Influence of gear tooth addendum and dedendum on the helical gear optimization considering mass, efficiency, and transmission error

2021 ◽  
Vol 166 ◽  
pp. 104476
Author(s):  
Chanho Choi ◽  
Hyoungjong Ahn ◽  
Young-jun Park ◽  
Geun-ho Lee ◽  
Su-chul Kim
Keyword(s):  
Gear Tooth ◽  
Transmission Error ◽  
Helical Gear

Tooth Contact Analysis of Longitudinal Cycloidal-Crowned Helical Gears With Circular Arc Teeth

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Wei-Shiang Wang ◽  
Zhang-Hua Fong
Keyword(s):  
Gear Tooth ◽  
Longitudinal Direction ◽  
Transmission Error ◽  
Helical Gear ◽  
Contact Analysis ◽  
Tooth Contact Analysis ◽  
Tooth Contact ◽  
Circular Arc ◽  
Tooth Flank ◽  
Assembly Error

This paper proposes a new type of double-crowned helical gear that can be continuously cut on a modern Cartesian-type hypoid generator with two face-hobbing head cutters and circular-arc cutter blades. The gear tooth flank is double crowned with a cycloidal curve in the longitudinal direction and a circular arc in the profile direction. To gauge the sensitivity of the transmission errors and contact patterns resulting from various assembly errors, this paper applies a tooth contact analysis technique and presents several numerical examples that show the benefit of the proposed double-crowned helical gear set. In contrast to a conventional helical involute gear, the tooth bearing and transmission error of the proposed gear set are both controllable and insensitive to gear-set assembly error.

scholarly journals Tooth Surface Modification for Helical Gear Pairs considering Mesh Misalignment Tolerance

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Guosheng Han ◽  
Bing Yuan ◽  
Guan Qiao
Keyword(s):  
Surface Modification ◽  
Gear Tooth ◽  
Transmission Error ◽  
Helical Gear ◽  
Tooth Surface ◽  
Tooth Contact Analysis ◽  
Nsga Ii ◽  
Design Variables ◽  
Tooth Flank ◽  
Tooth Surface Modification

Mesh misalignment in mating the gear tooth surface is common and difficult to be determined accurately because of system deformation and bearing clearances, as well as manufacturing and assembly errors. It is not appropriate to consider the mesh misalignment as a constant value or even completely ignore it in the tooth surface modification design. Aiming to minimize the expectation and variance of static transmission error (STE) fluctuations in consideration of mesh misalignment tolerance, a multiobjective optimization model of tooth surface modification parameters is proposed through coupling the NSGA-II algorithm and an efficient loaded tooth contact analysis (LTCA) model. The modified tooth flank of helical gear pairs is defined using 6 design variables which are related to profile modification, lead modification, and bias modification. The influences of mesh misalignment on time-dependent meshing stiffness (TDMS) and STE of unmodified and modified helical gear pairs are investigated. Then, the dynamic transmission error (DTE) of modified helical gears in consideration of mesh misalignment is discussed. The results indicate that the designed modified tooth surface shows good robustness to mesh misalignment.

Effects of the Gear Tooth Modification on the Nonlinear Dynamics of Gear Transmission System

2010 ◽  
Vol 97-101 ◽  
pp. 2764-2769
Author(s):  
Si Yu Chen ◽  
Jin Yuan Tang ◽  
C.W. Luo
Keyword(s):  
Nonlinear Dynamics ◽  
Gear Tooth ◽  
Simulation Method ◽  
Transmission Error ◽  
Dynamic Responses ◽  
Meshing Stiffness ◽  
Gear Transmission System ◽  
Tooth Modification ◽  
Static Transmission Error ◽  
Misalignment Error

The effects of tooth modification on the nonlinear dynamic behaviors are studied in this paper. Firstly, the static transmission error under load combined with misalignment error and modification are deduced. These effects can be introduced directly in the meshing stiffness and static transmission error models. Then the effect of two different type of tooth modification combined with misalignment error on the dynamic responses are investigated by using numerical simulation method. The numerical results show that the misalignment error has a significant effect on the static transmission error. The tooth crowning modification is generally preferred for absorbing the misalignment error by comparing with the tip and root relief. The tip and root relief can not resolve the vibration problem induced by misalignment error but the crowning modification can reduce the vibration significantly.

