particle formation.


2019 ◽  
Vol 70 (11) ◽  
pp. 4086-4088

The present paper presents results concerning on structure, magnetic properties and magnetization reversal processes in the as-cast Pr8Dy1Fe60Co7Mn6B14Zr1Ti3 alloy in the form of 1 mm plate. The XRD studies revealed coexistence of three phases dominant Pr2(Fe,Co)14B and minor á-Fe and Fe3B. The remanence-to-saturation ratio Jr/Js equaled 0.66 and indicated on existence of strong exchange interactions between hard and soft magnetic phases. The analysis of Mrev vs. Mirr dependences, the pinning mechanism was detected in studied alloy. Keywords: bulk alloys, magnetic properties, magnetization reversal processes


Sign in / Sign up

Export Citation Format

Share Document