An analysis on the effect of machining parameters on surface quality during dry machining of Ti-6Al-4V alloy

2020 ◽  
Vol 22 ◽  
pp. 2814-2823
Author(s):  
S. Samsudeensadham ◽  
Dinesh Kumar Suppan ◽  
V. Krishnaraj ◽  
M. Parthiban
Keyword(s):  
Surface Quality ◽  
Machining Parameters ◽  
Dry Machining

COMPLEXITY-BASED ANALYSIS OF THE INFLUENCE OF MACHINING PARAMETERS ON THE SURFACE FINISH OF DRILLED HOLES IN DRILLING OPERATION

Fractals ◽  
2019 ◽  
Vol 27 (06) ◽  
pp. 1950087 ◽  
Author(s):  
ASHFAQ AHAMED ◽  
ATHIF AHAMED ◽  
DILAN KATUWAWALA ◽  
TEOH TIONG EE ◽  
ZI HAN TAN ◽  
...  
Keyword(s):  
Surface Quality ◽  
Fractal Theory ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Dry Machining ◽  
Drilling Operation ◽  
Two Factors ◽  
Machining Operations

Drilling is a famous and widely used machining operation to make holes in the workpiece. The size and surface quality of drilled hole are two factors that should be considered mainly. In this research, we examine the effect of different machining parameters and conditions on the surface quality of generated hole in drilling operation. For this purpose, we employ fractal theory and investigate how the variations of depth of cut and spindle speed affect the complexity of surface texture of drilled holes in wet and dry machining conditions. Based on the obtained results, the increment of depth of cut and spindle speed in case of wet and dry machining causes lower complexity on the generated surface from drilling. In addition, the generated surface from dry machining is more complex than the generated surface from wet machining. The obtained method in this research can be applied to other machining operations in order to investigate the effect of machining parameters and conditions on the surface quality of machined workpiece.

scholarly journals Study of ultrasonic vibration–assisted thread turning of Inconel 718 superalloy

2019 ◽  
Vol 11 (10) ◽  
pp. 168781401988377
Author(s):  
Yu He ◽  
Zhongming Zhou ◽  
Ping Zou ◽  
Xiaogang Gao ◽  
Kornel F Ehmann
Keyword(s):  
Surface Quality ◽  
Ultrasonic Vibration ◽  
Inconel 718 ◽  
Gas Turbines ◽  
Tool Path ◽  
Machining Parameters ◽  
Thread Cutting ◽  
Workpiece Surface ◽  
Inconel 718 Superalloy ◽  
The Relationship

With excellent properties, high-temperature superalloys have become the main application materials for aircraft engines, gas turbines, and many other devices. However, superalloys are typically difficult to machine, especially for the thread cutting. In this article, an ultrasonic vibration–assisted turning system is proposed for thread cutting operations in superalloys. A theoretical analysis of ultrasonic vibration–assisted thread cutting is carried out. An ultrasonic vibration–assisted system was integrated into a standard lathe to demonstrate thread turning in Inconel 718 superalloy. The influence of ultrasonic vibration–assisted machining on workpiece surface quality, chip shape, and tool wear was analyzed. The relationship between machining parameters and ultrasonic vibration–assisted processing performance was also explored. By analyzing the motion relationship between tool path and workpiece surface, the reasons for improved workpiece surface quality by ultrasonic vibration–assisted machining were explained.

scholarly journals Face Grinding Surface Quality of High Volume Fraction SiCp/Al Composite Materials

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Xu Zhao ◽  
Yadong Gong ◽  
Guiqiang Liang ◽  
Ming Cai ◽  
Bing Han
Keyword(s):  
Friction Coefficient ◽  
Surface Morphology ◽  
Surface Quality ◽  
Volume Fraction ◽  
High Volume ◽  
Spindle Speed ◽  
High Volume Fraction ◽  
Machining Parameters ◽  
Al Composite

AbstractThe existing research on SiCp/Al composite machining mainly focuses on the machining parameters or surface morphology. However, the surface quality of SiCp/Al composites with a high volume fraction has not been extensively studied. In this study, 32 SiCp/Al specimens with a high volume fraction were prepared and their machining parameters measured. The surface quality of the specimens was then tested and the effect of the grinding parameters on the surface quality was analyzed. The grinding quality of the composite specimens was comprehensively analyzed taking the grinding force, friction coefficient, and roughness parameters as the evaluation standards. The best grinding parameters were obtained by analyzing the surface morphology. The results show that, a higher spindle speed should be chosen to obtain a better surface quality. The final surface quality is related to the friction coefficient, surface roughness, and fragmentation degree as well as the quantity and distribution of the defects. Lower feeding amount, lower grinding depth and appropriately higher spindle speed should be chosen to obtain better surface quality. Lower feeding amount, higher grinding depth and spindle speed should be chosen to balance grind efficiently and surface quality. This study proposes a systematic evaluation method, which can be used to guide the machining of SiCp/Al composites with a high volume fraction.

scholarly journals Research on the Influencing Factors of "Scale Veins" of Single Point Incremental Forming Workpieces Surface

2015 ◽  
Vol 9 (1) ◽  
pp. 1025-1032
Author(s):  
Shi Pengtao ◽  
Li Yan ◽  
Yang Mingshun ◽  
Yao Zimeng
Keyword(s):  
Surface Quality ◽  
Incremental Forming ◽  
Single Point ◽  
Spindle Speed ◽  
Experimental Results ◽  
Feed Speed ◽  
Single Point Incremental Forming ◽  
Machining Parameters ◽  
The Mathematical Model