Gear transmission error outside the normal path of contact due to corner and top contact

1999 ◽  
Vol 213 (4) ◽  
pp. 389-400 ◽  
Author(s):  
R. G. Munro ◽  
L Morrish ◽  
D Palmer
Keyword(s):  
Dynamic Test ◽  
Theoretical Models ◽  
Transmission Error ◽  
Helical Gear ◽  
Gear Transmission ◽  
The Novel ◽  
Transmission Systems ◽  
Helical Gears ◽  
Tooth Stiffness ◽  
Top Contact

This paper is devoted to a phenomenon known as corner contact, or contact outside the normal path of contact, which can occur in spur and helical gear transmission systems under certain conditions. In this case, a change in position of the driven gear with respect to its theoretical position takes place, thus inducing a transmission error referred to here as the transmission error outside the normal path of contact (TEo.p.c). The paper deals with spur gears only, but the results are directly applicable to helical gears. It systematizes previous knowledge on this subject, suggests some further developments of the theory and introduces the novel phenomenon of top contact. The theoretical results are compared with experimental measurements using a single flank tester and a back-to-back dynamic test rig for spur and helical gears, and they are in good agreement. Convenient approximate equations for calculation of TEo.p.c suggested here are important for analysis of experimental data collected in the form of Harris maps. This will make possible the calculation of tooth stiffness values needed for use in theoretical models for spur and helical gear transmission systems.

Investigation of Noise Features of Planetary Gear Trains Based on Human Aural Characteristic

2017 ◽  
Author(s):  
Masao Nakagawa ◽  
Dai Nishida ◽  
Deepak Sah ◽  
Toshiki Hirogaki ◽  
Eiichi Aoyama
Keyword(s):  
Gear Tooth ◽  
Structural Complexity ◽  
Planetary Gear ◽  
Transmission Error ◽  
Sound Level ◽  
Tooth Surface ◽  
Surface Error ◽  
Planetary Gear Trains ◽  
Tooth Stiffness ◽  
Gear Trains

Planetary gear trains (PGTs) are widely used in various machines owing to their many advantages. However, they suffer from problems of noise and vibration due to the structural complexity and giving rise to substantial noise, vibration, and harshness with respect to both structures and human users. In this report, the sound level from PGTs is measured in an anechoic chamber based on human aural characteristic, and basic features of sound are investigated. Gear noise is generated by the vibration force due to varying gear tooth stiffness and the vibration force due to tooth surface error, or transmission error (TE). Dynamic TE is considered to be increased because of internal and external meshing. The vibration force due to tooth surface error can be ignored owing to almost perfect tooth surface. A vibration force due to varying tooth stiffness could be a major factor.

scholarly journals Computerized Design and Generation of Low-Noise Helical Gears with Modified Surface Topology

1995 ◽  
Vol 117 (2A) ◽  
pp. 254-261 ◽  
Author(s):  
F. L. Litvin ◽  
N. X. Chen ◽  
J. Lu ◽  
R. F. Handschuh
Keyword(s):  
Gear Tooth ◽  
Error Function ◽  
Transmission Error ◽  
Low Noise ◽  
Surface Topology ◽  
Helical Gears ◽  
Transmission Errors ◽  
Bearing Contact ◽  
Pinion Gear ◽  
Tooth Surfaces

An approach for the design and generation of low-noise helical gears with localized bearing contact is proposed. The approach is applied to double circular arc helical gears and modified involute helical gears. The reduction of noise and vibration is achieved by application of a predesigned parabolic function of transmission errors that is able to absorb a discontinuous linear function of transmission errors caused by misalignment. The localization of the bearing contact is achieved by the mismatch of pinion-gear tooth surfaces. Computerized simulation of meshing and contact of the designed gears demonstrated that the proposed approach will produce a pair of gears that has a parabolic transmission error function even when misalignment is present. Numerical examples for illustration of the developed approach are given.

