Surface properties and graphitization of polyacrylonitrile based fiber electrodes affecting the negative half-cell reaction in vanadium redox flow batteries

2016 ◽  
Vol 321 ◽  
pp. 210-218 ◽  
Author(s):  
J. Langner ◽  
M. Bruns ◽  
D. Dixon ◽  
A. Nefedov ◽  
Ch. Wöll ◽  
...  
2020 ◽  
Author(s):  
Kiana Amini ◽  
Mark D. Pritzker

Redox flow batteries (RFBs) are a relatively new generation of electrochemical devices suitable for large-scale energy storage applications. The separation between the electrolyte storage tanks and the electrochemical cell in RFBs simplifies the battery scale-up and facilitates the energy/power ratio tuning. Among the different types of RFBs investigated, those based on zinc and cerium are very attractive due to the large negative and positive electrode potentials in an aqueous media. Thus, zinc-cerium RFBs are capable of providing one of the highest cell voltages (~ 2.4 V) among flow [1]. To date, Zn-Ce RFBs have primarily been investigated galvanostatically to determine their charge, voltage and energy efficiencies and attempts have been made to suppress the rate of the hydrogen evolution side reaction [2,3]. In order to further optimize the performance of these batteries and to elucidate the future pathways to enhance their efficiency, the sources of voltage loss in the battery during discharge must be identified and the role of the positive and negative half-cells in the voltage loss determined. Toward this goal, we have conducted in situ polarization and EIS experiments on a full-cell Zn-Ce RFB with reference electrodes inserted in the system. At low and intermediate current densities, the main contributor to the voltage loss during discharge is the kinetic overpotential of the negative Zn/Zn2+ half-cell. On the other hand, at high current densities, mass transfer limitations at the positive Ce3+/Ce4+ half-cell cause a large potential drop in the system. From in situ kinetic studies, we have measured an exchange current density of ~ 7.4*10−3 A cm−2 for Zn oxidation and ~ 24.2*10−3 A cm−2 for Ce4+ reduction, which supports the findings from battery operation that the kinetics of the negative electrode reaction is slow compared to that of the positive electrode at low-to-intermediate current densities. The use of an alternative mixed methanesulfonate-chloride negative electrolyte to reduce the kinetic overpotential of the negative half-cell reaction and the influence of the flow rate on the mass-transfer rate of the positive half-cell reaction have also been investigated and will be discussed in this presentation.


2018 ◽  
Vol 378 ◽  
pp. 776-783 ◽  
Author(s):  
Simon Ressel ◽  
Florian Bill ◽  
Lucas Holtz ◽  
Niklas Janshen ◽  
Antonio Chica ◽  
...  

RSC Advances ◽  
2016 ◽  
Vol 6 (61) ◽  
pp. 56399-56405 ◽  
Author(s):  
Zhaolin Na ◽  
Fei Liang ◽  
Dongming Yin ◽  
Limin Wang

Bi3+ ions can serve as high-performance additives for lead-based redox flow batteries.


Carbon ◽  
2013 ◽  
Vol 60 ◽  
pp. 280-288 ◽  
Author(s):  
Cristina Flox ◽  
Javier Rubio-García ◽  
Marcel Skoumal ◽  
Teresa Andreu ◽  
Juan Ramón Morante

Author(s):  
Han-Wen Chou ◽  
Feng-Zhi Chang ◽  
Hwa-Jou Wei ◽  
Bhupendra Singh ◽  
Amornchai Arpornwichanop ◽  
...  

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 176
Author(s):  
Iñigo Aramendia ◽  
Unai Fernandez-Gamiz ◽  
Adrian Martinez-San-Vicente ◽  
Ekaitz Zulueta ◽  
Jose Manuel Lopez-Guede

Large-scale energy storage systems (ESS) are nowadays growing in popularity due to the increase in the energy production by renewable energy sources, which in general have a random intermittent nature. Currently, several redox flow batteries have been presented as an alternative of the classical ESS; the scalability, design flexibility and long life cycle of the vanadium redox flow battery (VRFB) have made it to stand out. In a VRFB cell, which consists of two electrodes and an ion exchange membrane, the electrolyte flows through the electrodes where the electrochemical reactions take place. Computational Fluid Dynamics (CFD) simulations are a very powerful tool to develop feasible numerical models to enhance the performance and lifetime of VRFBs. This review aims to present and discuss the numerical models developed in this field and, particularly, to analyze different types of flow fields and patterns that can be found in the literature. The numerical studies presented in this review are a helpful tool to evaluate several key parameters important to optimize the energy systems based on redox flow technologies.


Sign in / Sign up

Export Citation Format

Share Document