Study of thermal and mechanical behaviors of flame retardant polystyrene-based nanocomposites prepared via in-situ polymerization method

2017 ◽  
Vol 49 ◽  
pp. 228-239 ◽  
Author(s):  
Lubna Ahmed ◽  
Bin Zhang ◽  
Spencer Hawkins ◽  
M. Sam Mannan ◽  
Zhengdong Cheng
Keyword(s):  
Flame Retardant ◽  
In Situ Polymerization ◽  
Mechanical Behaviors ◽  
Polymerization Method

Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester

2014 ◽  
Vol 1015 ◽  
pp. 381-384
Author(s):  
Li Liu ◽  
Li Hai Cai ◽  
Dan Liu ◽  
Jun Xu ◽  
Bao Hua Guo
Keyword(s):  
Mechanical Properties ◽  
Polymer Matrix ◽  
Crystallization Temperature ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Single Fiber ◽  
Butylene Succinate ◽  
Crystallization Behaviors ◽  
Polymerization Method

The poly (butylene succinate) (PBS) and 3 wt% attapulgite (ATP) reinforced PBS/ATP nanocomposites with 1,6-hexanediol were fabricated using an in situ polymerization method. The crystallization behaviors indicated that ATP had effectively acted as nucleating agent, resulting in the enhancement on the crystallization temperature. The SEM results showed a superior interfacial linkage between ATP and PBS. Also, ATP could disperse as a single fiber and embed in the polymer matrix, which resulted in the improved mechanical properties.

High-performance textile electrodes for wearable electronics obtained by an improved in situ polymerization method

2019 ◽  
Vol 361 ◽  
pp. 897-907 ◽  
Author(s):  
Jingchun Lv ◽  
Peiwen Zhou ◽  
Linping Zhang ◽  
Yi Zhong ◽  
Xiaofeng Sui ◽  
...  
Keyword(s):  
High Performance ◽  
In Situ Polymerization ◽  
Wearable Electronics ◽  
Textile Electrodes ◽  
Polymerization Method

scholarly journals High Performance Attapulgite/Polypyrrole Nanocomposite Reinforced Polystyrene (PS) Foam Based on Supercritical CO2 Foaming

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 985 ◽  
Author(s):  
Yidong Liu ◽  
Lingfeng Jian ◽  
Tianhua Xiao ◽  
Rongtao Liu ◽  
Shun Yi ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
High Performance ◽  
In Situ Polymerization ◽  
Compression Modulus ◽  
Blowing Agents ◽  
Foaming Process ◽  
Potential Applications ◽  
Polymerization Method ◽  
Low Solubility

CO2 has been regarded as one of the most promising blowing agents for polystyrene (PS) foam due to its non-flammability, low price, nontoxicity, and eco-friendliness. However, the low solubility and fast diffusivity of CO2 in PS hinder its potential applications. In this study, an attapulgite (ATP)/polypyrrole (PPy) nanocomposite was developed using the in situ polymerization method to generate the hierarchical cell texture for the PS foam based on the supercritical CO2 foaming. The results demonstrated that the nanocomposite could act as an efficient CO2 capturer enabling the random release of it during the foaming process. In contrast to the pure PS foam, the ATP/PPy nanocomposite reinforced PS foam is endowed with high cell density (up to 1.9 × 106) and similar thermal conductivity as the neat PS foam, as well as high compression modulus. Therefore, the in situ polymerized ATP/PPy nanocomposite makes supercritical CO2 foaming desired candidate to replace the widely used fluorocarbons and chlorofluorocarbons as PS blowing agents.

Preparation of a Novel Magnetic Stir Bar for the Pretreatment of the Plasticizers in Lake Water

2014 ◽  
Vol 989-994 ◽  
pp. 164-167
Author(s):  
Rui Feng
Keyword(s):  
High Performance ◽  
Dibutyl Phthalate ◽  
In Situ Polymerization ◽  
Stir Bar Sorptive Extraction ◽  
Dimethyl Phthalate ◽  
Experimental Conditions ◽  
Sorptive Extraction ◽  
Linear Relationships ◽  
Polymerization Method

