Details of glucose solution near-infrared band assignment revealed the anomer difference in the structure and the interaction with water molecules

2020 ◽  
pp. 114764
Author(s):  
Sae Tanaka ◽  
Roumiana Tsenkova ◽  
Masato Yasui
Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4158
Author(s):  
Haiyan Yu ◽  
Haochun Zhang ◽  
Heming Wang ◽  
Dong Zhang

Currently, there are few studies on the influence of microscale thermal radiation on the equivalent thermal conductivity of microscale porous metal. Therefore, this paper calculated the equivalent thermal conductivity of high-porosity periodic cubic silver frame structures with cell size from 100 nm to 100 µm by using the microscale radiation method. Then, the media radiation characteristics, absorptivity, reflectivity and transmissivity were discussed to explain the phenomenon of the radiative thermal conductivity changes. Furthermore, combined with spectral radiation properties at the different cross-sections and wavelength, the radiative transmission mechanism inside high-porosity periodic cubic frame silver structures was obtained. The results showed that the smaller the cell size, the greater radiative contribution in total equivalent thermal conductivity. Periodic cubic silver frames fluctuate more in the visible band and have better thermal radiation modulation properties in the near infrared band, which is formed by the Surface Plasmon Polariton and Magnetic Polaritons resonance jointly. This work provides design guidance for the application of this kind of periodic microporous metal in the field of thermal utilization and management.


2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Ning Cao ◽  
Shuqiang Lyu ◽  
Miaole Hou ◽  
Wanfu Wang ◽  
Zhenhua Gao ◽  
...  

AbstractEnvironmental changes and human activities can cause serious degradation of murals, where sootiness is one of the most common problems of ancient Chinese indoor murals. In order to improve the visual quality of the murals, a restoration method is proposed for sootiness murals based on dark channel prior and Retinex by bilateral filter using hyperspectral imaging technology. First, radiometric correction and denoising through band clipping and minimum noise fraction rotation forward and inverse transform were applied to the hyperspectral data of the sootiness mural to produce its denoised reflectance image. Second, a near-infrared band was selected from the reflectance image and combined with the green and blue visible bands to produce a pseudo color image for the subsequent sootiness removal processing. The near-infrared band is selected because it is better penetrating the sootiness layer to a certain extent comparing to other bands. Third, the sootiness covered on the pseudo color image was preliminarily removed by using the method of dark channel prior and by adjusting the brightness of the image. Finally, the Retinex by bilateral filter was performed on the image to get the final restored image, where the sootiness was removed. The results show that the images restored by the proposed method are superior in variance, average gradient, information entropy and gray scale contrast comparing to the results from the traditional methods of homomorphic filtering and Gaussian stretching. The results also show the highest score in comprehensive evaluation of edges, hue and structure; thus, the method proposed can support more potential studies or sootiness removal in real mural paintings with more detailed information. The method proposed shows strong evidence that it can effectively reduce the influence of sootiness on the moral images with more details that can reveal the original appearance of the mural and improve its visual quality.


2021 ◽  
Vol 48 (7) ◽  
pp. 0706001
Author(s):  
张文 Zhang Wen ◽  
白冰冰 Bai Bingbing ◽  
张砚曾 Zhang Yanzeng ◽  
陈聪 Chen Cong ◽  
邵齐元 Shao Qiyuan ◽  
...  

2017 ◽  
Vol 71 (10) ◽  
pp. 2367-2376 ◽  
Author(s):  
Jinfeng Zhou ◽  
Rongwu Wang ◽  
Xiongying Wu ◽  
Bugao Xu

Cashmere and wool are two protein fibers with analogous geometrical attributes, but distinct physical properties. Due to its scarcity and unique features, cashmere is a much more expensive fiber than wool. In the textile production, cashmere is often intentionally blended with fine wool in order to reduce the material cost. To identify the fiber contents of a wool–cashmere blend is important to quality control and product classification. The goal of this study is to develop a reliable method for estimating fiber contents in wool–cashmere blends based on near-infrared (NIR) spectroscopy. In this study, we prepared two sets of cashmere–wool blends by using either whole fibers or fiber snippets in 11 different blend ratios of the two fibers and collected the NIR spectra of all the 22 samples. Of the 11 samples in each set, six were used as a subset for calibration and five as a subset for validation. By referencing the NIR band assignment to chemical bonds in protein, we identified six characteristic wavelength bands where the NIR absorbance powers of the two fibers were significantly different. We then performed the chemometric analysis with two multilinear regression (MLR) equations to predict the cashmere content (CC) in a blended sample. The experiment with these samples demonstrated that the predicted CCs from the MLR models were consistent with the CCs given in the preparations of the two sample sets (whole fiber or snippet), and the errors of the predicted CCs could be limited to 0.5% if the testing was performed over at least 25 locations. The MLR models seem to be reliable and accurate enough for estimating the cashmere content in a wool–cashmere blend and have potential to be used for tackling the cashmere adulteration problem.


