The effect of basic pH on the elaboration of ZnFe2O4 nanoparticles by co-precipitation method: Structural, magnetic and hyperthermia characterization

2019 ◽  
Vol 478 ◽  
pp. 239-246 ◽  
Author(s):  
M.A. Ait Kerroum ◽  
A. Essyed ◽  
C. Iacovita ◽  
W. Baaziz ◽  
D. Ihiawakrim ◽  
...  
Keyword(s):  
Precipitation Method ◽  
Znfe2o4 Nanoparticles ◽  
Co Precipitation

scholarly journals Examination Of Structral Morphological and Magnetic Behaviour of Znfe2o4 Nanoparticle Synthesised by Co-Pricipitation Method

2019 ◽  
Vol 9 (1S4) ◽  
pp. 1085-1088
Keyword(s):  
Surface Morphology ◽  
Crystalline Phase ◽  
Magnetic Behaviour ◽  
Precipitation Method ◽  
Prepared Sample ◽  
Crystalline Nature ◽  
Znfe2o4 Nanoparticles ◽  
Phase Surface ◽  
Co Precipitation

The Zinc Ferrites (ZnFe2O4) nanoparticles (NPs) successfully synthesized by co-precipitation method. As prepared NPs were annealed withdifferent temperature at 800 and 1000C. The crystalline phase, surface morphology andelemental distribution were confirmed by XRD, SEM and EDS respectively. The prepared ZnFe2O4XRD pattern confirm the cubic crystalline nature. The surface morphology of the prepared sample was found irregular rock like structure due to ferric metal. FTIR, EDS studies prove charactristics behavioural vibration of Zn-Fe-O elements and purity of the sample correspondingly. Prepared ZnFe2O4 sample exhibit a super paramagnetic nature with the saturated magnetization of 22.066 emu/g and coercivity of 15 Oe by VSM analysis.

Magnetic and dielectric properties of BiFeO3 nanoparticles

2015 ◽  
Vol 7 (2) ◽  
pp. 1393-1403
Author(s):  
Dr R.P VIJAYALAKSHMI ◽  
N. Manjula ◽  
S. Ramu ◽  
Amaranatha Reddy
Keyword(s):  
Diffuse Reflectance Spectrum ◽  
Precipitation Method ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Bifeo3 Nanoparticles ◽  
Transmission Electron ◽  
Multiferroic Bifeo3 ◽  
Pure Phase ◽  
Simple Chemical ◽  
Co Precipitation

Single crystalline nano-sized multiferroic BiFeO3 (BFO) powders were synthesized through simple chemical co-precipitation method using polyethylene glycol (PEG) as capping agent. We obtained pure phase BiFeO3 powder by controlling pHand calcination temperature. From X-ray diffraction studies the nanoparticles were unambiguously identified to have a rhombohedrally distorted perovskite structure belonging to the space group of R3c. No secondary phases were detected. It indicates single phase structure. EDX spectra indicated the appearance of three elements Bi, Fe, O in 1:1:3. From the UV-Vis diffuse reflectance spectrum, the absorption cut-off wavelength of the BFO sample is around 558nm corresponding to the energy band gap of 2.2 eV. The size (60-70 nm) and morphology of the nanoparticles have been analyzed using transmission electron microscopy (TEM).   Linear M−H behaviour and slight hysteresis at lower magnetic field is observed for BiFeO3 nanoparticles from Vibrating sample magnetometer studies. It indicates weak ferromagnetic behaviour at room temperature. From dielectric studies, the conductivity value is calculated from the relation s = L/RbA Sm-1 and it is around 7.2 x 10-9 S/m.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

Diseases Prevention by Water Defluoridation Using Hydrotalcites as Decontaminant Materials

2017 ◽  
Vol 68 (1) ◽  
pp. 168-171 ◽  
Author(s):  
Letitia Doina Duceac ◽  
Cristina Elena Dobre ◽  
Ioana Pavaleanu ◽  
Gabriela Calin ◽  
Simona Nichitus ◽  
...  
Keyword(s):  
Dental Fluorosis ◽  
Precipitation Method ◽  
Original Structure ◽  
Fluoride Removal ◽  
Major Goal ◽  
Bone Stiffness ◽  
Morphological Aspects ◽  
Adsorption Capacities ◽  
Interlayer Structure ◽  
Co Precipitation

Preventing diseases is deemed to be the major goal of our century especially when an excessive fluoride in drinking water can cause dental fluorosis, bone stiffness, rheumatism and skeletal fluorosis. Fluoride uptake from groundwater implies a worldwide multidisciplinary effort in order to develop renewable, cheap, human friendly materials. Among other materials, hydrotalcites could be good candidates for an efficient fluoride removal from water due to their adsorption, anion exchange and reconstruction properties. These nanostructured materials were synthesized using co-precipitation method in controlled conditions. Presence of anions in the interlayer structure and morphological aspects were performed by FTIR and SEM techniques. Thermal treatment of hydrotalcites showed good adsorption capacities for water defluoridation mostly due to their tendency to restore the original structure.

Synthesis of highly sinterable YAG nanopowders by a modified co-precipitation method

2007 ◽  
Vol 433 (1-2) ◽  
pp. 328-331 ◽  
Author(s):  
Zhi-Hui Chen ◽  
Yun Yang ◽  
Zhang-Gui Hu ◽  
Jiang-Tao Li ◽  
Shu-Li He
Keyword(s):  
Precipitation Method ◽  
Co Precipitation

scholarly journals Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 832
Author(s):  
Edna X. Figueroa-Rosales ◽  
Javier Martínez-Juárez ◽  
Esmeralda García-Díaz ◽  
Daniel Hernández-Cruz ◽  
Sergio A. Sabinas-Hernández ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Hexagonal Phase ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Co Precipitation ◽  
Functionalized Mwcnts

Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were obtained by the co-precipitation method, followed by ultrasound-assisted and microwave radiation and thermal treatment at 250 °C. X-ray diffraction (XRD) confirmed the presence of a hexagonal phase in all the samples, while Fourier-transform infrared (FTIR) spectroscopy elucidated the interaction between HAp and MWCNTs. The photoluminescent technique revealed that HAp and the composite with non-functionalized MWCNTs present a blue luminescence, while the composite with functionalized MWCNTs, under UV-vis radiation shows an intense white emission. These findings allowed presentation of a proposal for the use of HAp and HAp with functionalized MWCNTs as potential materials for optoelectronic and medical applications.

Sign in / Sign up

Export Citation Format

Share Document