Directional coarsening behavior of primary γ′ phase in Ni3Al-based superalloy during aging heat treatment

2021 ◽  
Vol 872 ◽  
pp. 159674
Author(s):  
Xin He ◽  
Chang Liu ◽  
Yikai Yang ◽  
Jian Ding ◽  
Xueguang Chen ◽  
...  
2016 ◽  
Vol 35 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Zhiyuan Liang ◽  
Wanhua Sha ◽  
Qinxin Zhao ◽  
Chongbin Wang ◽  
Jianyong Wang ◽  
...  

AbstractThe effect of aging heat treatment on the microstructure and mechanical properties of 10Cr20Ni25Mo1.5NbN austenitic steel was investigated in this article. The microstructure was characterized by scanning electron microscopy, energy dispersive spectrometry and transmission electron microscopy. Results show that the microstructure of 10Cr20Ni25Mo1.5NbN austenitic is composed of austenite. This steel was strengthened by precipitates of secondary phases that were mainly M23C6 carbides and NbCrN nitrides. As aging treatment time increased, the tensile strength first rose (0–3,000 h) and then fell (3,000–5,000 h) due to the decrease of high density of dislocations. The impact absorbed energy decreased sharply, causing the sulfides to precipitate at the grain boundary. Therefore, the content of sulfur should be strictly controlled in the steelmaking process.


Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 819
Author(s):  
Changsheng Li ◽  
Kun Li ◽  
Jingbo Dong ◽  
Jinyi Ren ◽  
Yanlei Song

The effect of aging on the precipitates, mechanical and magnetic properties of Fe-21Cr-15Ni-6Mn-Nb low magnetic stainless steel were investigated. The steel was aged at 550–750 °C for 2 h after solution heat treatment at 1100 °C for 1 h. During the aging treatment, the (Nb, V)(C, N) particles gradually precipitated in the grain, which were coherent or semi-coherent with the matrix. When the aging temperature was beyond 650 °C, the coarsening rate of (Nb, V)(C, N) particles increase rapidly and the coherent orientation between (Nb, V)(C, N) particles and the matrix was lost gradually. Meanwhile, coarse M23C6 was distributed at the grain boundary with chain shape, which was non-coherent with the matrix. The coarsening behavior of (Nb, V)(C, N) precipitates in the grain was analyzed, and the size of the particles precipitated after aging treatment at 650°C for different time was calculated and studied. After aging treatment at 650 °C for 2 h, the yield strength and tensile strength of the stainless steel was 705.6 MPa and 1002.3 MPa, the elongation and the relative magnetic permeability was 37.8% and 1.0035, respectively.


2018 ◽  
Vol 22 (1) ◽  
Author(s):  
Camila Haga Beraldo ◽  
José Wilmar Calderón-Hernández ◽  
Rodrigo Magnabosco ◽  
Neusa Alonso-Falleiros

2020 ◽  
Vol 797 ◽  
pp. 140083
Author(s):  
Zhenglong Lei ◽  
Yuan Chen ◽  
Shengchong Ma ◽  
Heng Zhou ◽  
Jingtao Liu ◽  
...  

2015 ◽  
Vol 86 ◽  
pp. 482-486 ◽  
Author(s):  
Xinhong Xiong ◽  
Pengdan Dai ◽  
Dunmiao Quan ◽  
Zhiping Wang ◽  
Qiaoxin Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document