Dewetted bimetallic AuPd nanostructures on silicon carbide surface: Effect of film thickness and annealing temperature

Author(s):  
F. Ruffino ◽  
M.G. Grimaldi
Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1409
Author(s):  
Ofelia Durante ◽  
Cinzia Di Giorgio ◽  
Veronica Granata ◽  
Joshua Neilson ◽  
Rosalba Fittipaldi ◽  
...  

Among all transition metal oxides, titanium dioxide (TiO2) is one of the most intensively investigated materials due to its large range of applications, both in the amorphous and crystalline forms. We have produced amorphous TiO2 thin films by means of room temperature ion-plasma assisted e-beam deposition, and we have heat-treated the samples to study the onset of crystallization. Herein, we have detailed the earliest stage and the evolution of crystallization, as a function of both the annealing temperature, in the range 250–1000 °C, and the TiO2 thickness, varying between 5 and 200 nm. We have explored the structural and morphological properties of the as grown and heat-treated samples with Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Diffractometry, and Raman spectroscopy. We have observed an increasing crystallization onset temperature as the film thickness is reduced, as well as remarkable differences in the crystallization evolution, depending on the film thickness. Moreover, we have shown a strong cross-talking among the complementary techniques used displaying that also surface imaging can provide distinctive information on material crystallization. Finally, we have also explored the phonon lifetime as a function of the TiO2 thickness and annealing temperature, both ultimately affecting the degree of crystallinity.


Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2296 ◽  
Author(s):  
Yao Huang ◽  
Run Yang ◽  
Shijie Xiong ◽  
Jian Chen ◽  
Xinglong Wu

Silicon carbide (SiC) has a large number of polytypes of which 3C-, 4H-, 6H-SiC are most common. Since different polytypes have different energy gaps and electrical properties, it is important to identify and characterize various SiC polytypes. Here, Raman scattering is performed on 6H-SiC micro/nanocrystal (MNC) films to investigate all four folded transverse optic (TO) and longitudinal optic (LO) modes. With increasing film thickness, the four folded TO modes exhibit the same frequency downshift, whereas the four folded LO modes show a gradually-reduced downshift. For the same film thickness, all the folded modes show larger frequency downshifts with decreasing MNC size. Based on plasmons on MNCs, these folded modes can be attributed to strong coupling of the folded phonons with plasmons which show different strengths for the different folded modes while changing the film thickness and MNC size. This work provides a useful technique to identify SiC polytypes from Raman scattering.


2003 ◽  
Vol 780 ◽  
Author(s):  
Rasmi R. Das ◽  
P. Bhattacharya ◽  
W. Pérez ◽  
Ram S. Katiyarxya

AbstractPulsed-laser-deposition technique was used to grow SrBi2Nb2O9(SBN) thin films on platinized silicon substrates. The effect of annealing temperature and film thicknesses on the structural and electrical properties has been studied. The average grain size and rms surface roughness was found to increase with increasing annealing temperature. The degree of orientation along the (200) direction was increased with the film thicknesses. The remanent polarization was found to be increased with the film thicknesses and was attributed to the selftexturing characteristics of SBN films. Thin films with higher thickness (∼570 nm) exhibited high value of remanent polarization (∼38 ν/cm2) with coercive field of 185 kV/cm. There was a reduction of coercive field with the film thickness. The dielectric constant was observed to be independent of the film thickness. The increase in loss tangent with increasing film thicknesses was attributed to the reduction of dielectric breakdown strength of the films. The SBN thin films showed minimal fatigue characteristics and suitable material for memory devices.


Sign in / Sign up

Export Citation Format

Share Document