The performances and degradation mechanisms of a commercial artificial graphite/LiNi0.5Co0.2Mn0.3O2 pouch cell at different cutoff voltages and temperatures

2021 ◽  
pp. 159678
Author(s):  
Xu-Feng Zang ◽  
Shanshan Sun ◽  
Hongwei Yu ◽  
Shengchen Yang ◽  
Hui-ling Xia
Keyword(s):  
Degradation Mechanisms ◽  
Artificial Graphite

Lithium-ion Battery Degradation Mechanisms and Failure Analysis Methodology

2012 ◽  
Author(s):  
Bhanu Sood ◽  
Lucas Severn ◽  
Michael Osterman ◽  
Michael Pecht ◽  
Anton Bougaev ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Lithium Ion Batteries ◽  
Elevated Temperatures ◽  
Failure Process ◽  
Lithium Ion ◽  
Degradation Mechanisms ◽  
Analysis Methodology ◽  
Depth Of Discharge ◽  
Battery Degradation ◽  
Non Destructive

Abstract A review of the prevalent degradation mechanisms in Lithium ion batteries is presented. Degradation and eventual failure in lithium-ion batteries can occur for a variety of dfferent reasons. Degradation in storage occurs primarily due to the self-discharge mechanisms, and is accelerated during storage at elevated temperatures. The degradation and failure during use conditions is generally accelerated due to the transient power requirements, the high frequency of charge/discharge cycles and differences between the state-of-charge and the depth of discharge influence the degradation and failure process. A step-by-step methodology for conducting a failure analysis of Lithion batteries is presented. The failure analysis methodology is illustrated using a decision-tree approach, which enables the user to evaluate and select the most appropriate techniques based on the observed battery characteristics. The techniques start with non-destructive and non-intrusive steps and shift to those that are more destructive and analytical in nature as information about the battery state is gained through a set of measurements and experimental techniques.

scholarly journals On the degradation mechanisms of quantum-dot light-emitting diodes

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Song Chen ◽  
Weiran Cao ◽  
Taili Liu ◽  
Sai-Wing Tsang ◽  
Yixing Yang ◽  
...  
Keyword(s):  
Quantum Dot ◽  
Light Emitting Diodes ◽  
Degradation Mechanisms ◽  
Light Emitting

scholarly journals Na0.76V6O15/Activated Carbon Hybrid Cathode for High-Performance Lithium-Ion Capacitors

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 122
Author(s):  
Renwei Lu ◽  
Xiaolong Ren ◽  
Chong Wang ◽  
Changzhen Zhan ◽  
Ding Nan ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Energy Density ◽  
Power Density ◽  
Cathode Materials ◽  
Low Cost ◽  
Lithium Ion ◽  
High Energy ◽  
Cycling Stability ◽  
High Energy Density ◽  
Artificial Graphite

Lithium-ion hybrid capacitors (LICs) are regarded as one of the most promising next generation energy storage devices. Commercial activated carbon materials with low cost and excellent cycling stability are widely used as cathode materials for LICs, however, their low energy density remains a significant challenge for the practical applications of LICs. Herein, Na0.76V6O15 nanobelts (NaVO) were prepared and combined with commercial activated carbon YP50D to form hybrid cathode materials. Credit to the synergism of its capacitive effect and diffusion-controlled faradaic effect, NaVO/C hybrid cathode displays both superior cyclability and enhanced capacity. LICs were assembled with the as-prepared NaVO/C hybrid cathode and artificial graphite anode which was pre-lithiated. Furthermore, 10-NaVO/C//AG LIC delivers a high energy density of 118.9 Wh kg−1 at a power density of 220.6 W kg−1 and retains 43.7 Wh kg−1 even at a high power density of 21,793.0 W kg−1. The LIC can also maintain long-term cycling stability with capacitance retention of approximately 70% after 5000 cycles at 1 A g−1. Accordingly, hybrid cathodes composed of commercial activated carbon and a small amount of high energy battery-type materials are expected to be a candidate for low-cost advanced LICs with both high energy density and power density.

scholarly journals Critical Review of Polymeric Building Envelope Materials: Degradation, Durability and Service Life Prediction

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 299
Author(s):  
Marzieh Riahinezhad ◽  
Madeleine Hallman ◽  
J-F. Masson
Keyword(s):  
Climate Change ◽  
Service Life ◽  
Critical Review ◽  
Life Prediction ◽  
Building Envelope ◽  
Service Life Prediction ◽  
Degradation Mechanisms ◽  
Material Component ◽  
Aging Conditions ◽  
Environmentally Sound

This paper provides a critical review of the degradation, durability and service life prediction (SLP) of polymeric building envelope materials (BEMs), namely, claddings, air/vapour barriers, insulations, sealants, gaskets and fenestration. The rate of material deterioration and properties determine the usefulness of a product; therefore, knowledge of the significant degradation mechanisms in play for BEMs is key to the design of proper SLP methods. SLP seeks to estimate the life expectancy of a material/component exposed to in-service conditions. This topic is especially important with respect to the potential impacts of climate change. The surrounding environment of a building dictates the degradation mechanisms in play, and as climate change progresses, material aging conditions become more unpredictable. This can result in unexpected changes and/or damages to BEMs, and shorter than expected SL. The development of more comprehensive SLP methods is economically and environmentally sound, and it will provide more confidence, comfort and safety to all building users. The goal of this paper is to review the existing literature in order to identify the knowledge gaps and provide suggestions to address these gaps in light of the rapidly evolving climate.

Sign in / Sign up

Export Citation Format

Share Document