To furthermore optimize the machining parameters and improve the surface quality of the workpieces manufactured by single point incremental forming method, the formation mechanism of the sacle veins on the metal incremental froming workpieces was studied through experiment method. The influence principle of the spindle speed, the feed speed and the material of tip of tools on the length of scale veins was obtained through analyzing the experimental results and building the mathematical model among the length of scale veins were feed speed and spindle speed through measuring the roughness of surfaces and observing the appearance of the forming workpieces. The experimental results showed that, the spindle speed, the feed speed and the material of tool tips have a significant effect on the scale veins formation on the surface of forming workpieces. Therefore, an appropriate group of spindle speed and feed speed can reduce the effect of scale veins on the roughness of single point incremental forming workpieces and furthermore improve the surface quality of forming workpieces.

scholarly journals Electropolishing Parametric Optimization of Surface Quality for the Fabrication of a Titanium Microchannel Using the Taguchi Method

Machines ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 325
Author(s):  
Muslim Mahardika ◽  
Martin Andre Setyawan ◽  
Tutik Sriani ◽  
Norihisa Miki ◽  
Gunawan Setia Prihandana
Keyword(s):  
Taguchi Method ◽  
Surface Quality ◽  
Process Parameters ◽  
Applied Voltage ◽  
High Surface ◽  
Machining Process ◽  
Machining Parameters ◽  
Pareto Analysis ◽  
High Surface Quality

Titanium is widely used in biomedical components. As a promising advanced manufacturing process, electropolishing (EP) has advantages in polishing the machined surfaces of material that is hard and difficult to cut. This paper presents the fabrication of a titanium microchannel using the EP process. The Taguchi method was adopted to determine the optimal process parameters by which to obtain high surface quality using an L9 orthogonal array. The Pareto analysis of variance was utilized to analyze the three machining process parameters: applied voltage, concentration of ethanol in an electrolyte solution, and machining gap. In vitro experiments were conducted to investigate the fouling effect of blood on the microchannel. The result shows that an applied voltage of 20 V, an ethanol concentration of 20 vol.%, and a machining gap of 10 mm are the optimum machining parameters by which to enhance the surface quality of a titanium microchannel. Under the optimized machining parameters, the surface quality improved from 1.46 to 0.22 μm. Moreover, the adhesion of blood on the surface during the fouling experiment was significantly decreased, thus confirming the effectiveness of the proposed method.

Study on the Effects of Abrasive and Coolant-Lubricant Types on Minimum Quantity Lubrication-MQL Grinding

2011 ◽  
Vol 325 ◽  
pp. 231-237 ◽  
Author(s):  
Taghi Tawakoli ◽  
M.J. Hadad ◽  
A. Daneshi ◽  
M.H. Sadeghi ◽  
B. Sadeghi
Keyword(s):  
Surface Quality ◽  
Minimum Quantity Lubrication ◽  
Dry Machining ◽  
Grinding Forces ◽  
Minimum Quantity ◽  
Mql Grinding ◽  
Air Jet ◽  
Dry Grinding ◽  
Surface Damages ◽  
Minimum Quantity Lubricant

In dry grinding, as there is no coolant lubricant to transfer the heat from the contact zone, generation of surface damages are not preventable. Promising alternatives to conventional flood coolant applications are also Minimum Quantity Lubricant (MQL) or Near Dry Machining (NDM) or Semi Dry Machining (SDM). This research has been conducted to study the influence of the abrasive and coolant-lubricant types on the minimum quantity lubrication (MQL) grinding performance. One type of CBN and three types of conventional wheels (corundum) were tested. The tests were carried out in presence of fluid, air jet and eleven types of coolant-lubricants, as well as in dry condition. The results indicate that the finest surface quality and the lowest grinding forces could be obtained when grinding with CBN wheels. In the case of conventional wheels, the coarser wheel induces much proper grinding results.

Fractal-Based Analysis of the Relation Between Surface Finish and Machine Vibration in Milling Operation

2019 ◽  
Vol 19 (01) ◽  
pp. 2050006 ◽  
Author(s):  
Muhammad Owais Qadri ◽  
Hamidreza Namazi
Keyword(s):  
Surface Quality ◽  
Complex Structure ◽  
Vibration Signal ◽  
Depth Of Cut ◽  
Machining Parameters ◽  
Machined Surface ◽  
Machine Vibration ◽  
Milling Operation ◽  
Surface Changes

Analysis of surface quality of machined workpiece is an important issue in machining of materials. For this purpose, scientists analyze how the texture of machined surface changes due to different conditions. Machine vibration is one of the factors that highly affects the surface quality of machined surface. In this research, we analyze the relation between machine vibration and surface quality of machined workpiece. For this purpose, we employ fractal theory and analyze how the complex structure of machined surface changes with the complex structure of machine vibration signal in case of variations of machining parameters, namely, depth of cut, feed rate and spindle speed, in milling operation. Based on the results, variations of surface quality of machined workpiece are related with the variations of complexity of machine vibration signal. The method of analysis employed in this research can be applied to other machining operations in order to find the relation between machine vibration and surface quality of machined workpiece.

Sign in / Sign up

Export Citation Format

Share Document