Studies on the mechanism of large cavity to improve the growth rate of large diamond under HPHT conditions

2019 ◽  
Vol 515 ◽  
pp. 66-71
Author(s):  
Yadong Li ◽  
Yong Li ◽  
Liangchao Chen ◽  
Longsuo Guo ◽  
Zelong He ◽  
...  
2011 ◽  
Vol 266 ◽  
pp. 89-92
Author(s):  
Shang Sheng Li ◽  
Ning Luo ◽  
Xiao Lei Li ◽  
Tai Chao Su ◽  
You Mou Zhou ◽  
...  

With adopting Al as the nitrogen getter in Ni70Mn25Co5 or Fe55Ni29Co16 catalyst, High-quality type-Ⅱa large diamonds have been grown under the conditions of about 5.5GPa and 1580K by using the temperature gradient method. While Al(2.0wt%) is added in the Fe55Ni29Co16, the nitrogen concentration(Nc) in the diamond is less than 1ppm. While Al(4.0wt%) is added in the Ni70Mn25Co5, the Nc in the diamond is highly arrived at 48ppm. The different of solubility of nitrogen in both catalyst at high pressure and high temperature is the basic reason of the different effect of eliminating nitrogen of Al. It can be shown in experamentals that Al is a less efficient nitrogen getter in Ni70Mn25Co5 than in Fe55Ni29Co16. While Al(2.0wt%) is added in the Fe55Ni29Co16, the high-quality type-Ⅱa large diamond, in which nitrogen is less than 1ppm and which the size was arrived at 3.3mm, had grown by decreasing the growth rate of diamond.


2002 ◽  
Vol 237-239 ◽  
pp. 1281-1285 ◽  
Author(s):  
H. Sumiya ◽  
N. Toda ◽  
S. Satoh

2013 ◽  
Vol 721 ◽  
pp. 109-112
Author(s):  
Wan Li Yu ◽  
Xiao Peng Jia ◽  
Qing Xi Yuan

Crystal defects in a large diamond crystal synthesized by high pressure and high temperature (HPHT) method were investigated by synchrotron radiation topography. Five bundles of dislocations were observed in the specimen. Two bundles of the dislocations are in the <100> direction and three of the others are extended at <110>. The Burgers vectors of the dislocations are different within the same bundle as the extinction hinted. The dislocations in <100> direction possess higher energy than the dislocations in <110> and {111}, so they are in the metastable state. The <100> dislocations has not been found in natural diamond yet. The reason of that was the great difference of the growth rate of synthetic and natural diamonds.


Author(s):  
Wilfried Sigle ◽  
Matthias Hohenstein ◽  
Alfred Seeger

Prolonged electron irradiation of metals at elevated temperatures usually leads to the formation of large interstitial-type dislocation loops. The growth rate of the loops is proportional to the total cross-section for atom displacement,which is implicitly connected with the threshold energy for atom displacement, Ed . Thus, by measuring the growth rate as a function of the electron energy and the orientation of the specimen with respect to the electron beam, the anisotropy of Ed can be determined rather precisely. We have performed such experiments in situ in high-voltage electron microscopes on Ag and Au at 473K as a function of the orientation and on Au as a function of temperature at several fixed orientations.Whereas in Ag minima of Ed are found close to <100>,<110>, and <210> (13-18eV), (Fig.1) atom displacement in Au requires least energy along <100>(15-19eV) (Fig.2). Au is thus the first fcc metal in which the absolute minimum of the threshold energy has been established not to lie in or close to the <110> direction.


2020 ◽  
Vol 640 ◽  
pp. A53
Author(s):  
L. Löhnert ◽  
S. Krätschmer ◽  
A. G. Peeters

Here, we address the turbulent dynamics of the gravitational instability in accretion disks, retaining both radiative cooling and irradiation. Due to radiative cooling, the disk is unstable for all values of the Toomre parameter, and an accurate estimate of the maximum growth rate is derived analytically. A detailed study of the turbulent spectra shows a rapid decay with an azimuthal wave number stronger than ky−3, whereas the spectrum is more broad in the radial direction and shows a scaling in the range kx−3 to kx−2. The radial component of the radial velocity profile consists of a superposition of shocks of different heights, and is similar to that found in Burgers’ turbulence. Assuming saturation occurs through nonlinear wave steepening leading to shock formation, we developed a mixing-length model in which the typical length scale is related to the average radial distance between shocks. Furthermore, since the numerical simulations show that linear drive is necessary in order to sustain turbulence, we used the growth rate of the most unstable mode to estimate the typical timescale. The mixing-length model that was obtained agrees well with numerical simulations. The model gives an analytic expression for the turbulent viscosity as a function of the Toomre parameter and cooling time. It predicts that relevant values of α = 10−3 can be obtained in disks that have a Toomre parameter as high as Q ≈ 10.


1987 ◽  
Vol 48 (C1) ◽  
pp. C1-661-C1-662 ◽  
Author(s):  
J. R. PETIT ◽  
P. DUVAL ◽  
C. LORIUS

2014 ◽  
pp. 4-20 ◽  
Author(s):  
G. Idrisov ◽  
S. Sinelnikov-Murylev

The paper analyzes the inconsequence and problems of Russian economic policy to accelerate economic growth. The authors consider three components of growth rate (potential, Russian business cycle and world business cycle components) and conclude that in order to pursue an effective economic policy to accelerate growth, it has to be addressed to the potential (long-run) growth component. The main ingredients of this policy are government spending restructuring and budget institutions reform, labor and capital markets reforms, productivity growth.


Sign in / Sign up

Export Citation Format

Share Document