scholarly journals Investigating the critical characteristics of thermal runaway process for LiFePO4/graphite batteries by a ceased segmented method

iScience ◽  
2021 ◽  
pp. 103088
Author(s):  
Xuan Tang ◽  
Guangxu Zhang ◽  
Xueyuan Wang ◽  
Gang Wei ◽  
Guangshuai Han ◽  
...  
Author(s):  
James B. Robinson ◽  
Donal P. Finegan ◽  
Thomas M. M. Heenan ◽  
Katherine Smith ◽  
Emma Kendrick ◽  
...  

Thermal runaway is a phenomenon that occurs due to self-sustaining reactions within batteries at elevated temperatures resulting in catastrophic failure. Here, the thermal runaway process is studied for a Li-ion and Na-ion pouch cells of similar energy density (10.5 Wh, 12 Wh, respectively) using accelerating rate calorimetry (ARC). Both cells were constructed with a z-fold configuration, with a standard shutdown separator in the Li-ion and a low-cost polypropylene (PP) separator in the Na-ion. Even with the shutdown separator, it is shown that the self-heating rate and rate of thermal runaway in Na-ion cells is significantly slower than that observed in Li-ion systems. The thermal runaway event initiates at a higher temperature in Na-ion cells. The effect of thermal runaway on the architecture of the cells is examined using X-ray microcomputed tomography, and scanning electron microscopy (SEM) is used to examine the failed electrodes of both cells. Finally, from examination of the respective electrodes, likely due to the carbonate solvent containing electrolyte, it is suggested that thermal runaway in Na-ion batteries (NIBs) occurs via a similar mechanism to that reported for Li-ion cells.


2020 ◽  
Author(s):  
Tang Xuan ◽  
Xueyuan Wang ◽  
Haifeng Dai ◽  
Jun Sun ◽  
Guangxu Zhang ◽  
...  

Author(s):  
Fei Gao ◽  
Maosong Fan ◽  
Congjie Wang ◽  
Wei Liu ◽  
Yanli Zhu

Author(s):  
Dongxu Ouyang ◽  
Jingwen Weng ◽  
Mingyi Chen ◽  
Jian Wang

Abstract The present work carries out a series of thermal runaway experiments to explore the impact of charging and charging rate on the thermal runaway behaviors of lithium-ion cells, in which five charging rates (0C, 0.5C, 1C, 2C and 4C) and three initial states of charge (SOC), i.e. 25%, 50% and 75% are included. The thermal runaway process of 18650 lithium-ion cells induced by over-heating usually consists of seven stages, and is accompanied with high-temperature, fire and toxicity risks. The internal morphology of cells and the micro features of cell materials are seriously damaged after thermal runaway. Charging aggravates the thermal runaway behavior of cells, which is further exhibited as the earlier occurrence of safety vent opening, gas releasing and thermal runaway. Moreover, the severity deteriorates as the charging rate increases (the larger the charging rate, the earlier and more severe the thermal runway), which may be ascribed to the growth of cell SOC and the decline of cell stability under charging. This phenomenon is especially apparent for the cell with a high initial SOC where a more dramatic-rising α (the advancement ratio of critical times for thermal runaway due to charging) is observed.


Sign in / Sign up

Export Citation Format

Share Document