Further insight into the strength development of cemented paste backfill materials containing polycarboxylate ether-based superplasticizer

2021 ◽  
pp. 103859
Author(s):  
Zubaida Al-Moselly ◽  
Mamadou Fall ◽  
Sada Haruna
Minerals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 381 ◽  
Author(s):  
Jian Zhang ◽  
Hongwei Deng ◽  
Abbas Taheri ◽  
Junren Deng ◽  
Bo Ke

The strength and consistency of cemented paste backfill (CPB) are of key concerns in the stope stability and cost control for underground mines. It is common practice to use additives, such as superplasticizer, to improve the performance of CPB. This study mainly focuses on the effects of superplasticizer on the hydration, consistency, and strength of CPB. In this study, a polynaphtalene sulfonate was used as the superplasticizer. The binder is a mix of 33.3% ordinary Portland cement and 66.7% fly ash. The CPB specimens with a tailings-binder ratio of 3:1 and a solid concentration of 70% were then tested by a low field nuclear magnetic resonance system after different hydration times. Effects of polynaphtalene sulfonate on the hydration, fluidity, and strength were investigated. Results showed that the polynaphtalene sulfonate has a strong influence on short-duration hydration, which may contribute to the strength increase of CPB. It has been demonstrated that the polynaphtalene sulfonate improved the fluidity of the CPB mixture. With the increased dosage of polynaphtalene sulfonate, the slump increased. It was also found that the polynaphtalene sulfonate dosage has a negligible effect on the 1 day (d) strength while it has a strengthening effect on the 7 d, 14 d, and 28 d strength of CPB specimens.


2020 ◽  
Vol 259 ◽  
pp. 120798 ◽  
Author(s):  
Nan Zhou ◽  
Jixiong Zhang ◽  
Shenyang Ouyang ◽  
Xuejie Deng ◽  
Chaowei Dong ◽  
...  

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Haijun Wang ◽  
Yun Duan

Fly ash (FA) showed low reactivity when being used to prepare the binder for cemented paste backfill (CPB). In the present work, wet-grinding treatment was used to increase the pozzolanic reactivity of FA and promote its sustainable utilization. The results showed that wet-grinding could be a suitable and efficient technology for FA pretreatment. Wet-grinding strongly modified the structure of FA by decreasing the crystalline phase content and the binding energy of Si 2p and Al 2p, contributing to the increase in pozzolanic reactivity of FA. The performance of CPB samples prepared by wet-ground FA was then optimized. This was reflected by the acceleration in the sample setting and increase in the strength development. The compressive strength of the CPB samples prepared by wet-ground FA for 120 min was increased by around 40% after curing for 28 d compared with the control samples.


2022 ◽  
Vol 318 ◽  
pp. 125870
Author(s):  
Shenyang Ouyang ◽  
Yanli Huang ◽  
Nan Zhou ◽  
Junmeng Li ◽  
Huadong Gao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document