scholarly journals Robust organosilica membranes for high temperature reverse osmosis (RO) application: Membrane preparation, separation characteristics of solutes and membrane regeneration

2015 ◽  
Vol 493 ◽  
pp. 515-523 ◽  
Author(s):  
Suhaina M. Ibrahim ◽  
Hiroki Nagasawa ◽  
Masakoto Kanezashi ◽  
Toshinori Tsuru
Membranes ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 588
Author(s):  
Eiji Kamio ◽  
Hiroki Kurisu ◽  
Tomoki Takahashi ◽  
Atsushi Matsuoka ◽  
Tomohisa Yoshioka ◽  
...  

Forward osmosis (FO) membrane process is expected to realize energy-saving seawater desalination. To this end, energy-saving water recovery from a draw solution (DS) and effective DS regeneration are essential. Recently, thermo-responsive DSs have been developed to realize energy-saving water recovery and DS regeneration. We previously reported that high-temperature reverse osmosis (RO) treatment was effective in recovering water from a thermo-responsive ionic liquid (IL)-based DS. In this study, to confirm the advantages of the high-temperature RO operation, thermo-sensitive IL-based DS was treated by an RO membrane at temperatures higher than the lower critical solution temperature (LCST) of the DS. Tetrabutylammonium 2,4,6-trimethylbenznenesulfonate ([N4444][TMBS]) with an LCST of 58 °C was used as the DS. The high-temperature RO treatment was conducted at 60 °C above the LCST using the [N4444][TMBS]-based DS-lean phase after phase separation. Because the [N4444][TMBS]-based DS has a significantly temperature-dependent osmotic pressure, the DS-lean phase can be concentrated to an osmotic pressure higher than that of seawater at room temperature (20 °C). In addition, water can be effectively recovered from the DS-lean phase until the DS concentration increased to 40 wt%, and the final DS concentration reached 70 wt%. From the results, the advantages of RO treatment of the thermo-responsive DS at temperatures higher than the LCST were confirmed.


Desalination ◽  
1996 ◽  
Vol 105 (1-2) ◽  
pp. 57-61 ◽  
Author(s):  
Michael J.H. Snow ◽  
Dirk de Winter ◽  
Robert Buckingham ◽  
Jeff Campbell ◽  
J. Wagner

2010 ◽  
Vol 10 (1) ◽  
pp. 113-120 ◽  
Author(s):  
A.-C. Valentin

Process condensates represent a real value to the industry as it usually contains several items of potential savings, including but not limited to heat energy and water. In most cases the condensate has become contaminated with unwanted particles or with product carryover making it unfit for direct reuse in the process or as boiler makeup water. Conventional methods use heat exchangers for partial recovery of the heat content to be followed by ion exchange or reverse osmosis limited to 30–40°C feed temperature. By using the Duratherm® High Temperature compatible membranes in RO and NF, it is now possible to process the condensate at temperatures up to 80°C thereby maintaining the calorific value of the stream. Many plants also produce a product using evaporation. The overheads from the evaporators usually contain a small amount of their product that must either be recovered by an additional evaporation step or disposed of in a waste treatment plant. These reverse osmosis or nanofiltration systems allow concentration of the product, produce high quality water suitable for reuse, and reduce the load on the waste treatment plant. The treated condensate can then be used for various utility operations including boiler & process makeup.


Sign in / Sign up

Export Citation Format

Share Document