2011 ◽  
Vol 20 (03) ◽  
pp. 687-695 ◽  
Author(s):  
DOMINICK J. BINDL ◽  
MICHAEL S. ARNOLD

A photovoltaic photodetector harnessing near infrared band gap absorption by thin films of post-synthetically sorted semiconducting single walled carbon nanotubes ( s -SWCNTs) is described. Peak specific detectivity of 6×1011 Jones at -0.1 V bias at 1210 nm is achieved using a heterojunction device architecture: indium tin oxide/ ca. 5 nm s -SWCNT / 120 nm C60 / 10 nm 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) / Ag. The photodiodes are characterized by a series resistance of 2.9 Ω cm2 and a rectification ratio of 104 at ±1V. These results are expected to guide the exploration of new classes of solution-processable, mechanically flexible, integrable, thin film photovoltaic photodetectors with tunable sensitivity in the visible and infrared spectra based on semiconducting carbon nanotubes.


2022 ◽  
Vol 14 (2) ◽  
pp. 386
Author(s):  
Léa Schamberger ◽  
Audrey Minghelli ◽  
Malik Chami ◽  
François Steinmetz

The invasive species of brown algae Sargassum gathers in large aggregations in the Caribbean Sea, and has done so especially over the last decade. These aggregations wash up on shores and decompose, leading to many socio-economic issues for the population and the coastal ecosystem. Satellite ocean color data sensors such as Sentinel-3/OLCI can be used to detect the presence of Sargassum and estimate its fractional coverage and biomass. The derivation of Sargassum presence and abundance from satellite ocean color data first requires atmospheric correction; however, the atmospheric correction procedure that is commonly used for oceanic waters needs to be adapted when dealing with the occurrence of Sargassum because the non-zero water reflectance in the near infrared band induced by Sargassum optical signature could lead to Sargassum being wrongly identified as aerosols. In this study, this difficulty is overcome by interpolating aerosol and sunglint reflectance between nearby Sargassum-free pixels. The proposed method relies on the local homogeneity of the aerosol reflectance between Sargassum and Sargassum-free areas. The performance of the adapted atmospheric correction algorithm over Sargassum areas is evaluated. The proposed method is demonstrated to result in more plausible aerosol and sunglint reflectances. A reduction of between 75% and 88% of pixels showing a negative water reflectance above 600 nm were noticed after the correction of the several images.


2021 ◽  
Vol 893 (1) ◽  
pp. 012068
Author(s):  
K I N Rahmi ◽  
N Febrianti ◽  
I Prasasti

Abstract Forest/land fire give bad impact of heavy smoke on peatland area in Indonesia. Forest/land fire smoke need to be identified the distribution periodically. New satellite of GCOM-C has been launched to monitor climate condition and have visible, near infrared and thermal infrared. This study has objective to identify fire smoke from GCOM-C data. GCOM-C data has wavelength range from 0.38 to 12 μm it covers visible, near infrared, short-wave infrared and thermal infrared. It is relatively similar to MODIS or Himawari-8 images which could identify forest/land fire smoke. The methodology is visual interpretation to detect forest/land fire smoke using near infrared band (VN08), shortwave infrared band (SW03), and thermal bands (T01 and T02). Hotspot data is overlaid with GCOM-C image to represent the location of fire events. Combination of composite RGB image has been applied to detect forest/land fire smoke. GCOM-C image of VN8 bands and combination of thermal band in composite image could be used to detect fire smoke in Pulang Pisau, Central Kalimantan.


2018 ◽  
Vol 94 ◽  
pp. 1-8 ◽  
Author(s):  
Shinji Nakaya ◽  
Tomokazu Funahashi ◽  
Yohei Asakami ◽  
Ichiyu Fujio ◽  
Shuhei Takahashi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document