An in-situ polymerization method was used for the preparation of a novel stir bar based on neodymium magnet (Nd2Fe14B) powders. The processes were carried out by several steps including the enwrapping of Nd2Fe14B, the modification of the enclosed Nd2Fe14B, and the form of organic polymers on the surface of the modified powders. It was successfully used to enrich the plasticizers in water sample by stir bar sorptive extraction (SBSE). The experimental conditions for SBSE, such as the choice of extraction sorvents, salt concentration, extraction and desorption time were optimized in detail. Coupled to high performance liquid chromatography (HPLC), the recoveries of dibutyl phthalate (DBP), dimethyl phthalate (DMP), diethyl phthalate (DEP) were 89.2%~92.1%, 91.9%~96.6% and 94.3%~96.7%, respectively; the linear relationships between the concentration 5 μg/L and 800 μg/L for DBP were obtained; the limits of detection ranged from 0.09 μg/L to 0.21 μg/L in the optimal conditions.

scholarly journals Preparation and Conductive and Electromagnetic Properties of Fe3O4/PANI Nanocomposite via Reverse In Situ Polymerization

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Di Zhang ◽  
Huaiyin Chen ◽  
Ruoyu Hong
Keyword(s):  
In Situ Polymerization ◽  
Rapid Development ◽  
Chloroform Solution ◽  
Electromagnetic Properties ◽  
Network Analyzer ◽  
The Novel ◽  
Electromagnetic Devices ◽  
Ft Ir ◽  
Polymerization Method

In this paper, the magnetite/polyaniline (PANI) nanocomposite was prepared by the novel reverse in situ polymerization method. Fe3O4 magnetic nanoparticles were synthesized in situ in PANI chloroform solution to form a suspension containing the Fe3O4/PANI nanocomposite. It overcame the disadvantage of oxidation of the Fe3O4 by the oxidant in conventional method. The Fe3O4/PANI chloroform suspension and the Fe3O4/PANI powder were characterized by FT-IR, TEM, XRD, vibrating sample magnetometer, Gouy magnetic balance, conductivity meter, and vector network analyzer. It is demonstrated that the Fe3O4/PANI suspension has a good electrical conductivity that is up to 2.135 μS/cm at the optimal ratio of reactants. The Fe3O4 nanoparticles are well dispersed in the PANI network with a particle size of about 10 nm. Fe3O4/PANI powder has high saturation magnetization and magnetic susceptibility, as well as a broad application prospect in the field of electromagnetic devices. The Fe3O4/PANI powder exhibits an excellent microwave absorption behavior, which can be an outstanding candidate for the rapid development of broadband shielding materials.

Irradiation of poly(vinyl ester)/clay nanocomposites

2017 ◽  
Vol 52 (1) ◽  
pp. 17-25 ◽  
Author(s):  
Ahmad Mohaddespour ◽  
Seyed J Ahmadi ◽  
Hossein Abolghassemi ◽  
Seyed M Mahjoub ◽  
Saeid Atashrouz
Keyword(s):  
Vinyl Ester ◽  
In Situ Polymerization ◽  
Surface Hardness ◽  
Clay Nanocomposites ◽  
Mechanical And Thermal Properties ◽  
X Ray Diffraction ◽  
Transition Electron Microscopy ◽  
Organically Modified ◽  
Polymerization Method

The effect of electron beam irradiation on pristine poly(vinyl ester) and cured poly(vinyl ester)/clay nanocomposite with different clay contents is studied at irradiation doses ranging from 100 to 1000 kGy at room temperature. Poly(vinyl ester)/clay nanocomposites were prepared with different amounts of organically modified montmorillonite (1, 3, and 5 wt.%) by in situ polymerization method. Morphology properties of synthesized nanocomposites were studied by X-ray diffraction and transition electron microscopy. The irradiation dose up to 500 kGy yields an increase in Young’s modulus and tensile strength of nanocomposites while further irradiation deteriorates the mechanical strength of samples. Irradiation has no considerable influence on the surface hardness of synthesized nanocomposites. Thermogravimetric analysis results reveal the thermal stability of poly(vinyl ester), and its nanocomposites is improved with irradiation up to 500 kGy. However, similar to mechanical perdition at 1000 kGy irradiation, thermal resistance of nanocomposites decreases. The enhancement in mechanical and thermal properties of synthesized nanocomposites is attributed to the cross-linking effect as bonds can be formed directly between the neighbouring chains.

Sign in / Sign up

Export Citation Format

Share Document