Dynamic Analysis of a Multi-Mesh Helical Gear Train

1992 ◽  
Author(s):  
Ahmet Kahraman
Keyword(s):  
Loading Condition ◽  
Helix Angle ◽  
Transmission Error ◽  
Helical Gear ◽  
Forced Response ◽  
Gear Train ◽  
Loading Conditions ◽  
Gear Mesh ◽  
Natural Modes ◽  
Static Transmission Error

Abstract In this paper, the dynamic behavior of a multi-mesh helical gear train is studied. The gear train consists of three helical gears, with one of the gears in mesh with the other two. An 18-degree-of-freedom dynamic model which includes transverse, torsional, axial and rotational (rocking) motions of the flexibly mounted gears is developed. Two different loading conditions are identified. For case I, the system is driven by the gear in the middle, and for case II, the system is driven by one of the gears at either end of the gear train. Gear mesh phases under each loading condition are determined. The natural modes are predicted, and effects of the helix angle and the loading condition on the natural modes are explained. The forced response, which includes dynamic mesh and bearing forces, due to the static transmission error excitation is found. Effects of loading conditions and asymmetric positioning on the response are also explored. The results suggest that the dynamic forces are lower if the number of teeth of the gear in the middle is (i) an odd number for case I type loading, and (ii) an even number for case II type loading.

Generation of the Anti-Twist Crowned Helical Gear by Modifying the Gear Rotation Angle in the Hobbing Process

2017 ◽  
Vol 749 ◽  
pp. 161-170
Author(s):  
Ruei Hung Hsu ◽  
Yu Ren Wu ◽  
Shih Sheng Chen
Keyword(s):  
Rotation Angle ◽  
Gear Tooth ◽  
Helical Gear ◽  
Gear Hobbing ◽  
Tooth Flank ◽  
Center Distance

In the gear-hobbing process, the work gear tooth flank is usually longitudinally crowned by varying the center distance between the hob and the work gear. Without crossed angle compensation, however, this center distance variation produces a twisted tooth flank on the work gear. This paper therefore proposes a methodology to reduce this tooth flank twist and achieve anti-twist in longitudinal crowning by modifying the gear rotation angle in the hobbing process which is practiced using a CNC hobbing machine with three synchronous axes.

A parameterized numerical method for generating discrete helical gear tooth surface allowing non-standard geometry

2008 ◽  
Vol 222 (6) ◽  
pp. 1033-1038 ◽  
Author(s):  
J Hedlund ◽  
A Lehtovaara
Keyword(s):  
Gear Tooth ◽  
Numerical Approach ◽  
Helical Gear ◽  
Tooth Surface ◽  
Tool Profile ◽  
Standard Geometry ◽  
Gear Manufacturing ◽  
Involute Gears ◽  
Gear Geometry ◽  
Tooth Flank

Gear analysis is typically performed using calculation based on gear standards. Standards provide a good basis in gear geometry calculation for involute gears, but these are unsatisfactory for handling geometry deviations such as tooth flank modifications. The efficient utilization of finite-element calculation also requires the geometry generation to be parameterized. A parameterized numerical approach was developed to create discrete helical gear geometry and contact line by simulating the gear manufacturing, i.e. the hobbing process. This method is based on coordinate transformations and a wide set of numerical calculation points and their synchronization, which permits deviations from common involute geometry. As an example, the model is applied to protuberance tool profile and grinding with tip relief. A fairly low number of calculation points are needed to create tooth flank profiles where error is <1 μm.

Sign in / Sign up

Export Citation Format

Share Document